Sonetics Apex Connect User Guide
- June 6, 2024
- Sonetics
Table of Contents
Apex Connect
User Guide
BASIC FEATURES — CONTROLS
STATUS LED FUNCTIONALITY
Battery level and connection status are indicated by the LEDs as shown below:
Connection Status
When powered on, the LEDs indicate the following connection status:
| LED | Status | Lights (blinking/solid) |
|---|---|---|
| DECT | Pairing/reconnecting | |
| DECT | Paired | |
| Bluetooth | Pairing/reconnecting | |
| Bluetooth | Paired | |
| Mic | Device Mute ON | |
| Mic | Radio transmit or Intercom On/Toggle transmit |
Charge Status
When plugged in, the color of the Power LED indicates the charge status.
Fully charged
Charging
NEW BLUETOOTH PAIRING
-
Turn ON your Bluetooth device.
-
Turn ON the Apex Connect.
-
Make sure your Bluetooth device is in pairing mode (follow your manufacturer’s instructions).
-
Put the Apex Connect into pairing mode by simultaneously pressing PTT and + buttons, then hold for 3 seconds and release. Bluetooth LED should be blinking Blue.
-
Pairing successful when Bluetooth LED is solid Blue.
BLUETOOTH USE
Use + or – on the Apex Connect or your Bluetooth device to adjust the volume.
Bluetooth pairing time out is 40 seconds on the Apex Connect.
DECT PAIRING
For first use:
-
Place Base Station into pairing mode (see Base Station manual for details).
-
With the Apex Connect powered on, simultaneously push and hold the PWR and PTT buttons for 2 seconds, then release. The DECT LED light will blink green while pairing.
-
The status LED will be solid green when the connection is successful. If it is not, repeat the pairing process.
CHARGING
Use supplied USB-C charging cable and AC wall adapter.
WEAR OR MOUNT YOUR CONNECT
WARNINGS:
Magnets can pinch and break bones. Use extreme caution when handling magnets
to avoid magnets snapping or slamming together. Do not put hands, fingers or
any other body parts between magnets.
Use caution to keep magnets at a safe distance from metals, steel, and other
magnets to avoid instant impact, splintering, or breakage.
Magnetic fields, especially those produced by rare earth magnets, can affect
pacemakers and other implanted medical devices. Extreme care should be taken
to keep magnets away from these devices to avoid deactivation. Please consult
a medical professional if there are any questions regarding an implanted
device and magnets.
Complete manual available at
sonetics.com/support
www.sonetics.com
800-833-4558
17600 SW 65th Ave
Lake Oswego, OR 97035 USA
© Sonetics Corporation. All Rights Reserved.
The information in this document is subject to change without notice.
No part of this document may be copied or reproduced in any form without the
prior written consent of Sonetics Corporation.
600-3095-00 Rev A
Documents / Resources
|
Sonetics Apex
Connect
[pdf] User Guide
Apex, Connect, Apex Connect
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>