V I V O DESK-M43TB Black 43 x 24 Inch Manual Height Adjustable Desk Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Black 43” x 24” Manual Height Adjustable Desk
Instruction Manual
DESK-M43TB Black 43 x 24 Inch Manual Height Adjustable Desk
SKU: DESK-M43TB
https://vivo-us.com/products/desk-m43tb
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/desk-m43tb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual and do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the wolksurface. Failure
to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Attach Side Brackets (B) to Lifting Columns (A) using M6x30mm Screws (S-D).
Stand up Lifting Columns (A) and insert Sync Rod (C) into the socket on each
column. Use Crank (G) to align columns if needed.
STEP 2
Assemble Upper Crossbar (D) to the top of the columns using the M5x60mm Screws
(S-C) and the Lower Crossbar (E) to the back using M6x12mm Screws (S-A).
Tighten all screws using the Allen Wrench (S-G).
STEP 3
Apply Silicone Pads (S-E) to the top of the assembled frame as shown.
STEP 4
Place Desktop (F) on top of assembled frame. Secure using the M6x35mm Screws
(S-B) with M6 Washers (S-E), and tighten with a Phillips screwdriver.
STEP 5
Insert Crank (G) into the hex socket of Lifting Column (A)
Figure 1: Turn the crank to raise or lower the desk.
Figure 2: Store the crank in the rear of the Side Bracket (B) as shown.
Figure 3: Turn the foot pads to adjust the desk level.
Figure 4: Use a bubble level to ensure the desk is sitting perfectly level.
CAUTION!
| | |
---|---|---|---
Do not exceed desk weight limit.| Keep area of vertical motion free of
obstacles.| Keep weight on desk balanced for correct operation and longer life
of components.| Leave enough slack in cables to allow for full range of
vertical motion.
Failure to follow these instructions may result in property damage and/or
personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S |
|---|
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 08/18/2022
REV1.1
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 43" x 24" Manual Height Adjustable Desk – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>