VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi-Flush Mount Light Instruction Manual
- October 30, 2023
- VAXCEL
Table of Contents
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
C0264
C0264 Matte Black and Satin Brass Incandescent Semi-Flush Mount Light
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING
OR SERVICING THIS FIXTURE.
NOTE:
- Before installing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
![VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi Flush Mount Light
- Hardware Package](https://manuals.plus/wp- content/uploads/2023/06/VAXCEL-C0264-Matte-Black-and-Satin-Brass-Incandescent- Semi-Flush-Mount-Light-Hardware-Package.jpg)
Installation Steps
Turn off the power at fuse or circuit box.
-
Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B)
-
Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
• Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
• Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
• Attach the fixture ground wire (bare wire) to the mounting strap unit (A) with the green ground screw. Then, depending on local code, connect it to the house ground wire with the wire connector (C). Carefully put all of the wires back into the outlet box. -
Remove the finial (D) from the mounting strap unit (A).
-
Attach the fixture to the mounting strap unit (A) by inserting the finial (D).
NOTE: Depth of threaded pipe may need to be adjusted to properly fit the finial. -
Install 6 x 60W Max. candelabra base bulbs (not included). Check revamping label at socket area or packaging for maximum wattage allowed.
Turn on the power at fuse or circuit box.
![VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi Flush Mount Light
- Installation Steps](https://manuals.plus/wp- content/uploads/2023/06/VAXCEL-C0264-Matte-Black-and-Satin-Brass-Incandescent- Semi-Flush-Mount-Light-Installation-Steps.jpg)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
![VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi Flush Mount Light
- Spare Parts List](https://manuals.plus/wp- content/uploads/2023/06/VAXCEL-C0264-Matte-Black-and-Satin-Brass-Incandescent- Semi-Flush-Mount-Light-Spare-Parts-List.jpg)
![VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi Flush Mount Light
- Installation Steps 2](https://manuals.plus/wp- content/uploads/2023/06/VAXCEL-C0264-Matte-Black-and-Satin-Brass-Incandescent- Semi-Flush-Mount-Light-Installation-Steps-2.jpg)
220228
Documents / Resources
|
VAXCEL C0264 Matte Black and Satin Brass Incandescent Semi-Flush Mount
Light
[pdf] Instruction Manual
C0264 Matte Black and Satin Brass Incandescent Semi-Flush Mount Light, C0264,
Matte Black and Satin Brass Incandescent Semi-Flush Mount Light, Satin Brass
Incandescent Semi-Flush Mount Light, Incandescent Semi-Flush Mount Light,
Semi-Flush Mount Light, Mount Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>