Tidoin 5 Tier Adjustable Metal Shelving Unit Instruction Manual
- June 30, 2024
- Tidoin
Table of Contents
- 5 Tier Adjustable Metal Shelving Unit
- Product Information
- Specifications:
- Step 1: Attach Corner Protectors
- Step 2: Install Beams
- Step 3: Connect Posts and Beams
- Step 4: Complete Installation
- Step 5: Assemble Shelves
- Q: Do I need any additional tools for assembly?
- Q: Can the shelves be adjusted in height?
5 Tier Adjustable Metal Shelving Unit
“`html
Product Information
Specifications:
-
Name: Storage Rack
-
Accessories: Corner protectors, long beams,
short beams, connectors, rubber mallet -
Material: Steel
-
Dimensions: Various sizes available
-
Color: Black
Product Usage Instructions
Step 1: Attach Corner Protectors
Attach all the corner protectors (E) to both ends of the posts
(A) using the rubber mallet (H). Ensure that the bigger circles are
facing upward.
Step 2: Install Beams
Install 4 long beams (C) and 4 short beams (D) on the posts
(A).
Step 3: Connect Posts and Beams
Install 4 connectors (F) on the top of 4 posts (A), then connect
another 4 posts using the connectors. Install short beams (D) to
connect the posts for stability.
Note: To prevent scratches, ensure parts F are
wrapped with tapes before installation.
Step 4: Complete Installation
Install long beams (C) on the posts (A).
Step 5: Assemble Shelves
Put on the shelves (B) to complete the assembly process.
Frequently Asked Questions (FAQ)
Q: Do I need any additional tools for assembly?
A: The rubber mallet provided in the accessories is sufficient
for assembly. No additional tools are required.
Q: Can the shelves be adjusted in height?
A: The shelves are fixed at a specific height and are not
adjustable. Ensure proper placement during assembly.
“`
Instruction Manual
Name
Accessories
Picture
QTY Name
Picture
QTY
A
8B
5
Post
Shelf
C
10 D
10
Long beam
Short beam
E
8F
Corner protector
4
Connector
Rubber mallet
STEP 1
Attach all the corner protectors E to the both ends of the posts A by rubber
mallet H
E ×4
Attention: The bigger circles should be put upward A×4
A×4
Attention: The bigger
E ×4
circles should be put upward
STEP 2
Install 4 long beams C and 4 short beams D on posts A
A×4
C×4 D×4
STEP 3
Install 4 connectors F on the top of 4 posts A, then connect another 4 posts
with the connectors, install short beams D
A F A
A×4 D
×6
F×4
A F
A
Short beams D and connectors F connect the posts A to ensure stability
Tips: To aviod part F causes some scratches, we warped them with tapes, thank you for your patience
STEP 4
Install long beams C on posts A
C×6
STEP 5
Put on the shelves B
B ×5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>