V I V O MOUNT-E-FD70 Electric Flip Down Ceiling Mount Instruction Manual

October 30, 2023
V I V O

Black Electric Flip Down Ceiling TV Mount
SKU: MOUNT-E-FD70
Instruction ManualV I V O MOUNT E FD70 Electric Flip Down Ceiling Mount
-

MOUNT-E-FD70 Electric Flip Down Ceiling Mount

ASSEMBLY VIDEO AVAILABLE:
Follow along step-by-step with our video walk through by scanning the QR code with your mobile device or by following the product link: vivo- us.com/products/mount-e-fd70

https://vivo-us.com/products/mount-e-fd70

help@vivo-us.com
309-278-5303
www.vivo-us.com

Contact Us First!
DO NOT RETURN ITEM
Our friendly product support team is here to help!
PERSONABLE CUSTOMER SUPPORT
7AM – 7PM
Monday-Friday

| Give us a Call: 309-278-5303
---|---
| Chat Us: www.vivo-us.com
| Email Us: help@vivo-us.com

We’re Here for You!
Our customer-minded support team is here for YOU, Monday-Friday 7am-7pm CST.
We offer immediate assistance with rapid response times from customer service agents and product techncians to help you every step of the way!
Missing a Part?
If any parts are received damaged / defective OR you are missing a part, please reach out to us within 30 days of product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully functioning product

PRE-ASSEMBLY | BEFORE YOU BEGIN
** If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call us at 309-278-5303.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
Product Warranty
For the most up to date details on your product’s warranty, please visit the product’s listing on our website or reach out to customer support.
vivo-us.com/products/mount-e-fd70
Returns | Product Didn’t Work Out?**
We offer a hassle-free 30 day return on all products. Contact customer support at 309-278-5303 or help@vivo-us.com. Please note: For items ordered in error or no longer needed, the return shipping charges will be at the buyer’s expense.

TOOLS NEEDED:

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount -
icon8

PACKAGE CONTENTS

Please consult the parts list below and ensure you have everything you need to assemble your product. If parts are missing or damaged, please contact us.

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - fig
1

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

ASSEMBLY STEPS

STEP 1: Installing the Mount

OPTION A: Wood Ceiling
Using Ceiling Template (C), mark exact location of mounting holes. Drill pilot holes 2.2” deep using a 4.5mm drill bit. Insert two ST6.3x55mm Screws (W-A), leaving a 5mm gap from ceiling.
Hang Mount (A) so that the screws fit into the keyhole openings. Slide Mount (A) backward, then secure using additional ST6.3x55mm Screws (W-A) with Washers (W-C).V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - Wood
Ceiling

NOTE: If mounting to a wood beam ceiling, ensure the front and back holes are used for the main support if mount is in line with the beam. If perpendicular to the beam, use keyhole openings for the main support. Do NOT use included Concrete Anchors (W-B) for wood or drywall.
OPTION B: Concrete Ceiling
Using Ceiling Template (C), mark exact location of mounting holes. Drill pilot holes 2.4” deep, using a 10mm drill bit. Insert six Anchors (W-B), then tighten two ST6.3x55mm Screws (W-A), leaving a 5mm gap from ceiling. Hang Mount (A) so that the screws fit into the keyhole openings.
Slide Mount (A) backward, then secure using additional ST6.3x55mm Screws (W-A) with Washers (W-C). Tighten all screws.V I V O MOUNT E FD70 Electric Flip
Down Ceiling Mount - Concrete CeilingV I V O MOUNT E FD70 Electric Flip Down Ceiling Mount -
Concrete Anchor

STEP 2: Assembling VESA Components
Assemble Bracket Rails (F) to Center Plate (C) using M6x25mm Screws (S-B), M6 Washers (S-C) and M6 Nuts (S-D). While holding M6 Nuts (S-D) with a wrench, use a Phillips screwdriver to tighten M6x25mm Screws (S-B). Slide VESA Brackets (E) onto Bracket Rails (F) and secure using M4x8m Screws (S-E) and 3mm Allen Wrench (T-A).![V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount

  • Bracket Rails](https://manuals.plus/wp- content/uploads/2023/06/V-I-V-O-MOUNT-E-FD70-Electric-Flip-Down-Ceiling-Mount- Bracket-Rails.jpg)

Adjust VESA Brackets (E) spacing to match TV mounting holes, and lock in place using Set Screw (S-A) and 3mm Allen Wrench (T-A). Remove the four pre- installed screws from Center Plate (B) and loosen the center screw until 5mm of thread is exposed.

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - fig
2

STEP 3: Mounting VESA Assembly
OPTION A: Flat Back TV
Align the VESA bracket assembly with the mounting holes in the back of the TV screen. Install assembly to TV using appropriate screws (M-A, M-B) and Square Washers (M-F) according to your screen’s requirements.V I V O MOUNT E FD70
Electric Flip Down Ceiling Mount - Flat Back TV

OPTION B: Curved/Recessed Back TV
Align the VESA bracket assembly with the mounting holes in the back of the TV screen. Install assembly to TV using appropriate screws (M-C, M-D, M-E), Square Washers (M-F) and Spacers (M-G, M-H) according to your screen’s requirements.

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - Flat Back
TV1

STEP 4: Attach Leveling Knobs (Optional)
Attach Leveling Knobs (J) to the lower two Set Screws (S-A) as shown. This will ensure the TV is perfectly level with the ceiling when raised.V I V O
MOUNT E FD70 Electric Flip Down Ceiling Mount - ceiling when
raised

STEP 5: Place TV on Mount
Place the TV with VESA bracket assembly on Mount (A) by inserting the center screw on Center Plate (B) into the keyhole on Mount (A) at the desired height. Secure using previously removed screws (STEP 2) and tighten with a Phillips screwdriver. Clearance between the ceiling and top edge of TV should be no less than 15mm when TV is in the fully lowered position.

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - Place TV on
Mount

STEP 6: Manage Cables
Run cables along edge of Mount (A). Allow slack in cables for arm movement. Place Decorative Covers (D) over cables and snap into place. Next, using Cable Ties (I) to fasten cables to the side of the arm.
NOTE: Keep cables clear from inside of arm to avoid damage due to pinching.V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount - fig
4

STEP 7: Connect AC Adapter
Plug AC Adapter (G) into Mount (A), and connect to AC outlet. Follow Remote (H) instructions for operation.
NOTE: Plugging power supply into AC outlet prior to the mount may cause a large spark when connecting to the mount.V I V O MOUNT E FD70 Electric Flip
Down Ceiling Mount - fig 5

CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
We offer a wide array of home & office products to fit your needs. From height adjustable desks to monitor mounts to keyboard trays and more!

SPEAKER MOUNTS & STANDS
Whether you’re mounting a soundbar or surround sound system, we’ve got a mounting solution to fit
your needs| HEIGHT ADJUSTABLE DESKS
We offer electric & manual crank standing desks, corner frames, desk & top combos, and more!| MONITOR MOUNTS
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a mounting solution for your setup.
---|---|---
| |
| | V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount -
qr3

[https://vivo-us.com/collections/](https://vivo-us.com/collections/speaker-mounts-and-stands)


[speaker-mounts-and-stands](https://vivo-us.com/collections/speaker-mounts-and-stands)

|

[https://vivo-us.com/](https://vivo-us.com/collections/standing-desks)


[collections/standing-desks](https://vivo-us.com/collections/standing-desks)

|

[https://vivo-us.com/](https://vivo-us.com/collections/monitor-mounts)


[collections/monitor-mounts](https://vivo-us.com/collections/monitor-mounts)  

WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of creative and innovative indivuduals working together to offer high quality, affordable ergonomic solutions. We think and work outside of the box to serve you, our customer, to the best of our abilitiy.

V I V O MOUNT E FD70 Electric Flip Down Ceiling Mount -
AssistanceNeed Assistance?
We Would Love to Help!
Personable Customer Support | Mon-Fri 7am-7pm
We offer immediate assistance with rapid response times from customer service agents and product techncians to help you every step of the way!

Call Us: 309-278-5303
Average Resolution Time: 5m 4s
Chat Us: www.vivo-us.com
Average Resolution Time: < 15m
Email Us: help@vivo-us.com
Average Resolution Time: 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within <2hr
92% within < 3hr

LOVE YOUR NEW VIVO SETUP?
Ready to share that new amazing setup? Want to brag about that amazing new ergonomic solution?
Tag us in your photo! FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
LAST UPDATED: 06/28/2022
REV1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals