elk HOME D4729 One Light Table Lamp Instructions
- October 30, 2023
- elk HOME
Table of Contents
elk HOME D4729 One Light Table Lamp
Product Information:
- This product is a portable lamp.
- The lamp has a polarized plug (one blade is wider than the other) for safety purposes.
- The lamp comes with a stem, socket, harp, saddle, harp caps, shade, and finial.
- The lamp requires a recommended bulb (not included).
- The maximum bulb wattage should not be exceeded.
- If you have any questions or concerns, you can call the manufacturer at 800-613-3261 from Monday to Friday between 8:00 AM to 6:00 PM ET.
- The item number for this product is D4729.
WARNING: This fixture is intended for installation in accordance with the
National Electrical Code (NEC) and all local code specifications. If you are
not familiar with code requirements, installation by a certified electrician
is recommended.
CAUTION: To prevent shock, only plug in lamp after lamp assembly is
complete.
WARNING: This portable lamp has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not attempt to work
around this safety feature.
Before assembly, remove all parts and part packages from box. If anything is
missing, please contact the retailer from which the product was purchased.
Assembling
- Pull lamp cord from lamp base (B). Make sure lamp cord is pulled taut.
- Screw stem on bottom of socket (A) onto top of lamp base (B). CAUTION: DO NOT pinch lamp cord between stem and lamp base (B).
- Squeeze ends of harp (C) inward. Insert each end of harp (C) into each end of saddle (D). Lower harp caps (E) over ends of saddle (D).
- Lower shade (F) down over harp (C). Pass hole in center of shade bracket over threaded stud on top of harp (C).
- Carefully screw finial (G) onto threaded stud on harp (C). Tighten finial (G) to secure shade (F) in place. DO NOT over tighten.
- Screw recommended bulb (not included) into socket.
WARNING: Verify correct bulb wattage marked on socket of lamp. DO NOT exceed maximum bulb wattage.
ANY QUESTIONS
CALL: 800-613-3261
M-F 8:00AM-6:00PM ET
elkhome.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>