KLARSTEIN 10032103 Vapoair Ultrasonic Humidifier Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10032103 Vapoair Ultrasonic Humidifier
TECHNICAL DATA
- SAFETY INSTRUCTIONS
PRINCIPLE OF OPERATION
Features:
CORRECT HUMIDITY LEVEL
OPERATION
Ionizer
CLEANING
TROUBLESHOOTING
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10032103 Vapoair Ultrasonic Humidifier

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the items and cautions mentioned in the operation and installation instructions are not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Artikelnummer	10032103
Stromversorgung	220 -240 V~ 50/60 Hz
Stromverbrauch	110 W
Wasserbehälterkapazität	5,5 l
Verdunstungsrate	≥300ml/H
Geräuschpegel	≤35dB(A)

SAFETY INSTRUCTIONS

Read all the safety instructions carefully before use and keep this instruction manual for future reference: Warning: Please be aware of the following points or you might be in danger of electrical shocks or burns to your body.

Never disassemble the base unit without consulting qualified personnel.
If the electrical cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not add detergents or chemical solutions which are not made by our company to the unit.
Unplug unit during filling, cleaning and maintenance.
Keep detergents and chemical solutions away from children.
Do not change attachment without express permission from our company. Otherwise, you might cause a hazard.
If any abnormal smell develops during normal operation, please switch off and disconnect power supply. Have the unit serviced by qualified personnel.
If detergents & chemical solutions splash into mouth or eyes when cleaning with water, consult a doctor to prevent serious injury.
Never touch water in the water basin or components in the water when the unit is in operation.
Never switch on when there is no water in the water basin.
Never scrape Transducer cpl on your own.
Never clean Transducer cpl with detergents or chemical solutions that are not made by our company.
To avoid damaging components, never let water splash into inner base unit.
Care should be taken when using the unit due to the emission of hot water vapor.
The unit must be disconnected from the power supply before cleaning and maintenance.
The unit must be disconnected from the power supply before cleaning or other maintenance.
This unit can be used by children aged 8 and above if they have been given supervision or instruction concerning use of the unit in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the unit and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be performed by children without supervision.
Children should be supervised to ensure that they do not play with the unit.
Indoor use only.

PRINCIPLE OF OPERATION

Your Ultrasonic Humidifier uses an ultrasonic high-frequency oscillator to break up water into tiny water particles with the diameter of about 1–5um. The ventilation system blows these water particles into the dry air where they evaporate to add the required humidity.The smooth and even fog is clearly visible as it comes out of the unit.

Features:

High-efficiency humidification with large output.
Low energy consumption. Save 85–90 percent of electricity over normal stream humidifier.
Long lifetime
Automatic control of humidity level, low-water security protection.
Heating Function: Touch the Heating symbol to make warm mist. Press again to stop the heating function.
Plasma: Touch the Plasma symbol for Plasma to increase the number of Plasma elements. Press again to stop the Plasma function.

CORRECT HUMIDITY LEVEL

Definition of relative humidity: Relative humidity is the amount of water vapor in the air, expressed as a percentage of the maximum amount that the air could hold at the given temperature. We normally express this with % RH, like 45% RH. The air always contains some water vapor. Its percentage depends on the meteorological conditions. The higher the temperature, the more water vapor the air can hold. For this reason, we use the concept of “relative humidity”. When cold air is heated to a comfortable temperature in winter, the relative percentage of the water vapor falls. This means that the relative humidity drops. In order to maintain a comfortable and healthy environment at home, we need to add water or water vapor to the room air that’s air humidification. Ideal relative humidity levels under different situations:

The most comfortable RH for human being 45-65 % RH
Ideal RH for prophylactic and curative purpose: 40-55 % RH
Computer and telecom equipment: 45-60 % RH
Furniture and musical instruments: 40-60 % RH
Library, art gallery and museums: 40-60 % RH

Functions

The percentage of water vapor in a given space with a given air temperature is called relative humidity, usually expressed as %RH, e.g., 45%RH. Air contains more or less water vapor. The proportion of water vapor in the air varies according to different air temperatures. The higher the temperature, the more water vapor the air can hold.
In the winter, cold air enters the room and warms up. As a result, the relative humidity decreases. If you want to maintain healthy environmental humidity, we need to increase the amount of water vapor in the air. The humidifier does that for us.
Relative humidity in different living environments:
- Bedroom, living room: 45–64%RH
- Patient’s room: 40–55RH
- Room with computer or experimental equipment: 45–60%RH
- Room with piano: 40–60%RH
- Museum, exhibition hall, and library: 40–50%RH

Water filter

The plastic component contains NANO-SILVER material to prevent the growth of bacteria.
Ceramic filter can soften hard water. Ceramic filter demineralizes the water.

OPERATION

Before use

Upon First Operation, allow the unit to sit at room temperature for half of an hour before running.
It is recommended to operate the unit below a temperature of 20 °C and a relative humidity of less than 80% RH.
Use clear water not over 40 °C
Check the water basin to make sure it is clear.

Operation

Put the unit on a flat surface.
Fill the water into the water tank, and then tighten the tank cover.
Put the water tank on the main base, and disable the child safety lock.
Check if the rated voltage is the same as the input voltage, and plug into the socket. The symbol ON/OFF will be lit.
Touch the symbol ON/OFF on the unit. All function button will be backlit and the background LED light will be on. The unit will begin to work in AUTO mode. Display shows AUTO symbol, current temperature, current humidity and the vapor output level symbol.
Touch the symbol MAX-MIN , AUTO mode is cancelled and the mist output is in the first speed. You may select 3 desired levels of mist volume. The corresponding pillar symbol will appear on the display. 1 pillar: Low 2 pillars: Medium 3pillars: High. Touch the symbol again, to choose AUTO mode. On the remote control, it is the same.

Ionizer

Touch the symbol , the Anion generator works. On the LED display, it shows the shape of trees. Touch again to stop the function.Iionizer
Touch the symbol , the Anion generator works. On the LED display, it shows the shape of trees. Touch again to stop the function.Iionizer
Touch the symbol , the Anion generator works. On the LED display, it shows the shape of trees. Touch again to stop the function.

Light
Long-press the symbol , it can also control the water tank light switching on or off.

Heating
Touch the symbol , the warm mist will come out after 10~15 minutes. On the LED display, it shows the same symbol . Touch again to stop the function. Mist will become cool.

Humidity control
Constant humidity: Before you touch the symbol , LED display shows the current humidity. You may set the humidity arranged from 30%RH to 75%RH. Touch once, it will increase by 5%RH. The When it reaches 75%RH, touch again, it will show “Co” and flash for 3 seconds to exit humidity setting function. After you set the expected humidity, the machine will keep the memory and confirm after 5 seconds. 5 seconds later, LED display shows the current humidity. Touch again, it shows the expected humidity setting. If the expected humidity is less than the current humidity, the machine will be in sleeping state. But if the expected humidity is higher than the current humidity, the humidify function will work.

Timer Setting
There are 12 timer setting: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 hours. Touch the symbol TIMER l . The LED display will show the desired timer setting. Touch until “Co” is displayed on the LED. The timer setting is cancelled. The timer shows the remaining time of operation and decreases by 1 hour, i.e., if the timer is set for 12 hours, the LED display shows 11 after one hour. Touch TIMER symbol to see what time has been set. Touch again to set timer again.

Auto Shut-Off
Once the water in the basin is too little to keep the machine working, the machine will automatically stop working. LED shows the shape of lack of water . Refill the water, and the machine will restart. If don’t refill water within 15 minutes, the machine will automatically power off.

Humidity control

No matter in any working mode, when the environment humidity reaches 90%, the machine will be in sleeping state. When the environment humidity is under 85%, the machine will work again.

Display shut-off

No matter in any working mode, if no any operation in about 15 seconds, the display will turn dim.

Remote control (Batteries are not included in the scope of delivery.)

On the remote controller, the related symbol controls the corresponding function, except the water tank light. Water tank light cannot control by it.

How to insert the remote control batteries

Flip the remote on its side.
Press the battery release on the bottom edge of the remote.
Grasp the battery socket and pull the battery out.
Insert a lithium battery type CR2025.

CLEANING

We recommend:

Use cold boiled water or distilled water.
Clean the transducer, water tank and basin unit every week.
Change the water in water tank more often to keep it fresh.
Make sure to pull out the water from the water tank and dry the water basin before you store the unit unused for a long period of time.
Clean the whole unit and make sure that all parts of the unit are dried completely before unused for longer period of time.

How to clean the transducer

Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5 minutes.
Brush off the scale from the surface.
Rinse the transducer with clean water.

How to clean the basin unit:

Clean the water basin with soft cloth and the cleaning abluent if there is scale in it.
If the scale is covered on the security switch, drop the cleaning abluent on the scale and clean it out with the brush.
Rinse the water basin with clean water

TROUBLESHOOTING

Problem	Possible causes	Solution
Power lamp off, does not work	****

No power supply

| Connect power supply, switch on
Power lamp on, no mist outlet with fan| No water in water tank| Fill water tank with water
Security switch is too loose| Tighten the switch

Abnormal mist smell

| ****

New unit

| Remove water tank, open cover, let it stand 12 hours in a cool place
Dirty water or water sitting too long| Clean water tank, fill with

fresh water

Power lamp on, unit doesn’t work| ****

Too much water in the water basin

| Remove some water from the water basin, tightly close the cover of water tank

Mist fog is too low

| Too much scale in the water basin| Clean transducer
Water is too dirty or water left in the tank too long| Clean water tank, replace with fresh, clear water

Abnormal noise

| Resonance in water tank when water is too low| Fill water tank with water
---|---|---

Unit is on a unstable surface

| Move the unit to a stable flat

surface

Mist fog coming out from around nozzle| ****

There are gaps between the nozzle and water tank

| Immerse the nozzle in water for a time, and then attach it to the socket on water tank

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electricaland electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.