VAXCEL P0374 Huntley Natural Brass Mini Pendant Hanging Light Instruction Manual

VAXCEL P0374 Huntley Natural Brass Mini Pendant Hanging Light

Product Information

• Product Code: P0374
• Product Name: Bolt Nut (G)
• Includes: Assembly Kit 6485MM (1 SET), Set Screw 6489FS, 10282CS
• Compatible Bulb: Max.60W Type A Bulb (not included)
• Model Numbers: 3330RD, 3331RD, 3332RD, 220303

Product Usage Instructions

1. Assemble the product using the Assembly Kit 6485MM and Set
   Screw 6489FS.

2. Locate the socket for the bulb.

3. Insert a Max.60W Type A Bulb into the socket.

4. Ensure that the bulb is securely in place.

5. Turn on the power and enjoy your Bolt Nut (G) product.

WARNING
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTES:

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included)

Installation Steps

Turn off the power at fuse or circuit box

1. Thread two fixture mounting screws through the mounting strap, and then secure with two lock nuts. Adjust the length of the fixture mounting screws if necessary.

2.  Attach the mounting strap to the outlet box by using two mounting screws.

3. Rod Connections:

4. Thread the fixture wire from the fixture through the lower rod, and then secure the lower rod onto fixture using the threaded pipe.

5. Thread the fixture wire through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe.

6. Thread the fixture wire through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe.

7. Thread the fixture wire through the hook and fixture canopy, and then secure the hook onto the upper rod using the threaded pipe.
   Note: Length adjustable from 14-3/4″ to 59-3/4″. Use fewer rods if shorter length is desired.

8. Hang the hook to the loop of the fixture canopy.

9. Pull out the source wires from the outlet box. Make wire connections using wire connectors as follows:

10. Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

11. Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source. Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green ground screw. Then connect it to the house ground wire with the wire connector.

12. Carefully put the wires back into the outlet box.

13.  Attach the fixture canopy to the mounting strap by inserting the fixture mounting screws, and then secure it with two ball nuts.

14. Install 1x60W Max medium base bulb (not included) to the socket. Check revamping label at socket area or packaging for maximum allowed wattage.

15. Attach the glass shade to the glass bracket by threading set screws onto the glass notches. (Do not over tighten.)

16. Angled mounting recommended for a vaulted or angled ceiling. (See Fig. 1)

Turn on the power at fuse or circuit bo
The following parts are available for re-order if damaged or missing.

Spare Parts List:

Documents / Resources

| VAXCEL P0374 Huntley Natural Brass Mini Pendant Hanging Light [pdf] Instruction Manual
P0374, P0374 Huntley Natural Brass Mini Pendant Hanging Light, Huntley Natural Brass Mini Pendant Hanging Light, Natural Brass Mini Pendant Hanging Light, Pendant Hanging Light, Hanging Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>