VAXCEL C0275 Integrated LED Chrome Flush Mount Ceiling Light Fixture Clear Bubble Acrylic Shade Instruction Manual

C0275 Integrated LED Chrome Flush Mount Ceiling Light Fixture Clear

Bubble Acrylic Shade

Product Information

The product is a light fixture with the model number C0275. It comes with an assembly kit that includes an outlet box, a mounting strap unit (A), mounting screw (B), wire connector (C), and finial (D). The fixture has a dimming range from 100% full illumination to 10% of full illumination.

Product Usage Instructions

1. Turn off the power at the fuse or circuit box.
2. Attach the mounting strap unit (A) to the outlet box using two mounting screws (B).
3. Pull out the source wires from the outlet box and connect them to the fixture wire using wire connectors (C). Connect the fixture ground wire to the house ground wire with the wire connector (C).
4. Put all of the wires back into the outlet box.
5. Attach the ceiling plate to the mounting strap unit (A) by inserting the threaded pipe from the mounting strap unit (A) into the center hole on the ceiling plate, then secure the ceiling plate with finial (D).
6. Turn on the power at the fuse or circuit box.

Note: Before installation, consult local electrical codes for wiring and grounding requirements. Also, be sure to shut off power before installing or servicing this fixture. Read and save these instructions. If any parts are damaged or missing, refer to the spare parts list and order an assembly kit 6595MM which includes a mounting strap unit (A), mounting screw (B), wire connector (C), and finial (D).

ASSEMBLY AND INSTALLATION INSTRUCTIONS

WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included)

Parts List

Installation Steps

Turn off the power at fuse or circuit box.

1. Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B).
   Note: The depth of threaded pipe on the mounting strap unit may need to be adjusted to properly fit the fixture.

2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

   • Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
   • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
   • Attach the fixture ground wire (bare wire) to the mounting strap unit (A) with the green ground screw, then depending on local code, connect it to the house ground wire with the wire connector (C).
     Carefully put all of the wires back into the outlet box.

3. Attach the ceiling plate to the mounting strap unit (A) by aligning and inserting the threaded pipe from the mounting strap unit (A) into the center hole on the ceiling plate, then secure the ceiling plate with finial (D).

Turn on the power at fuse or circuit box.

Note: Dimming range: 100% full illumination to 10% of full illumination.

The following parts are available for re-order if damaged or missing.

Spare Parts List

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>