V I V O MOUNT-TS38B Telescoping Dual Monitor Wall Mount Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Telescoping Dual Monitor Wall
Mount
Instruction Manual
MOUNT-TS38B Telescoping Dual Monitor Wall Mount
SKU: MOUNT-TS38B
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.https://vivo-us.com/products
/mount-ts38b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Stud mounting is required. Use of a stud finder and level is recommended.
Place Wall Mount (A) in the desired location, and use a pencil to mark
drilling locations.
STEP 2
Using a 4.5mm (11/64”) drill bit, drill approximately 55mm (2.2”) into marked
locations. Secure Wall Mount (A) to wall using ST6x60mm Screws (W-A) and a
Phillips screwdriver. STEP 3
Slide Arm (B) onto Wall Mount (A) and secure using 6mm Allen Wrench (T-C).
STEP 4
Assemble VESA Plates (C) to the back of the monitors using M4x12mm Thumbscrews (M-A). For curved monitors, use M4x30mm Screws (M-B) with M4 Spacers (M-C).
STEP 5
Slide VESA Plates (C) with monitors onto the Swivel Arm (B) and secure using M6 Cap Nuts (S-A).
STEP 6
Secure Cable Clips (D) to Arm (A) and manage cables.
STEP 7
Adjust the tilt using 5mm Allen Wrench (T-B). The monitors can be leveled using 3mm Allen Wrench (T-A). Adjust the length of Arm (B) using 3mm Allen Wrench (T-A).
Love your new VIVO setup and
want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| WWW.ViVO-US.COm
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within <30m
– 61% within < lhr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 09/13/2022
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Telescoping Dual Monitor Wall Mount – VIVO - desk solutions, screen mounting, and more