elk HOME H0019-9569 62 Inch High 1-Light Floor Lamp Instruction Manual

elk HOME H0019-9569 62 Inch High 1-Light Floor Lamp

Product Information

• This is a portable lamp that comes with a polarized plug.
• The lamp should be installed in accordance with the National Electrical Code (NEC) and all local code specifications.
• It is recommended to have a certified electrician install the lamp if you are not familiar with code requirements.
• To prevent shock, only plug in the lamp after the lamp assembly is complete.
• The lamp has a harp (B), saddle (D), harp caps (C), shade (E), finial (F), and a socket (A).
• The lamp requires a bulb (not included) with a wattage that does not exceed the maximum bulb wattage marked on the socket of the lamp.

Product Usage Instructions

1. Before assembly, remove all parts and part packages from the box. If anything is missing, please contact the retailer from which the product was purchased.
2. Squeeze ends of harp (B) inward. Insert each end of harp (B) into each end of saddle (D). Lower harp caps (C) over ends of saddle (D).
3. Lower shade (E) down over harp (B). Pass hole in top of shade bracket over threaded stud on top of harp (B).
4. Carefully screw finial (F) onto threaded stud on harp (B). Tighten finial (F) to secure shade (E) in place. DO NOT over tighten.
5. Insert recommended bulb (not included) into socket (A). Verify correct bulb wattage marked on socket of lamp. DO NOT exceed maximum bulb wattage.

If you have any questions, please call 800-613-3261 M-F 8:00AM-6:00PM ET. Item number for this product is H0019-9569.

INSTALLATION INSTRUCTION

• WARNING:
• This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. If you are not familiar with code requirements, installation by a certified electrician is recommended.
• CAUTION: To prevent shock, only plug in lamp after lamp assembly is complete.
• WARNING: This portable lamp has a polarized plug (one blade is wider than the other). As asafety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Never use with an extension cord unless plug can be fully inserted. Do not attempt to work around this safety feature.
• Before assembly, remove all parts and part packages from box. If anything is missing, please contact the retailer from which the product was purchased.

1. Squeeze ends of harp (B) inward. Insert each end of harp (B) into each end of saddle (D). Lower harp caps (C) over ends of saddle (D).
2. Lower shade (E) down over harp (B). Pass hole in top of shade bracket over threaded stud on top of harp (B).
3. Carefully screw finial (F) onto threaded stud on harp (B). Tighten finial (F) to secure shade (E) in place. DO NOT over tighten.
4. Insert recommended bulb (not included) into socket (A).
   WARNING: Verify correct bulb wattage marked on socket of lamp. DO NOT exceed maximum bulb wattage.

elkhome.com

Documents / Resources

| elk HOME H0019-9569 62 Inch High 1-Light Floor Lamp [pdf] Instruction Manual
H00199569, H0019-9569, H0019-9569 62 Inch High 1-Light Floor Lamp, 62 Inch High 1-Light Floor Lamp, High 1-Light Floor Lamp, 1-Light Floor Lamp, Floor Lamp, Lamp
---|---

References

• elkhome.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>