IPmitter IPMIT204 2.4GHz 48V 300Mbps IP Bridge User Guide
- June 3, 2024
- IPmitter
Table of Contents
IPmitter IPMIT204 2.4GHz 48V 300Mbps IP Bridge
Powering
- Option 1 – Power from 12V DC (via the 2.1mm DC Socket), the current consumption is 300mA. The IPMIT204 is polarity sensitive so connections must be made correctly.
- Option 2 – Power the camera using 48V PoE, in the RJ45 WAN/POE Socket The IPMIT204 will take approximately 1 minute to boot up.
- Function Button
- LED Display
- Setting
- 12V DC. 2.1mm DC Socket
- Connection LEDs(Power, WiFi, WAN, LAN)
- WAN – 10Mbs/ 100Mbs 48 PoE network socket
- LAN – 10Mbs/ 100Mbs network socket
- Reset/ Pair Button
Standard WiFi Bridge Setup
Available Channels – Available channels 1-14
The IP mitters are sent out as default on H (Host), and need pairing up before installing. One IP mitter needs to be set to H (Host) and the other to C (Client), they both have to be set to the same channel number.
Example – Pairing
- Press the F (function) button and “H” will flash. Press the S (setting) button to change to “C”
- Pressthe F button 4 times to move across the display, then the whole display will flash for about 5secondsto indicate the settings have been saved.
- Now pressthe RST (reset) button for 1 second on both IPmitters. The display will change to a P with a rotating segment whilst pairing and will show P and a value once paired. Pairing can take up to 2 minutes.
The strength will range P-01 (Good) to P-75 (Poor). If P-95 showsthen the IPmitters have not paired. To add more clients(up to 4) to one host then set the channel on the new client and pressthe reset buttons on the new client and the Host.
If using the IPMIT204 with a ZIP Recorder then the cameras needsto be manually configured, scan the QR code to the left for the “how to guide”
- LAN Port 1 Speed 10Mbs/ 100Mbs
- LAN Port 2 Speed 10Mbs/ 100Mbs
- Frequency 2.4Ghz
- wireless data Speed 300Mbps
- Wireless Standard IEEE802.11B/G/N
- PoE Voltage 48V
- 12V InputOption Yes
- Max TxDistance 700m (Recommend 350m)
- Easy Pair Technology Yes
- Support 1 – 1 Yes
- Support 1 – Many Yes
- Modes Access Point/ Repeater
- Mounting Wall Or Pole (Not Supplied)
- Dimensions 165 x 88 x 56mm
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or nonperformance of the equipment referred to.
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery, and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council.
