Pekoko K1 Portable Color Printer User Guide

Pekoko K1 Portable Color Printer

WARNING AND NOTE

*This ink should not be in direct contact with the skin. Children under 10 years old should use this product when accompanied by an adult

1. PEKOKO is an electronic device with a built-in lithium battery. Please keep it in a dry environment to avoid fire.
2. Please Make sure that the tem perature and humidity meet the working cond itions of the device before turning on.
3. If the battery is significantly deformed, please stop using it immed iately. Recycle and dispose of the battery parts according to local laws and change new battery.
4. 1f the device is dropped or squeezed, please replace the battery accessories before using.
5. Please use the standard USB TypeC to charge the device.

Application Download Address

Packing List

1. Printer
2. Battery
3. Ink cartridge
4. Cartridge pull ring
5. Charging cable
6. Nozzle protection cover
7. Print Primer
8. Certificate of conformity
9. User Guide

Parameters

How to Start the First Printing

Install the pull ring on the cartridge.
Steps

1. Peel off the no22le seal film from the ink cartridge.
2. Install the pull ring to the cartridge. NOTE: When changing a new ink cartridge, remove the pull ring and install it on the new ink cartridge.

Install the ca rtridge and the pu ll ring into the printer

1. put  the ink cartridge (with the pull ring) into the printer with the nozzle facing down, and press the ink cartridge.
2. The cartridge is pressed by the stainless steel shrapnel without shaking, indicating that installed in place.

Install the battery on the printer

1. Insert the two locking points an the front of the battery into the corresponding grooves of the printer, and push the battery from the back to the front to ensure that the points fully enter the grooves. Note: The insertion angle should be ry smay ll, try to bepara lie\ to the printer, or the batte ma be broken.
2. Press the elongated spring button on the back of the cartridge,and press the battery downwards at the y p g same time, let the two locking points an the back of the smoothlbattery, thesl n ide into release the the cosprrresing ondinbutton to grooves complete the battery installation. Note: Make sury re that the rymetal contact probe in front of bouthe nce batup tenoris mallcl yean, , witd , hout scwithout ratchinshort g cirand cuit, bendcan ing.

Power on and start printing.

1. Press and hold the bottom power button <!) for 2 seconds to turn on the device, When the indicator light tury ns blue, showing the device is turned on normall and the cartridge is correct.
2. top button with index finger there will be bee sound, then move the p device continuously until hear in information s, indicating that the information Note: For the first printing, the printing result may be not good because the ink cartridge is not working for a long time and the temperature is not enough. If the movlng speed is tao fast (over lOcm/s), it may cause the printing disconnected.

Device goes into standby and wakes up

1. The foder vic90 e will enter the standby state when is placed seconds without p operation. And flash the breathing light. Click the rint button @ on the top and wait for 3-4 seconds,then will wake it up. The  blue light indicates that the device has been woken up
2. It could receive files transmitted by the APP only when the device is awake. During the file transfer, the device flashes red. The blue light will be restored after receiving. lf the device is not used for more than 5 minutpes, we re•tf commend to cover a the g tinomezzle , protection.it is not used for lon we recommend to turn off the machine and remove the battery.

Use of nozzle protection cover and rubber sheet

1. The nozzle of the ink cartridge is a fragile part, which should be protected g if not used for a long time. There are two protrudin small circles on the two sides of the protective cover, which is convenient for removing.
2. The U-shaped rubber plastic sheet of the back of the protective cover is used to clean the ink cartridg e pnozzle. g When dust accumulates near the nozzle or the rintin line is missing, could use the rubber sheet to clean the nozzle from top to bottom.. If the rubber sheet can not work well, can also use a clean cloth or tfssue ta clean the nozzle surface.

0peration Instruction of APP

lEd it / maintain a new printing

1. How to enter text, barcode, etc.
   Open the APP, as shown in Figure 1. Click New, enter the g file name, and click OK then will shown in shape, tiFime ure2. and otClick her the menus text, bar belocow de, then QR will code, displaline, y in thee corresponding content to modiitor

2. How to import pictures.
   After creating a new edit, click on the Logo menu picture into the editor, and then ad below t to its important

3. Modify the si,e, color and other attributes.
   Select the element that needs to be modified, as Fishorotatgurwn e ion3in , Figcan uposition re modi2.

Connecting printer device and sending printing file

1. When all elements of the file are edited, click the save button in the upper right corner.
2. After saving, click the connection menu below the editor. The APP page will jump to the home page. As shown in Figure 4.
3. At this time, keep the machine power on and wake up. Connect Bluetooth, and it will show as Figure 5 after connecting finished.
4. Click Print, at this time to ensure that the machine is waking up status, then can transfer files.
5. After the file transfer is finished, then can print.

Introduction of Various Status Indicators Light

1. The cyan breathing light flashes means that the device is in standby mode. (If there is no operation for 20 minutes, the printer will automatically power off)
2. The blue breathing light flashes means that the device is ready to print.
3. The purple breathing light flashes means that the device is printing.
4. The red breathing light flashes means that the device may accept app transfer files, ink cartridge tailure or tile transfer failure.
5. The red light is on when the battery is charged, and the red light will be off when the battery is full.

Follow us

www.pekoko.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>