VEVOR 18150FTLB Torque Wrench User Manual
- October 30, 2023
- VEVOR
Table of Contents
VEVOR 18150FTLB Torque Wrench
Product Information: Torque Wrench
The Torque Wrench is a precision tool used for tightening nuts and bolts to a specific torque value. It is available in four different models with SKU1, SKU2, SKU3, and SKU4. The torque range for these models is 10-150ft.lb, 25-250ft.lb, 20-200in.lb, and 10-80ft.lb respectively. The Torque Wrench has 72 teeth and a drive size of 1/2, 1/4, or 3/8 depending on the model. It comes with a G.W. of 2.2kg, 2.72kg, 0.83kg, or 2.0kg depending on the model and can be used in both clockwise and anti-clockwise directions.
Product Usage Instructions
Important Safety Instructions
Please read the operation manual carefully before you start to operate the
torque wrench. contact the manufacturer for any questions. so as to avoid
safety accidents and damage to the torque wrench.
- In order to maintain good accuracy, it is recommended to recalibrate approximately once a year or each 5000 times
- Make sure the torque wrench is set correctly before use (the torque is set on the minimum scale for shipment).
- Please go professional inspection department to perform regularly inspection for function and accuracy , in order to avoid injury accidents or damage the torque wrench, the individual must not disassemble the assembly.
- After using the wrench, adjust to the minimum torque; If you do not use the torque wrench for a long time, rub on the anti-rust oil and store in a dry place.
- Do not using torque wrench as a hammer, or using pliers to clip wrench,or using wrench in the water.
- This product is intended to apply a specific torque force to a fastener such as a nut or bolt. Do not use this product to loosen blots, screws or the other fastener, since it might damage the ratchet and the calibrated settings.
- To prevent damage to the product, stop applying pressure when the “click” sound is heard. To remind that the “click” sound is acoustically weaker with lower torque settings
- Use only within rated torques range.Read the operation manual carefully before using the Torque Wrench.
- Recalibrate the torque wrench approximately once a year or each 5000 times to maintain accuracy.
- Make sure the torque wrench is set correctly before use.
- Do not disassemble the assembly. Have it inspected regularly by a professional inspection department to avoid injury accidents or damage to the torque wrench.
- After using the wrench, adjust to the minimum torque and rub anti-rust oil before storing in a dry place.
- Do not use the Torque Wrench as a hammer or clip it with pliers or use it in water.
- This product is intended to apply a specific torque force to a fastener such as a nut or bolt. Do not use this product to loosen bolts, screws, or other fasteners as it might damage the ratchet and the calibrated settings.
- Stop applying pressure when the click sound is heard to prevent damage to the product. Note that the click sound is acoustically weaker with lower torque settings.
- Use only within the rated torque range.
Selection Guide
Select the appropriate type of Torque Wrench and sleeve according to the
torque value required by the bolt or nut to be tightened.
How to set a torque value
To set a torque value:
- Rotate the handle until the desired torque value aligns with the indicator line.
- Place the socket onto the nut or bolt and tighten until the click sound is heard.
- Stop applying pressure once the click sound is heard to prevent damage to the product.
We continue to be committed to offering tools at competitive prices. “Save Half”, “Half Price”, or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are saving half in comparison with the top major brands.
Parameter table
Torque Wrench- Parameter table
Item| Description| SKU1| SKU2| SKU3| SKU4
1| Model| 18150FTLB| 18250FTLB| 16200INLB| 17080FTLB
2| Drive Size| 1/2″| 1/2″| 1/4″| 3/8″
3
| Number of
Teeth
| ****
72
| ****
72
| ****
72
| ****
72
4
| Torque
Range (ft.lb)
| ****
10-150ft.lb
| ****
25-250ft.lb
| ****
20-200in.lb
| ****
10-80ft.lb
5
| Torque
Range (n.m)
| ****
14-204n.m
| ****
34-340n.m
| ****
3-23n.m
| ****
14-110n.m
6
| Packaging
Size
| ****
555×125×75mm
| ****
615×125×75 mm
| ****
275×115×60mm
| ****
555×125×75mm
7| G.W.| 2.2kg| 2.72kg| 0.83kg| 2.0kg
8| Unit| ft-lb / n.m| ft-lb/n.m| in-lb/n.m| ft-lb/n.m
9
| Torque precision
(clockwise)
| ****
±3%
| ****
±3%
| ****
±3%
| ****
±3%
Selection Guide
Select the appropriate type of torque wrench and sleeve according to the torque value required by the bolt or nut to be tightened
How to set a torque value
Pull back the locker to unlock the supplementary graduation.
Turn the Supplementary Graduation to set a torque(Combination of values on the Main and supplementary graduations.
- Turn Supplementary Graduation until 60N.m on Main Graduation close to Graduation Datum Line. Now, torque is set at 60N.m。
- Turn clockwise until 6 on Supplementary graduati on is aligned with Center Line.Now Torque is set at 66N.m
- Apply the socket on to a bolt head or nut.
- Turn the torque wrench clockwise to fasten the bolt.
- Stop pulling the wrench when you hear a “Click”, this means it’s already at the torque value which you set.
Torque conversion table
Storage
This product is a precision instrument and should be stored with care using provided storage box. Avoid any vibrations and shocks Set the toque to the lowest level before storage
-
EC Importer: WAITCHX
-
Address : 250 bis boulevard Saint-Germain 75007 Paris
-
UK Importer: FREE MOOD LTD
-
Address : 2 Holywell Lane, London, England, EC2A 3ET
-
Manufacturer ：Hangzhou Hao Gong Tools Co., LTD.
-
Address ：Lihe South R.d. Yiqiao Town Xiaoshan Distrct Hangzhou City Zhejiang Province PRC
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
For any product questions or technical support, please contact
CustomerService@vevor.com. Please read all
manual instructions carefully before operating the Torque Wrench. VEVOR
reserves a clear interpretation of our user manual. The appearance of the
product shall be subject to the product you received. Please forgive us that
we won’t inform you again if there are any technology or software updates on
our product.
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>