V I V O STAND-PDMA Acrylic Podium Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O STAND-PDMA Acrylic Podium
**
WARNING!**
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Base
|
B (x1)
Front Wall
---|---
C (x1)
Top
|
D (x2)
Side Wall
E (x1)
Support
|
F (x1)
Rubber Pads
S-A (x18)
M3x16mm Screw
|
T-A (x1)
Philips Screwdriver
| DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
---|---
ASSEMBLY STEPS
STEP 1
Inspect Base (A) and locate the side with the smaller hole openings. This is the top. Connect the Support (E) to the top of Base (A) in the middle two holes using M3x16mm Screws (S-A) and Phillips Screwdriver (T-A). Do not fully tighten screws.
STEP 2
Remove Rubber Pads (F) from adhesive backing and apply to bottom side of Base (A). This is opposite the side that Support (E) was installed on.
STEP 3
Connect Side Walls (D) to Front Wall (B) using M3x16mm Screws
(S-A) and Phillips Screwdriver (T-A). Do not fully tighten screws.
NOTE: Make sure the flat side of Side Walls (D) are on bottom, and
the slanted sides are on top
STEP 4
Connect main structure assembly to Base (A) using M3x16mm Screws (S-A) and Phillips Screwdriver (T-A). Do not fully tighten screws.
STEP 5
Assemble Top (C) to assembly using M3x16mm Screws (S-A) and Phillips Screwdriver (T-A). Fully tighten all of the previously installed screws
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
SKU: STAND-PDMA
| Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product. Instruction
Manual
https://vivo-us.com/products/stand-pdma
---|---
Customer Support
GET IN TOUCH | Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303| AVG. RESOLUTION
TIME (within office hrs): 5M 4S
---|---
www.vivo-us.com
Chat live with an agent| AVG. RESOLUTION TIME (within office hrs): < 15 M
[email protected]| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Acrylic Podium – VIVO - desk solutions, screen mounting, and more