VEVOR RB-0200 Collapsible Rain Barrel Water Storage Tank User Manual
- October 30, 2023
- VEVOR
Table of Contents
WATER STORAGE TANK
USER MANUAL
MODEL:RB-0200/RB-0380
RB-0200 Collapsible Rain Barrel Water Storage Tank
We continue to be committed to offering tools at competitive prices. “Save
Half”, “Half Price”, or any other similar expressions used by us only
represent an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and do not necessarily mean to cover
all categories of tools offered by us. You are kindly reminded to verify
carefully when placing an order with us if you are saving half in comparison
with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
NOTES
- Place the fully installed barrel under the desired water source, such as a downspout. Water intake is through the filtered hole on the top of the barrel. The top of the barrel can also be unzipped for water intake or removal in bulk.
- The water barrel may not take form and be fully stable until some water is filled into the container. It is recommended to place the barrel in your desired location after installation and prefill some water into the container.
- All joints have been installed in advance. If there is water leakage, please check and tighten the joints.
MODEL AND PARAMETERS
| Model | RB-0200 | RB-0380 |
|---|---|---|
| Capacity | 53Gallons | 100Gallons |
| Material | PVC | PVC |
| Ambient temperature | -30℃～+70℃ | -30℃～+70℃ |
| Color | Black | Black |
| Product Size | Φ60*74cm | Φ70*103cm |
TRUCTURE DIAGRAM
- Top zipper
- Bottom outlet(3/4″)
- Top filter hole
- Overfall gap
- Scale
- Central outlet
- Supporting foot
COMPONENTS
| No. | PART | NAME | QTY |
|---|---|---|---|
| 1 | Rain barrel | 1 | |
| 2 | Lotus base | 6 | |
| 3 | Pillar | 6 | |
| 4 | Patch | 2 | |
| 5 | Planting label | 25 | |
| 6 | User manual | 1 |
USE
- After getting the product, unroll the rain barrel (Zipper/filter hole side is the top). Keeping the outlet valve closed, fill in the liquid from the top.
- Install 6 supporting foot strips and start to use.
MAINTAIN AND STORAGE
- Please use mild detergent and water for cleaning.
- Don’t scrub with hard objects like brushes.
- Dry before storage.Do not store in a dark, damp place.
- Clean the debris at the filter port in time to avoid clogging.
- If the barrel body is damaged, it can be repaired with the attached patch (Please bring your own glue).
- If the joint is leaking, tighten the joint or wrap waterproof tape(Provide for yourself) on the thread of the joint before installing it(As shown below).
Note: If you install and remove the connector yourself and the switch is
not vertical, try increasing the number of winding laps of waterproof tape.
Manufacturer: Haining Tak Techtextil Industries Co., Ltd.
ADD: No. 2, Qingyuan Road, Xieqiao Town, Haining City, Jiaxing City,
Zhejiang Province, China
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
EUREP GmbH
Unterlettenweg 1 a. 85051 Ingolstadt, Germany
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH =
Made in China
Support and E-Warranty Certificate
https://www.vevor.com/support