Humanscale Nova Wireless Charging Desktop Base Instruction Manual
- October 30, 2023
- Humanscale
Table of Contents
Humanscale Nova Wireless Charging Desktop Base
Included Parts
Assembly Instructions
- Connect the Nova Light power cord to the output jack underneath the Charging Base
- Route the Nova Light power cord to the rear of the Charging Base
- Insert the Light into the Charging Base. Connect the AC adapter to the Charging Base’s power cord
Wireless Charging
LED Indicator will flash RED if foreign objects are placed on the charging field. When chargeable device is placed on charging field, white LED will turn on while charging, and turn off* when fully charged. When chargeable device is removed, LED will turn off. Depending on your phone manufacturer’s settings, this may not apply.
Safety and Care Instructions
- Unplug from power source before cleaning.
- Wipe clean with a soft damp cloth.
- Avoid ammonia-based cleaners and abrasives.
- Do not expose power cord to liquids or high temperatures.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed
FCC STATEMENT
FCC/CAN ICES Notice
Wireless Charging Desktop Base for Nova Series Model N
FCC ID: 2AMDTWCDB
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. To ensure
compliance with FCC and ISED RF exposure requirements this device must be
installed to provide a minimum of 20cm between the device and people.
The FCC requires the user be cautioned that any changes or modifications made to this device that are expressly approved by Humanscale may void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC: 23760-WCDB
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:1.This device may
not cause interference. 2.This device must accept any interference, including
interference that may cause undesired operation of the device. To ensure
compliance with FCC and ISED RF exposure requirements this device must be
installed to provide a minimum of 20cm between the device and people.
1114 6th Ave. 15th Floor New York, NY 10036
www.humanscale.com
For our terms and conditions please go to https://www.humanscale.com/about
/legal-information/terms-conditions.cfm © 2022 Humanscale Corporation. The
text and artwork are copyrighted materials. All rights reserved. The
Humanscale mark and logo are trademarks of Humanscale Corporation and are
registered in the United States and certain other countries