JBC DR560 Heating Element Instruction Manual

June 3, 2024
JBC

DR560 Heating Element
Instruction Manual

JBC DR560 Heating Elementwww.jbctools.com
INSTRUCTION MANUAL

DR560 Heating Element

DRH Heating Element for DR560
This manual corresponds to the following reference:
DSV-DR

Packing list

The following items are included:
Heating element …………1 unit
Internal gasket ……………1 unit Ref. 0019208

Changing the heating element

For this operation, turn off the station or disconnect the tool and wait until the tool temperature drops to room temperature.
1. Removing
Loosen the deposit lid (a), remove the screw (b) and withdraw the heating element (c).JBC DR560 Heating Element fig 5 Recommended: Follow also the cleaning guidelines mentioned in the tool and station manuals.
2. Placing
Insert the new heating element (a), tighten the screw (b) and then the deposit lid (c).
JBC DR560 Heating Element fig 4 Important: Make sure the  internal gasket is inserted intothe glass solder collector. JBC DR560 Heating Element fig 3 For a proper connection, it is essential to insert the cartridge so that it aligns with the mark ****.JBC DR560 Heating Element fig 2

Compatibility

The DRH also works with the previous desoldering iron version DR5600 (Ref. 5600010). In this case, you must take off the washer with a pliers.JBC DR560
Heating Element fig 1

Specifications

DRH Heating Element for DR560
Ref.: DSV-DR

– Total Net Weight: 2 26 g / 0.057 lb
– Package Dimension/Weight: 1 (L x W x H) 5 x 1 127 x 31 x 31 mm / 35 g 5 x

1.22 x 1.22 in / 0.077 lb

Complies with CE standards ESD Safe

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Get 1 extra year JBC warranty by registering here:https://www.jbctools.com/productregistration/ within 30 days of purchase. This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

 www.jbctools.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals