POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light Installation Guide
- October 30, 2023
- POWER-LITE
Table of Contents
POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light
Installation Instructions
This installation must be carried out by an electrician. Please read these instructions carefully before installation. Leave a copy for the user/maintenance engineer for future reference.
Safety
This is a mains powered product. Before installation, maintenance or cleaning please ensure the power supply is isolated.
Maintenance
- Please ensure the fitting has cooled down prior to performing maintenance on this product.
- If the product is not damaged in transport, it is supplied ready to use.
- Clean using a dry cloth. No detergent or water to be used.
Notes
Voltage input: AC220-240V/50/60Hz, using the newest high efficiency constant current driver. Anti electromagnetic interference, no mercury, no lead. Before using, please confirm that this product has not been damaged during transit.
Please keep packing material and small accessories far away from children. Avoid the eyes sighting the LED light-emitting area directly
Please keep products and packaging away from open fire or high temperature goods.
The fixture must not be modified. And modification will void the warranty and can make the product dangerous.
Please note the recommended clearance from the rear heat sink to any flammable materials is 0.2m. Under no circumstance should any insulation or similar be laid onto the fitting.
Applications
Hotel, meeting room, factory or office, residence or public facilities, commercial use, school, hospital and other environments.
LED panel light for indoor using only.
Installation Steps
Recessed
-
Take off Ceiling plaster tablet.
-
Connect the Wire.
-
Fix the panel Light on into the ceiling screens.
-
After steady the panel light, you can connect the electric current to use.
Surface Mounted
-
Fix the ceiling frame into the ceiling or wall.
-
Fix the panel light on the ceiling frame.
-
Connect the wire(AC/DC Wire) and put the location well.
-
After steady the panel light, you can connect the electric current to use.
Suspended
-
Take off the cassette and install the screw cassette.
-
Fix the cassette onto the ceiling.
-
Lock the Line controller into the cassette.
-
Adjust the length of the iron line well and the connect the power supply, then you can power.
Customer Service
1800 909 306
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>