Pia Ricco 1JAY-50334BN 4-Light Polished Nickel Cage Mini Pendant Instruction Manual
- October 30, 2023
- Pia Ricco
Table of Contents
1JAY-50334BN 4-Light Polished Nickel Cage Mini Pendant
Instruction Manual
Assembly Instructions
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED HARDWARE INCLUDED *PARTS SHOWN MAY DIFFER SLIGHTLY PER
LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Attach the iron rack onto fixture using ball nuts. STEP 2
Attach the end of the chain to the loop on the fixture. STEP 3
Use the mounting screws to attach the (not included). mounting unit to the
junction box STEP 4
Pass the chain and the branch wires through the screw collar ring and canopy.
Feed the branch wires through the pipe nipple on the mounting unit and attach
the end of the chain to the mounting unit. STEP 5
Make the electrical connection from the junction box to the fixture. Connect
the ground wire to the mounting unit using the preinstalled green ground
screw. Then, connect the positive, negative and ground wires with the supplied
wire nuts. Secure with electrical tape STEP 6
Secure the canopy to the mounting unit with the screw collar ring. STEP 7
Install bulbs (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>