BOSTITCH B8E-VALUE Impulse 45 Sheet Electric Stapler Value Pack Instruction Manual
- June 5, 2024
- Bostitch
Table of Contents
- BOSTITCH B8E-VALUE Impulse 45 Sheet Electric Stapler Value Pack
- Features:
- Specifications:
- Important Note Before Beginning:
- Low Staple Supply Indicator Light
- General Safety Precautions for Electric Stapler
- Stapling
- How to Load Staples:
- If Stapler Jams
- 7 Year Limited Warranty U.S.A. and Canada Only
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BOSTITCH B8E-VALUE Impulse 45 Sheet Electric Stapler Value Pack
Congratulations on your purchase of this premium quality Electric Stapler. With proper use and care, this stapler will serve you well for many years.
IMPORTANT:
Please read these instructions completely and carefully before operating your new electric stapler. Keep this instruction sheet for future reference.
Features:
- Low staple supply indicator lightto let you know when it is time to reload staples
- Super-sensitive optical trip for sure fire accuracy
- High impact plastic housing
- Easy push-button staple loading
- Loads a full strip of 210 B8 staples. (STCRP2115 1/4 or STCR2115 3/8)
- Maximum capacity 45 sheets of 20 lb. bond paper
Specifications:
- Operating Voltage – 120V AC 60 Hz
- Operating Current- 3.0 AMPS
- Staple Size – B8 1/4″, B8 3/8″
- Magazine Capacity -220 Staples
- Stapling Capacity -2 to 45 sheets
- of 20 lb. bond paper
- Maximum Stapling Speed – 1 per second
- Operation stapling rate – 20 staples per minute, operation continuity after 30 minutes shall have 10 minutes rest, but not recommended for daily continuous use in a manufacturing or production environment.
- Dimerstons-3Wx 5:62H x 8:504″‘L-
- Weight-2. 2.341lb. 37.40z.
- Throat Depth – 3/8″
Important Note Before Beginning:
This unit is to be used on 120V AC outlets only. Always unplug your stapler
before cleaning or attempting to clear a staple jam. The stapling capacity has
been
designed to staple a maximum of 45 sheets of standard bond paper.
The optical sensor firing ate mechanism may not actuate when in direct
sunlight.
Low Staple Supply Indicator Light
This stapler is designed to indicate when staple supply is low. (A blue light will come on at the top of the stapler and will remain on until staples are inserted and magazine is closed.)
General Safety Precautions for Electric Stapler
- Do not operate electric stapler with a damaged cord or plug, after stapler malfunctions, or has been damaged in any manner.
- Unplug unit from outlet before cleaning or removing a staple jam. Grasp plug, not the cord, when disconnecting stapler from outlet.
- Do not allow electrical components to get wet.
- Keep fingers, hair, jewelry, and foreign objects, etc. away from stapler opening.
- Do not disassemble the stapler. Should your stapler require servicing at any time, refer to warranty.
- This stapler is not intended for heavy commercial use. Do not use the stapler for stapling hard materials like cardb0ard or heavy plastic.
- Please follow the safety precautions for operation. Circumstances against safety precautions might affect stapling function.
Do not operate stapler without inserting paper, and refrain from double stapling (stapling over a staple).
Stapling
- Insert paper directly under magazine.
- Be sure to cover staple clincher.
- When stapling 2-20 sheets of paper, use STCRP2115 1/4
- When stapling 20-45 sheets of paper, use STCR2115 3/8 only.
How to Load Staples:
For best performance use Bostitch staples, model STCRP2115 1/4 or STCR2115 3/8
-
Press the magazine release button. TheTmagazime exterTsion wir ejeci Outward.
NOTE: DO NOT press release button with your face directly in front of the stapler. t may resuit in injury. -
Grasp the magazine extension and pull forward to ensure a full strip of staples can be inseted.
CAUTION: There may be staples in magazine. Be sure they are in position before adding new strip of staples. Make sure staple strip is correctly inserted and propery seated before closing. -
Push the magazine back into the housing until it is firmly locked in position.
NOTE: To prevent damage to the driver element, the magazine must be completely pushed back and locked before stapling.
If Stapler Jams
All staplers can jam from time to time. To clear a jam, follow these four easy steps:
- Remove AC plug from the outlet betore removing jammed staples.
- Press magazine release button. Magazine should eject.
- If staple magazine does not eject, check to ensure driving element is not down in magazine. if so, use pen or similar object to disengage the driving element from magazine.
- Press magazine release button. Magazine should now eject.
7 Year Limited Warranty U.S.A. and Canada Only
Effective December 1, 2005 Bostitch”warrants to the original retail purchaser
that the product purchased is free from defects in material and workmanship,
and agrees to repair or replace, at Bostitch’s option, any defective Bostitch
branded office product (7) years from date of purchase. Warranty is not
transferable. Proof of purchase date required. Ihis warranty cOvers only
damage resulting from defects in material or Workmanship; it does not cover
Conditions or malfunctions resulting from normal wear, neglect, abuse,
accident or repairs attempted or made by other than our national repair center
or authorized warranty service centers. Driver blades, sharpener cutters,
punch heads, and cuting discs are considered normally wearing parts. You are
responsible for the costs of shipping the defective product to Bostitch or its
designated repair center. For optimal performance of your Bostitch products,
always usegenuine Bostitch staples and replacement parts. THIS WARRANTY IS THE
EXCLUSIVE WARRANTY OF BOSTITCH® AND IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH® SHALL NOT BE LIABLE FOR ANY
DIRECT, INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions
may not apply to you. his warranty gives you specific legal rights, and you
may also have other rights which vary from state to state and country to
country. For intormation on our warranty claim procedure please email us at
www.Bostitchofifice.com or contact us at
1-800-343-9329.
CAUTION: The power supply cord is used as the main disconnect device,
ensure that the socket-outlet is located/ installed near the equipment and is
easily accessible.
WARNING: Electric Staplers are not designed to be used by children. This
equipment is not suitable for use in locations where children are likely to be
present.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>