V I V O MOUNT-PC01 Adjustable Under Desk and Wall PC Mount Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

V I V O MOUNT-PC01 Adjustable Under Desk and Wall PC Mount
Product Information
Product Usage Instructions
Product Package Contents
Product Assembly Steps
PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V I V O MOUNT-PC01 Adjustable Under Desk and Wall PC Mount

Product Information

The Black Under Desk and Wall PC Mount (SKU: MOUNT-PC01) is a versatile mount designed to hold your PC tower either under your desk or on a wall. It includes all necessary hardware such as screws, anchors, and a 4mm Allen wrench for assembly. It can hold up to 22lbs (10kg) of weight and is made of durable materials to ensure a secure hold.

Dimensions: 10.5 x 3.5 x 9 inches
Weight: 2.8lbs
Color: Black

Product Usage Instructions

WARNING! Before installation, verify your wall construction. Do not install into drywall alone. Use wood studs tomount. If unsure, please contact us at vivo-us.com, email at help@vivo- us.com, or call us at 309-278-5303.

WARNING! This product contains small parts and is not suitable for children under 3 years. Adult supervision is required.

Product Package Contents

(x1) Mount (A)
(x12) Pad (B)
(x4) ST4.8x16mm Screw (M-A)
(x4) ST4.8x38mm Screw (M-B)
(x4) Concrete Anchor (M-C)
(x4) Washer (M-D)
(x1) 4mm Allen Wrench (T-A)

TOOLS NEEDED: Drill, Phillips screwdriver, level, pencil

Product Assembly Steps

Apply Pads (B) to top, bottom, and side of Mount (A) as shown.
OPTION A: Under Desk Installation
Secure Mount (A) to bottom of desk using ST4.8x16mm Screws (M-A) and Washers (M-D).
Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. The screws can be removed to adjust the side support bracket to one of two positions, a or b.
Loosen set screws for lower support using 4mm Allen wrench (T-A) and slide the support down. Place PC tower on Mount (A), slide bottom support up until Mount (A) is fit vertically to PC, and tighten set screws using 4mm Allen Wrench (T-A). Slide side bracket into place to hold PC, and tighten screws using a Phillips screwdriver.
OPTION B: Wood Wall Installation
Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. Loosen set screws for lower support using 5mm Allen Wrench (T-A) and slide the support down.
For solid wood wall, place Mount (A) against wall and mark drilling locations. Using a 1/8 (3.5mm) drill bit, drill holes 0.67 (15mm) deep. Insert two ST4.8x16mm Screws (M-A) into top holes, leaving a 3mm of thread exposed. Hang Mount (A) over screws and insert two more ST4.8x16mm Screws (M-A) into lower holes. Tighten screws with a Phillips screwdriver. If wall has a wood stud frame, use a stud finder to locate the stud, then place Mount (A) against wall and mark drilling locations for top and bottom holes on only one side of the mount. Using a 1/8 (3.5mm) drill bit, drill holes 1.2 (35mm) deep. Insert a ST4.8x38mm Screw (M-B) into top hole,
leaving 3mm of thread exposed. Hang Mount (A) over screw and insert another ST4.8x38mm Screw (M-B) into lower hole. Tighten screws with a Phillips screwdriver.
OPTION C: Concrete Wall Installation
For concrete wall installation, place Mount (A) against the wall and mark locations with a pencil. Drill 1.2 (35mm) deep holes at marked locations using a 1/4 (6mm) drill bit. Insert Concrete Anchors (M-C) into holes, and insert two ST4.8x38mm Screws (M-B) into top holes, leaving 3mm if thread exposed. Hang Mount (A) over two screws in the wall. Secure with two additional ST4.8x38mm Screws (M-B), and tighten screws with a Phillips screwdriver.

DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.

If you have any questions or need additional assistance, please contact us at help@vivo-us.com, visit our website at www.vivo- us.com, or chat live with an agent!

SKU: MOUNT-PC01

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

Instruction Manual
https://vivo-us.com/products/mount-pc01

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete If unsure, please contact us at vivo-us.com, email at help@vivo- us.com, or call us at 309-278-5303.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

TOOLS NEEDED

ASSEMBLY STEPS

Apply Pads (B) to top, bottom, and side of Mount (A) as shown.
OPTION A: Under Desk Installation
Secure Mount (A) to bottom of desk using ST4.8x16mm Screws (M-A) and Washers (M-D).
OPTION A: Under Desk Installation
Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. The screws can be removed to adjust the side support bracket to one of two positions, a or b.
OPTION A: Under Desk Installation
Loosen set screws for lower support using 4mm Allen wrench (T-A) and slide the support down. Place PC tower on Mount (A), slide bottom support up until Mount (A) is fit vertically to PC, and tighten set screws using 4mm Allen Wrench (T-A). Slide side bracket into place to hold PC, and tighten screws using a Phillips screwdriver.
OPTION B: Wood Wall Installation
Loosen two screws on top of Mount (A) (one on each side) and slide side support bracket out to maximum width. Loosen set screws for lower support using 5mm Allen Wrench (T-A) and slide the support down.
OPTION B: Wood Wall Installation
For solid wood wall, place Mount (A) against wall and mark drilling locations. Using a 1/8” (3.5mm) drill bit, drill holes 0.67” (15mm) deep. Insert two ST4.8x16mm Screws (M-A) into top holes, leaving a 3mm of thread exposed. Hang Mount (A) over screws and insert two more ST4.8x16mm Screws (M-A) into lower holes. Tighten screws with a Phillips screwdriver.
If wall has a wood stud frame, use a stud finder to locate the stud, then place Mount (A) against wall and mark drilling locations for top and bottom holes on only one side of the mount. Using a 1/8” (3.5mm) drill bit, drill holes 1.2” (35mm) deep. Insert a ST4.8x38mm Screw (M-B) into top hole, leaving 3mm of thread exposed.
Hang Mount (A) over screw and insert another ST4.8x38mm Screw (M-B) into lower hole. Tighten screws with a Phillips screwdriver.
OPTION C: Concrete Wall Installation
For concrete wall installation, place Mount (A) against the wall and mark locations with a pencil. Drill 1.2” (35mm) deep holes at marked locations using a 1/4” (6mm) drill bit. Insert Concrete Anchors (M-C) into holes, and insert two ST4.8x38mm Screws (M-B) into top holes, leaving 3mm if thread exposed.
Hang Mount (A) over two screws in the wall. Secure with two additional ST4.8x38mm Screws (M-B), and tighten screws with a Phillips screwdriver.
OPTION C: Concrete Wall Installation
Place PC tower on Mount (A), slide bottom support up until mount is fit vertically to PC, and tighten set screws using 4mm Allen Wrench (T-A). Slide side bracket into place to hold PC, and tighten screws using a Phillips screwdriver. The screws can be removed to adjust the side support bracket to one of two positions, a or b.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com