VEVOR ZS3SJ, ZSB02 Electric Car Jack Floor Jack User Manual

: October 30, 2023
: VEVOR

VEVOR ZS3SJ, ZSB02 Electric Car Jack Floor Jack

VEVOR ZS3SJ, ZSB02 Electric Car Jack Floor Jack

MODEL:ZS3SJ+ZSB02

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

(Note: Kits containing models ZS3SJ and ZSB02)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.

**ELECTRIC SCISSOR JACK(ZS3SJ)**

Safety Warning

Please read the “OPERTION MANUAL” carefully and understand all the instruction before operation.
Don’t move the car while the electric car jack is working works status carefully.
Over loading operation is forbidden, without other safety devices.
The electric car jack should be placed only on smooth and solid ground. keep you body away from the car while the electric car jack is working.
The electric car jack is unsuitable for long continuous operation due to it is machine.
It is prohibited to lift the person.
Do not overhaul the machine to avoid destroying the machine and lose the right of Guarantee.
While taking power directly from the vehicle battery(12V DC power supply) with battery clip, must pay more attention on positive and negative, it can not be wrong, otherwise it will burn electric lifting jack remote control handle.
Do not work for long time, when not using, please cut off the power.
Avoid the machine dropping into the water and using in the bad condition.
Check the power to match well with 12V Car Cigarette Lighter before using.
Take notice of the smooth floor and loading capacity when using, also pay attention to finding the exact loading position of the car before the operation of lifting.
Do not overload when using the machine, make sure to keep upright with the lifting car at the same time, never operate it aslant.
Please check if the name plate and warning indication sticker are in good condition.
It can only be used for car maintenance, not for other purposes.

CAUTION: The maximum loading car weight is 3T model!

WARNING

Please pay special attention to the following position which may nip your finger. (FIG 1)

Warning

ATTENTION

If the electric jack can not work after the car be lifted .you can insert the hand crank into the cover into the cover of gear box to lower the electric jack (FIG 2)

Attention

Advantages

The machine is with the fashion and beautiful design, and adopts the advanced electric machinery technology. It is low noise, quick speeding, stable lifting performance and so on.

Considering the safety, the machine designs self-locking power structure and Emergency cranking function That is to say: when the power has been disconnected, the lifted jack will not fall , only re-connecting the power, the jack will go on working, or using the hand wrench to fall the car, which will protect the operator’s personal safety effectively. The machine is widely used for Family Car, Go-anywhere Vehicle, Multi Purpose Vehicle.

Operation Instructions

Warning :Please follow the OPERATION MANUAL strictly.

When changing tire in an emergency case, warning light up, please park the car on a firm , rigid and flat ground (no more than 6 degrees). pull the brakes, stabilize the tires with tire pads or other anti-skid materials, to make sure the vehicle has been locked safely.
The electric lifting jack is connected to the 12V power supply by two ways:
Connected by the cigarette lighter: The lighter plug cable into the car cigarette lighter, the other end of the electric jack into the socket on the control handle. (Note: the cigarette lighter fuse rated current of not less than 12A).
(Recommended) Connected by Vehicle battery directly: When fuse current is less than the fuse within the cigarette lighter. 12A, the lighter plug cord into the cigarette lighter socket with one end of the battery clip, and the clip sandwiching battery red “+” on the (positive) black clip and battery “-” (negative electrode) is connected, and then the other end into the cigarette lighter plug socket on the electric lifting jack control handle. (At this time, the engine of the vehicle should be in working condition)
The saddle of the electric car jack should be placed against the right bottom of the car .
The saddle of the electric car jack should be placed against the right bottom of the car. Press “^”on the switchboard and confirm that the saddle is connected with the right bottom position of the car press “^” continuously till the car is jacked to and ideal height. (FIG3)
Press” v” on the switchboard to lower the car completely after preparing .
Press “v” on the switchboard to adjust the position of the electric car jack when the saddle is not toughed on the right bottom position of the car.
Of course the electric car jack you bought also is equipped with wireless remote control function, you also could select the wireless remote control to operate the rising and descending tasks (the distance within 10m)!
Counter-clockwise turning will lower the jack easily when no power supply.

Technical Data

Model| Input Voltage| Rate Current| Rate Power| Max. Loading Car Weight| Lifting Rang| Fuse| Working Temperature
---|---|---|---|---|---|---|---
ZS3SJ| DC12V| 15A| 180W| 3T| 12-37/ 17-42cm| 15A| -20 ~ +70℃

Assembly Sketch And Component List

HOW TO REPLACE THE FUSE IN THE 12V PLUG

To replace the fuse in the plug ,twist off the upper cover.
Remove the faulty fuse and insert a new one.
Twist the cover back on the plug. A spare fuse is enclosed in the case.

Operation Scope

The electric car jack is used for cars.

Operation Environment

The electric cart jack is applicable below 5000m see level and from -20 °C to 70°C under natural temperature, it is prohibited to be operated the circumstances and magnetic and explosive fields.

Operation Duration

It is 2 years.

Maintenance

The electric cart jack must be maintained and repaired by professionals according to the OPERTION MANUAL

Put lubricant on the screw bolt of electric car jack periodically.
Keep it clean and dry after operation.
Any change in the structure ,which might affect it is safety is forbidden.

Storage

It is stored under the temperature from 0-70°C with humidity less than 70% To avoid severe collision ,upside down and water during transportation.

Trouble Analysis

T roub l e	Causes	Measure
The electric jack dose not work or the car cannot be jacked up ..	A.
Overloaded	A. Reduce the weight
B. No electricity in the lighter	B. Check rt or insert the plug

correctly
C. Fuse is broken| C. Chang a good fuse

**Electric Wrench (ZSB02)**

Operation

Turn on the power of the car.
Plug into cigarette lighter or connect with the car’s battery.
Choose the proper socket to the wrench’s shaft. (FIG.1)
According to thread direction, press switch for tightening or loosening. (Do the reverse for L. T. screw) (FIG.2)
Press left side of the switch (with mark II) to start operation, and each nut will be loosened after two or three times of “clatter” sound.
NB: If the wrench pins with out impacting. Please start engine for maximum voltage.
Press right side of switch (with mark) to tighten nuts, it will be tight enough after two or three times of “clatter” sound.

OPERATION CHART

Choose and apply the correct socket to the wrench head (FIG.1)
Apply the wrench to wheel Nut and Press the Upper side of the switch (with mark ”-” to start. Nut will be loosened i n 3 seconds . (FIG.2)

HOW TO REPLACE THE FUSE IN THE 12V PLUG

To replace the fuse in the plug, twist off the upper cover.
Remove the faulty fuse and insert a new one.
Twist the cover back on the plug. A spare fuse is enclosed in the case.
This tool can only be applied to DC12v Power.
Do not use the tool continuously more than 10 minutes.
Do not touch the shaft head with hand during operation.
When using the clips to car’s battery, please make sure to connect clips to correct terminals of the battery. Red to positive and black to negative.
Do not use sockets not included in this kit.
New fuse’s rated current should be or less than 12A.
Turn off the switch 3-5 seconds after the “clatter” sound is heard, the continue the operation.
The manufacturer recommends checking the tightness of the wheel nuts with a wheel brace after tightening with the impact wrench. The impact wrench is only for emergency use. Use a professional torque wrench to recheck the correct torque as soon as possible.
The manufacturer takes no responsibility for incorrect usage of this product and the impact wrench are only designed to loosen and tighten car wheel nuts’.

Troubleshooting

DANGER – Risk of fatal electric shocks.

Only have repairs to the tool or the power cord carried out by a professional experience technician.

Impact wrench will not start.
Is the car battery dead?
Is the cigarette lighter faulty?
Is the fuse in the impact wrench faulty?
Wheel nut cannot be unscrewed or tightened.
Has the correct rotational direction been selected?

Package contents

No.	Name	Quantity
1	Electric scissor jack	1
2	Electric wrench	1
3	Long top head	1
4	Short top head	1
5	Power line(3.5m)	1
6	Hand rocker lever	1
7	Fuse wire	3
8	Glove	1
9	Battery clip	1
10	Socket	2
11	Ripping bar	1
12	Carrying case	1
13	User manual	1