V I V O MOUNT-M-MM070A Mechanical Spring Fireplace TV Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O MOUNT-M-MM070A Mechanical Spring Fireplace TV Mount
The Mechanical Spring Fireplace TV Mount is designed to securely mount your TV over a fireplace. The mount comes with all the necessary hardware for installation and can be mounted on wood, brick, and concrete walls.
Product Usage Instructions
- Verify that your wall construction can support the mount. Use wood studs to mount and avoid installing into drywall alone. If unsure, contact the manufacturer.
- Assemble Mount (A) to Wall Plate (B) using M8x12mm Screws (S-A) and 5mm Allen Wrench (T-A).
- If mounting on a wood wall, use Stencil (C) to mark mounting holes on the wall where a stud is located, and drill 55mm (2.2) deep holes using 4.5mm (3/16) bit. If mounting on a concrete/brick wall, drill holes at least 60mm (2.4) deep into marked locations and press Concrete Anchors (W-B) into holes. Mount Wall Plate (B) to the wall using ST6.3x55mm Screws (W-A) and M6 Washers (W-C).
- Install Wall Plate Covers (H) to Wall Plate (B).
- Secure TV Plate (D) to Mount (A) using M8 Plastic Washers (S-B), M8 Washers (S-C), and M8 Nuts (S-D). Tighten M8 Nuts (S-D) using Wrench (T-D).
- Assemble TV Plate Cover (I) to TV Plate (D) using ST3x6mm Screws (S-E) and a Phillips screwdriver.
- Attach VESA Brackets (E) to back of the TV using screws (M-A through M-D) and M8 Washers (M-E). If screws are too long, spacers (M-F, M-G) may be required.
- Assemble Handle Support (F) to VESA Brackets (E) using M6x20mm Screws (S-G) and M6 Washers (S-H). Mount Handle (G) to Handle Support (F) using M6x10mm Screws (S-F) and M6 Washers (S-H). Tighten all screws using 5mm Allen Wrench (T-A).
- Do not exceed weight capacity. Failure to do so may result in serious injury.
SKU : MOUNT-M-MM070A
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. Instruction Manual https://vivo-
us.com/products/mount-m-mm070a
GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CS
- help@vivo-us.com
- www.vivo-us.com
- 309-278-5303
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
PACKAGE CONTENTS
NOTE : NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD
STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure,
please contact us at vivo-us.com, email at help@vivo-us.com, or call us at
309-278-5303.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Assemble Mount (A) to Wall Plate (B) using M8x12mm Screws (S-A) and 5mm Allen
Wrench (T-A).
STEP 2
Measure the required mounting height using the chart below. Ensure the front
edge of the mantel does not exceed 110°F (43°C).
STEP 3 (Option A)
Wood Wall Installation
Use Stencil (C) to mark mounting holes on the wall where a stud is located,
and drill 55mm (2.2”) deep holes using 4.5mm (3/16”) bit. Use of a stud finder
and level is recommended. Mount Wall Plate (B) to the wall using ST6.3x55mm
Screws (W-A) and M6 Washers (W-C). Do not use Concrete Anchors (W-B) for wood
stud or drywall installation.
(Option B)
Concrete/Brick Wall Installation
Use Stencil (C) to mark mounting holes on the wall. Using a 10mm (3/8”) drill
bit, drill holes at least 60mm (2.4”) deep into marked locations. Use of a
level is recommended. Press Concrete Anchors (W-B) into holes. Mount Wall
Plate (B) to the wall using ST6.3x55mm Screws (W-A) and M6 Washers
(W-C).
STEP 4
Install Wall Plate Covers (H) to Wall Plate (B).
STEP 5
Secure TV Plate (D) to Mount (A) using M8 Plastic Washers (S-B), M8 Washers
(S-C), and M8 Nuts (S-D). Tighten M8 Nuts (S-D) using Wrench
(T-D).
STEP 6
Assemble TV Plate Cover (I) to TV Plate (D) using ST3x6mm Screws (S-E) and a
Phillips screwdriver.
STEP 7
Attach VESA Brackets (E) to the back of the TV using screws (M-A through M-D)
and M8 Washers (M-E). If screws are too long, spacers (M-F, M-G) may be
required
STEP 8
Assemble Handle Support (F) to VESA Brackets (E) using M6x20mm Screws (S-G)
and M6 Washers (S-H). Mount Handle (G) to Handle Support (F) using M6x10mm
Screws (S-F) and M6 Washers (S-H). Tighten all screws using 5mm Allen Wrench
(T-A).
STEP 9
Level Mount (A) and insert 5mm Allen Wrench (T-A) into the of the end to
lock it in place. Remove Nuts (E1) from the back of VESA Brackets (E) using
Wrench (T-D) and open the latches. Hang VESA Brackets (E) over TV Plate (D)
and secure the latches using Nuts (E1) and Wrench (T-D).
STEP 10
Assemble Socket (T-C) to Ratchet (T-B). Insert Socket (T-C) into the
adjustment screw on the front of Mount (A). Tighten the adjustment screw using
Ratchet (T-B) to set the indicator to the correct position based on the weight
of the TV.
STEP 11
Organize cables using the cable clips located under Mount (A). Remove 5mm
Allen Wrench (T-A) from Mount (A) and adjust the TV as
desired
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 02/13/2023
REV2
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M Chat live with an agent!
- help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Mechanical Spring Fireplace TV Mount for 43" to 70" TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>