AVCOMM 4006GX2 4+2G 1000M Unmanaged Ethernet Switch Installation Guide

AVCOMM 4006GX2 4+2G 1000M Unmanaged Ethernet Switch

Quick Installation Guide

4006GX2 4+2G 1000M Unmanaged Ethernet Switch www.avcomm.cn

Overview
The 4006GX2 is a 4-port 10/100/1000Base-TX RJ-45 and 2-port 1000Base-X unmanaged Ethernet switch with reverse polarity protection of AC or DC input. It has ingenious appearance design and supports DIN Rail-mounted/wall-mounted to facilitate in various industrial network applications.

Package Checklist

• 4006GX2 Ethernet Switch
• Mounting Bracket
• Screws

Installation
Wall-mounted: Tighten the metal fixation plate by screws, then hang the machine with locked metal strip onto wall or machine cabinet.

Wiring the Power Input

1. Insert the positive and negative wires into the V+ and V- contact on the terminal block connector.
2. Tighten screws when the wire is connected.
3. Connect the power wires to suitable DC Switching type power supply.

Appearance

1. Mounting bracket
2. Grounding screw
3. Power & relay alarm input terminal
4. Power indicator PWR
5. Alarm indicator FAIL
6. Fiber indicator FDX
7. Fiber port
8. Network port indicator
9. Network port LED PWR FDX FAIL RJ45 Status
   • Green On – Power is in normal condition
   • Green Off – Power is abnormal or power failure
   • Green On – Link is ready
   • Green Blinking – Link is established
   • Green Off – Link is not ready or link failure
   • Red On – With alarm outputy
   • Red Off – Without alarm output
   • Green On – 1000Base network is ready
   • Amber On – 1000Base network is established
   • Green On – 10/100Base network is established or link failure
   • Amber Blinking – 10/100Base network is established
   • Amber On – Link is not ready or link failure
   • Green Off –
   • Amber Blinking –
   • Amber Off –

Safety Precautions

• Keep DC power off before connecting to the terminal block connectors and ensure all connections are secure established.
• Do make sure that models connect to the corresponding supply voltage. The device is to be supplied by Limited Power Supply. The relay contact supports 0.5 A current, DC 24V.
• Do not touch the surface of the switch while it is in operation!

Support
At AVCOMM, you can use the online service forms to request support. The submitted forms are stored in the server for AVCOMM team members to assign tasks and monitor the status of your service. Please feel free to write to www.avcomm.cn if you encounter any problems.

Warranty

The product comes with a limited warranty. Please refer to the warranty documentation for more information.

Disclaimerwww.avcomm.cn

Product Usage Instructions

1. Install the switch by wall mounting or using a DIN Rail mount.
2. Connect the positive and negative wires to the V+ and V- contacts on the terminal block connector.
3. Connect the power wires to a suitable DC switching type power supply.
4. Ensure that the power and network cables are securely connected to the switch.
5. Check the LED indicators to ensure that the switch is functioning properly.
6. Do not touch the surface of the switch while it is in operation.

Overview

4006GX2 is a 4-port 10/100/1000Base-TX RJ-45 and 2-port 1000Base-X unmanaged Ethernet switch with reverse polarity protection of AC or DC input. It has ingenious appearance design and supports DIN Rail-mounted/wall-mounted to facilitate in various industrial network applications.

Package Checklist

• 1 x Product Unit
• 2 x Mounting plate
• 6 x Screw
• 1 x Quick Installation Guide

Installation

DIN Rail-mounted
To mount the switch on the DIN Rail track, insert the upper end of the DIN‐Rail clip into the back of the DIN‐Rail track from its upper side and lightly push the bottom of the DIN‐Rail clip into the track. The DIN Rail should comply with DIN EN50022 standard. Using wrong DIN rail may cause unsafe installation.

Grounding Screw
For avoiding system damage by noise or electric shock, establish a direct connection between the grounding screw and the grounding surface prior to connecting devices.

Wall-mounted
Tighten the metal fixation plate by , then hang the machine with locked metal strip onto wall or machine cabinet.

Wiring the Power Input

1. Insert the positive and negative wires into the V+ and V- contact on the terminal block connector.
2. Tighten screws when the wire is connected.
3. Connect the power wires to suitable DC Switching type power supply.

Appearance

1. Mounting bracket
2. Grounding screw
3. Power & relay alarm input terminal
4. Power indicator PWR
5. Alarm indicator FAIL
6. Fiber indicator FDX
7. Fiber port
8. Network port indicator
9. Network port

Indicator

__

PWR

| Green On| Power is in normal condition
Green Off| Power is abnormal or power failure
__

FDX

| Green On| Link is ready
Green Blinking| Link is established
Green Off| Link is not ready or link failure
__

FAIL

| Red On| With alarm output
Red Off| Without alarm output
__

__

__

__

RJ45

| Green On

Amber On

| 1000Base network is ready
Green On

Amber Blinking

| 1000Base network is established
Amber On

Green Off

| 10/100Base network is established or link

failure

Amber Blinking| 10/100Base network is established
Amber Off| Link is not ready or link failure

Safety Precautions

• ➢ Keep DC power off before connecting to the terminal block connectors and ensure all connections are secure established.
  ➢ Do make sure that models connect to the corresponding supply voltage. The device is to be supplied by Limited Power Supply. The relay contact supports 0.5 A current, DC 24V

• Do not touch the surface of the switch while it is in operation!

Support

At AVCOMM, you can use the online service forms to request the support. The submitted forms are stored in server for AVCOMM team member to assign tasks and monitor the status of your service. Please feel free to write to www.avcomm.cn if you encounter any problems.

Warranty

5-year Global warranty are available for AVCOMM products assuring our customers that the products shall remain free from defects in workmanship or materials and conform in all material respects to AVCOMM specifications, or purchasers supplied and accepted specifications. The warranty is limited to the repair and/or replacement, at AVCOMM sole discretion, of the defective product during its warranty period. The customer must obtain a Return Merchandise Authorization (RMA) approval code prior to returning the defective Product to AVCOMM for service. The customer agrees to prepay shipping charges, to use the original shipping package or equivalent, and to ensure the product or assume the risk of loss or damage in transit. repaired or replaced products are warranted for ninety (90) days from the date of repair or replacement, or for the remainder of the original product’s warranty period, whichever is longer.

Disclaimer

AVCOMM reserves the right to make changes to this QIG or to the product hardware at any time without notice. It is the user’s responsibility to determine whether there have been any such updates or amendments herein.
Defects, malfunctions, or failures of the warranted Product(s) caused by damage resulting from unforeseeable incidents (such as lightings, floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power line disturbances and surge, host computer malfunction and virus, incorrect power input, or incorrect cabling, incorrect grounding and damages caused by misuse, abuse and unauthorized alteration or repair are not warranted.

www.avcomm.cn

References

• 首页 | 安通恩创信息技术（北京）有限公司

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>