little tikes 173059M Ladybird Cozy Coupe Instruction Manual

: October 30, 2023
: Little Tikes

Table of Contents

little tikes 173059M Ladybird Cozy Coupe
Product Information
612060M, #612060MX1, #614798P, #615795M, #621390M, #627286M, #630750M8X1,
630750MX1, #630750MP, #641954M, #641954MX1, #641961M, #641961MX1, and
644948M. The product requires adult assembly which takes approximately 50
Product Usage Instructions
Product Important Information
Before You Start
TOOLS
PARTS
INSTALLATION INSTRUCTIONS
LAST STEP
Scan
Documents / Resources

little tikes 173059M Ladybird Cozy Coupe

Thank you for choosing the Little Tikes© Cozy Coupe®. We strive to provide a durable, easy-to-assemble toy thats made to last, giving your child years of imaginative, engaging fun!

Product Information

The product is a Little Tikes Coupe car for children aged 1 1/2 – 5 years. The product code numbers are #173059M, #173059MX1, #484513, #485367, #486180,

612060M, #612060MX1, #614798P, #615795M, #621390M, #627286M, #630750M8X1,

630750MX1, #630750MP, #641954M, #641954MX1, #641961M, #641961MX1, and

644948M. The product requires adult assembly which takes approximately 50

minutes.

The product comes with a warning to store it in a warmer and protected place as cold plastic materials may lose resilience and become brittle and crack upon impact. The product should be disassembled and disposed of in a manner that no hazardous conditions such as small parts and sharp edges exist at the time of disposal.

Product Usage Instructions

Before assembly, make sure that all parts are present as listed in the hardware guide. Some packages of hardware may have extra pieces.
Insert two tail lights (part N) into the Coupe body and push them in.
Insert the gas cap (part H) into its place.
Secure Eye base (part G1) using four 1 inch screws. Snap on Eye front (part G2) and Eyes (part G3) and secure them using two 1 inch screws each.
Insert horn button (part S2) and bellows (part S1) into horn collar (part S3) and snap it into the center of the steering wheel (part Q).
To install the steering wheel, squeeze steering clip (part T) into steering wheel (part Q) and make sure the clip snaps into the middle hole on each side of the steering column. Insert steering wheel through the hole in the dashboard and through the steering O ring (part P).

For any queries or assistance, customers can contact Little Tikes customer service team at 1-800-321-0183.

Product Important Information

Really important information you should know!

Read through all the instructions first.
Clear a flat surface to lay out all the materials so everything is close at hand.
You will need a Phillips head screwdriver (power driver, recommended, not included) hammer and safety glasses (not included) to assemble the Cozy Coupe®.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
Be sure to locate your decals and set aside. Decals are easier to apply when the part is laying flat, so you may want to apply the decals before assembly.
The parts are listed below – each part is identified with a letter in RED for easy reference.
Illustrations are for reference only. Styles may vary from actual contents.
If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.

WARNINGS

Adult Assembly Required
Keep these instructions for future reference.
Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.
Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways, or inclines.
Shoes must be worn at all times.
Only one rider at a time.
Maximum weight limit: 50 lbs. (23 Kg)
This product is intended for use by children ages over 1 1/2 – 5 years.
Adult supervision required. Do not leave children unattended.
This product is intended for outdoor domestic family use only.
Protect your eyes. Always wear safety glasses when using a hammer.
When temperatures fall below 0°F/-18°C, outdoor use of this product is not recommended. In extreme cold, plastic materials lose resilience and may become brittle and crack upon impact. Store product in a warmer, protected place.

DISPOSAL

Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time equipment is discarded.

Before You Start

A Few Things Before You Start!

BEFORE you begin assembly, make sure you have all the parts listed below.
Some packages of hardware may have extras pieces.

Questions? We’re here to help.

Little Tikes customer service team at 1-800- 321-0183.

TOOLS

Hardware Guide

PARTS

INSTALLATION INSTRUCTIONS

Ready…let’s get started…with the tail lights!

Cap it!

Have to see where I’m going!

Secure Eye base (part G1) using (4) 1” (2,54cm) screws.
Snap on Eye front (part G2).
Snap on Eyes (part G3).
Secure using (2) 1″ (2,54cm) screws.

Let’s get the horn working

Warning: Before installing steering wheel, apply decals 1 & 2 to dashboard.

Steering wheel…in a Click

Squeeze steering clip (part T) into steering wheel (part Q).
Steering clip should snap into MIDDLE hole on each side of the steering column.
Insert steering wheel through hole in dashboard AND through the steering O ring (part P).
Make sure the steering clip snaps past the O ring.

Warning: If your steering wheel is loose or not staying in place; check to be sure the steering clip has completely snapped past the O-ring.

Choose your lock!

Roof and pillars match up

_ BEFORE YOU START: _match roof pillars marked “L & R” to the correct side of roof also marked “L & R”.

FRONT pillars…Lock the door in place!

REAR pillars… insert, pull back, turn!

BEFORE YOU START: match roof pillars marked “L & R” to the correct side of roof also marked “L & R”.

Hook the ROUNDED END of the REAR roof pillar (part F1) into the roof (part D) and push down.
Pull the REAR roof pillar, toward you to fully insert the pillar into the roof.
Turn the roof pillar around. The Little Tikes logo should be facing outward.
Repeat steps for the roof pillar – rear LEFT (part F2).

Lets put it all together!

Rear pillars- get attached

REAR wheels…give it a good hit!

Warning: Do not hammer on surfaces or items you don’t want to break, mark or dent.

REAR wheels…get in the groove

Slide onto rear axle (1) hubcap (M), (1) wheel (K), and (1) washer (BB).

REAR wheels…last step

Flip the coupe on its side.
Place a (1) top hat (AA) and the top hat tool over the OPEN end of the axle.
Hammer the top hat onto axle.

Warning: Do not hammer on surfaces or items you don’t want to break, mark or dent.

FRONT wheels…check your axles

Slide onto LEFT front axle (L) (1) washer (BB), (1) wheel (K) and (1) hubcap (M).

FRONT wheels…rolling along!

IMPORTANT: Check axle positions – roll the Cozy Coupe forward – HUBCAPS SHOULD FACING OUTWARD.

Axle caps and snaps!

Key & Ignition

Insert Ignition Base (part O1) LEFT roof pillar (part E2).
Hammer ignition base (part O1 ) into Coupe body.
Insert Key (part O2) into Ignition base.

LAST STEP

LAST STEP…let’s finish with the decals

Decals must be applied to a clean, dry surface. Wipe clean with a dry rag before application.
Remove air from under decals by applying pressure to the decals starting from the center, and work towards edges. NOTE: If decals bubble, prick with a pin to remove the air.

Floorboard needs buttons!

STOP: For parent controlled push rides, install the floorboard.

Line up openings in floorboard (part V) to floorboard buttons.
Once buttons are inserted into floorboard, push down to secure in place.

Scan

youtube

Documents / Resources

| little tikes 173059M Ladybird Cozy Coupe [pdf] Instruction Manual
173059M, 173059MX1, 484513, 485367, 486180, 612060M, 612060MX1, 614798P, 615795M, 621390M, 627286M, 630750M8X1, 630750MX1, 630750MP, 641954M, 641954MX1, 641961M, 641961MX1, 644948M, 173059M Ladybird Cozy Coupe, Ladybird Cozy Coupe, Cozy Coupe
---|---