VoLUMIO B0C1J5ZDYY The Audiophile Music Player User Guide

VoLUMIO B0C1J5ZDYY The Audiophile Music Player

Product Information

Specifications

• Model: 48,&.67$57*8,'(
• Power: &217(176
• Features:
  • 1(7:25.&211(&7,21
  • $GGLWLRQDOLQIRIRU1HWZRUN&RQQHFWLRQ $&&(667292/80,2:(%8,
  • :HE8,DFFHVVDIWHUFRQJXUDWLRQ 92/80,2:(%8,0$,13$*(
  • 9ROXPLRPRELOHDSSV 92/80,2+(/3

Product Usage Instructions

Step 1: Setting Up
Unpack the product and ensure all components are included in the package.

Step 2: Powering On
Connect the power source to the device and press the power button.

Step 3: Operation
Follow the user manual instructions for specific operations and functionalities.
Refer to the provided guidelines for optimal performance and usage.

Frequently Asked Questions

1. Q: How do I troubleshoot if the device does not power on?
   A: Check the power source and connections to ensure everything is properly set up. If the issue persists, contact customer support.

2. Q: What should I do if I encounter error codes during operation?
   A: Refer to the user manual for error code explanations and troubleshooting steps. If needed, seek assistance from technical support.

DOWNLOAD

DOWNLOAD THE SOFTWARE & INSTALL.
You can download Volumio depending on the device you use, look the available ones and download it from here:

DOWNLOAD IT HERE
The Volumio image file is contained in a zip file, which shall be extracted. Extract the zip file and you will get a img file.

FLASH IT

You will need a SD Card (USB drive for X64) to place the Volumio .img file in it.
Follow the next steps to place Volumio on your SD Card

1. Flash the .img file onto your SD card (or USB thumb drive for X64) using Raspberry Pi Imager.
2. Open Raspberry Pi Imager, click on “Operating System”, choose “Customizing image” and select the .img file you just extracted.
3. Choose the target SD Card or USB thumb drive from “Internal SD card reader” menu and click Write
4. Volumio is now on your SD Card/USB Drive!

And done!
Volumio is now on your SD Card or USB drive!

NETWORK CONNECTION

After inserting your SD card (USB drive) in your device, you will access and control Volumio via anything that has a browser (PC, smartphone, tablet, etc).
The next step is to connect your device with browser to Volumio.

There are two options to connect Volumio:

1. Ethernet cable: simply attach an ethernet cable to it before starting it up.
2. Wireless Network with VOLUMIO HOTSPOT: If your device has wireless capabilities (and a supported Wireless card) Volumio will create a Wireless network.

ADDITIONAL INFO FOR NETWORK CONNECTION
Hotspot is a temporary way to use Volumio, it is better to connect it to the network to use it.
After connecting to the hotspot, you can select your wireless network in the Network options page when doing the configuration of Volumio on the web-Ul (step 5).
Once in Hotspot Mode, Volumio can be reached with IP 192.168.211.1 or via http://volumio.local as usual

ACCESS TO VOLUMIO WEB-UI
The web-Ul (web user interface), is where you see and control the Volumio software.
It can be accessed from any device with a browser: Tablets, PC, Mac, Android Phones, iPhones, Smart TVs, Ebook readers etc. Make sure you have the latest versions of their respective browsers.
For an optimal experience, Google Chrome is suggested.

FIRST WEB-UI BROWSER CONNECTION

USING ETHERNET

You can access Volumio Ul in two ways:

• By typing Volumio’s IP address in your browser. To find the IP address you can use these apps:
  ANDROID & iOS: FING

• By typing http://volumio.locall

USING VOLUMIO HOTSPOT
After connecting to the Volumio Hotspot, the Ul will appear automatically on your device screen. If it does not appear, you can access the same ways as you access with the ethernet listed above.

VOLUMIO CONFIGURATION ON THE WEB-UI

Once you have connected to Volumio through your network or via the hotspot you will see the Volumio web-Ul and be ready to do the configuration.

Configuration Steps:

1. Choose your Language
2. Name your Device (remember the username for later access to the web-Ul)
3. Configure your DAC – Audio Output
4. Choose the user experience (simplified or advanced features)
5. Configure your network
6. Configure NAS drive (Add music through USB drive or Network drive)
7. Donation to improve Volumio is always appreciated!

And… DONE!
Now your Volumio is ready to be used!

If using Volumio Hotspot: after finishing configuration, the Ul will close and you will need to access it through your browser

WEB-UI BROWSER CONNECTION AFTER CONFIGURATION

You can access the same way as you did the first time.

• By typing Volumio’s IP address in your browser. You can look for the IP address with these apps:
  ANDROID & iOS: FING
  Or

• After first configuration, you can type the name you create for your Volumio device (step 2 on Volumio configuration) http://VOLUMIONAME.local

VOLUMIO WEB-UI MAIN PAGE

Main WEB-Ul page

• Once your system is configured, you’ll see the main page of Volumio.
• Depending on the device you use to connect to Volumio, you’ll see the desktop page or the mobile page.
• Both provide the same features, but the user interaction is slightly different (to best match the connected device)

CONTROL VOLUMIO WITH
THE OFFICIAL APPS
The most convenient way to control your Volumio system is through the official apps.
The advantage is that they will automatically find your Volumio device on your network. Not to mention that by getting the apps, you will help the project with a little contribution.

QUESTIONS ABOUT VOLUMIO?
Whether you have any questions, or concerns about Volumio, you can ask for help at our Forum. There are many people from our team and the community willing to help.

Enjoy Volumio!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>