V I V O PP-RD-102B Dark Gray 102×70 Inch Cloth Room Divider Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O PP-RD-102B Dark Gray 102×70 Inch Cloth Room Divider
**
WARNING!**
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x6)
Upper Vertical
Support
|
B (x6)
Lower Vertical
Support
|
C (x4)
Foot
|
D (x6)
Crossbar
---|---|---|---
E (x6)
Connector Clip
|
F (x3)
Divider
|
G (x16)
End Cap
|
H (x8)
Brace
S-A (x16)
ST4x40mm Screw
|
S-B (x8)
M5x25mm Screw
|
S-C (x8)
M5 Nut
|
S-D (x12)
Small Insert
S-E (x4)
Large Insert
|
TOOLS NEEDED
- Phillips Screwdriver
ASSEMBLY STEPS
STEP 1
Press Small Inserts (S-D) into both ends of Crossbars (D). Press Large Inserts (S-E) into the bottoms of x4 Lower Vertical Supports (B).
STEP 2
Assemble Feet (C) to Lower Vertical Supports (B) with the installed Large Inserts (S-E) using ST4x40mm Screws (S-A) and a Phillips screwdriver.
STEP 3
Slide Upper Vertical Supports (A) onto Lower Vertical Supports (B).
STEP 4
Assemble Braces (H) to Feet (C) using M5x25mm Screws (S-B) and M5 Nuts (S-C). Secure x2 Crossbar (D) to x2 Lower Vertical Supports (B) using ST4x40mm Screw (S-A).
STEP 5
Assemble x2 Crossbars (D) to x2 Vertical Supports (A) using ST4x40mm Screw (S-A) and a Phillips screwdriver.
STEP 6
Slide x2 Dividers (F) onto the Crossbars (D).
STEP 7
Secure the other upright assemblies to Crossbars (D) using ST4x40mm Screws (S-A) and a Phillips screwdriver.
STEP 8
Assemble remaining Crossbars (D) and upright assemblies with Divider (F) using ST4x40mm Screws (S-A) and a Phillips screwdriver.
STEP 9
Secure Connector Clips (E) to Upper Vertical Supports (A) and Lower Vertical Supports (B), then assemble the panels together. Assemble End Caps (G) to Upper Vertical Supports (A), x2 Lower Vertical Supports (B)and Feet (C).
SKU: PP-RD-102B
| Scan the QR code with your mobile
device or follow the link for helpful videos and specifications related to
this product.
https://vivo-us.com/products/pp-rd-102b
---|---
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
GET IN TOUCH Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303 | AVG. RESOLUTION TIME (within office hrs): 5M |
|---|
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more