V I V O DESK-V000KL Desk Converter Instruction Manual

V I V O DESK-V000KL Desk Converter

Product Information

The Black Corner Desk Riser (SKU: DESK-V000KL) is a desk accessory designed to increase workspace and promote a healthy work environment. The desk riser comes with a keyboard tray, cable clips, foam pads, and foot pads. The desk riser has a weight capacity of 33 lbs (15kg), and the keyboard tray weighs 4.4 lbs (2kg). The desk riser is not suitable for children under 3 years of age.

Product Usage Instructions

1. Unpack the package contents and ensure all parts are present.
2. Separate the Sleeve Nut with Screw (S-A) into Sleeve Nut (S-A1) and Screw (S-A2).
3. Apply Foam Pads (D) to the underside of the Keyboard Tray (B). Press Sleeve Nuts (S-A1) into the holes on top of the Keyboard Tray (B).
4. Press Foot Pads (E) into the holes in the base of the Desk (A). Cut the large plastic ties on the bottom of the Desk (A).
5. Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop.
6. Place Keyboard Tray (B) on metal brackets on Desk (A). Secure the keyboard tray to brackets using Screws (S-A2) and a Phillips screwdriver.
7. Apply Cable Clips (C) to the underside of the desk assembly.
8. If installing a grommet compatible monitor mount, remove the plastic cap from the rear center of the desktop. Install the mount to the open hole according to the mount’s directions.
9. Follow the cable routing instructions to avoid the potential to pinch cables. Leave enough slack in the cable to allow for full range of vertical motion (15 / 38 cm). Raise the desktop slowly to keep items stable.

It is important not to exceed the weight capacity of the desk riser. Failure to do so may result in serious injury. Keep the monitor and laptop base fully on the desktop. Failure to follow usage instructions may result in property damage and/or personal injury. If any parts are received damaged or defective, please contact the manufacturer for replacement parts.

SKU: DESK-V000KL

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products /desk-v000kl
GET IN TOUCH | Monday-Friday from 7:00 am-7:00 pm CS
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use

PACKAGE CONTENTS

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED

ASSEMBLY STEPS

1. STEP 1
   Separate the Sleeve Nut with Screw (S-A) into Sleeve Nut (S-A1) and Screw (S-A2).

2. STEP 2
   Apply Pads (D) to the underside of the Keyboard Tray (B). Press Sleeve Nuts (S-A1) into holes on top of the Keyboard Tray (B).

3. STEP 3
   Press Foot Pads (E) into holes in base of Desk (A). Cut the large plastic ties on the bottom of Desk (A).
   CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position.

4. STEP 4
   Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop
   Place Keyboard Tray (B) on metal brackets on Desk (A). Secure the keyboard tray to brackets using Screws (S-A2) and a Phillips screwdriver.
   Apply Cable Clips (C) to the underside of desk assembly

Grommet Mount

If installing a grommet compatible monitor mount, remove the plastic cap from the rear center of the desktop. Install the mount to the open hole according to the mount’s directions

CAUTION!

• Keep the monitor and laptop base fully on the desktop.
• Follow the cable routing instructions to avoid the potential to pinch cables.
• Leave enough slack in the cable to allow for full range of vertical motion (15” / 38 cm).
• Raise the desktop slowly to keep items stable.

Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
help@vivo-us.com.

AVG. RESPONSE TIME (within office hrs): 1HR 8M

• 23% within < 15m
• 38% within < 30m
• 61% within < 1hr
• 83% within < 2hr
• 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• 38" Corner Standing Desk Converter – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>