V I V O STAND-V101H Pneumatic Arm Single Monitor Desk Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
STAND-V101H Pneumatic Arm Single Monitor Desk Mount
Instruction Manual
STAND-V101H Pneumatic Arm Single Monitor Desk Mount
SKU: STAND-V101H
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product.
https://vivo-us.com/products/stand-v101h
GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
FOR VESA ADAPTER:
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
ASSEMBLY STEPS
STEP 1
Slide Base Cover (F) onto Pole (E).
STEP 2
Stick Rubber Pads (J) to the underside of Clamp Brace (C). (Skip to Step 3
Option B if grommet base option will be used)
STEP 3 (Option A)
Clamp Installation
Assemble Clamp (B) to Clamp Brace (C) using M6x8mm Screws (S-A) and tighten
with 4mm Allen Wrench (T-B). Thread Pole (E) onto Clamp Brace (C), and tighten
pre-installed set screws with 3mm Allen Wrench (T-A). Press Base Cover (F)
into place. Place assembly on the edge of the desk and tighten the hand bolt
to secure.
STEP 3 (Option B)
Grommet Base Installation
Thread Pole (E) onto Grommet Base (D), tighten pre-installed set screws with
3mm Allen Wrench (T-A), and press Base Cover (F) into place. Stick Rubber Pads
(J) to the underside of Grommet Base (D). Remove screw from end of Hand Bolt
(B1) on Clamp (B) and separate parts. Use Hand Bolt (B1) with Support Plate
(H) to secure base assembly to grommet hole in desk.
STEP 4
Slide Cable Clip (I) and Monitor Arm (A) onto Pole (E). Secure Monitor Arm (A)
using 6mm Allen Wrench (T-C).
STEP 5
OPTION A: Flat Back Monitor
For flat back monitors, install VESA Plate (G) to monitor using Screws (M-A)
or (M-C) and M5 Washers (M-E).
OPTION B: Curved Back Monitor
For curved back monitors, install VESA Plate (G) to monitor using Screws (M-B)
or (M-D), M5 Washers (M-E), and Spacers (M-F).
FOR VESA ADAPTER:
If your monitor has a 200×100 VESA hole pattern, install Adapter Plate (K) to VESA Plate (G) using M4x12mm Screws (S-C), M4 Nuts (S-D), and M5 Washers (S-E). Install Adapter Plate (A) to the monitor using Screws (M-A through M-D) and M5 Washers (M-E).
STEP 6
Slide VESA Plate (G) over bracket on Monitor Arm (A). Secure using Thumbscrew
(S-B).
STEP 7
Remove bottom cover from Monitor Arm (A) by sliding cover forward and off.
STEP 8
Run cables through bottom of Monitor Arm (A). Reattach cover.
STEP 9
Adjust tension in Monitor Arm (A) and angle of monitor using 6mm Allen Wrench
(T-C). Clockwise reduces tension, counterclockwise increases tension. The
tension should be just enough to hold your monitor in place without lifting
itself up.
STEP 10
Adjust monitor to desired position and store Allen Wrenches (T-A, T-B, T-C) in
Cable Clip (I) for future adjustments.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M 4S |
|---|
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-
us.com
LAST UPDATED: 08/18/2022
REV1
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Pneumatic Arm Single Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>