VENTION Elf E06 True Wireless Bluetooth Earbuds User Manual

True Wireless Bluetooth Earbuds
EM EO6
User Manual VWS EST

Elf E06 True Wireless Bluetooth Earbuds

At a glace

Specification

Operating instructions

1. Power on
   a. When the charging case opens, the earbuds power on.
   

2. Pairing and connection
   1  Earbuds are ready to pair right out of the charging case.
   Note: If the pairing fails, please check whether the earbuds are fully charged and repeat the operation above.
   2  Open the Bluetooth menu on your device. In the list of discovered Bluetooth devices, tap or click your Venation E06.
   Note: For the first-time pairing, please keep the pairing range within 1m. After the pairing is successful, the earbud automatically powers off when placed back in the case, and you can use either earbud independently.
   

3. Power off ‘ + Auto power off
   a. The earbuds will automatically power off after 5 minutes of not being connected.
   b. When the earbuds are not paired with the phone due to the long distance, it will automatically power off if it is not connected for more than 5 minutes.
   + Manual power off
   a. Earbuds automatically power off when placed back in the charging case with the lid closed.
   b. When it is connected and not playing any content, press and hold the multi-function button for S seconds to power off (left or right).

4. Music mode:
   Play/Pause: Tap the multi-function button twice quickly (left or right)
   Skip backward: Press and hold the multi-function button on the left earbud for 2 seconds
   Skip forward: Press and hold the multi-function button on the right earbud for 2 seconds
   Decrease the volume: Tap the multi-function button (left)
   Increase the volume: Tap the multi-function button (right)

5. Phone Mode
   Decline the call: Press and hold the multi-function button for 2 seconds (left or right)
   Answer a call: Tap the multi-function button twice  quickly (left or right)
   End a call: Tap the multi-function button twice quickly (left or right)

6. Using the voice assist function When the phone is on standby or playing music, tap the multi-function button 3 times (right)to activate your voice assistant. Tap the multi-function button 3 times (right) to stop the mobile device voice control.
   

7. Clear the Earbuds device list When the earbuds are powered on (and the device’s Bluetooth function is turned off), tap the multi-function button 4 times to clear the Bluetooth devices list.
   

8.  Charging case status light
   Status| Color| Indication
   ---|---|---
   While charging the charging case| White| The indicator on the charging case repeatedly flashes in white. The indicator lights up in white after charging is complete.
   While charging the earbuds| Green| The indicator lights up in green.
   When the remaining battery charge is low (charging case)| Green| When you set the earbuds into the charging case, if the remaining battery charge of the charging case is 30% or lower, the indicator on the charging case flashes in green and then turns off.

Important safety instructions

Please read all instructions and wamings before using this product. Inappropriate use will cause damage to the product or personal safety.

1. Do not expose products containing batteries to excessive heat(e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment, do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
2. Improper use of the product can easily cause product damage or may endanger personal and property safety.
3.  If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
4. Non-professionals are strictly forbidden to disassemble this product.
5.  Use this product only with an agency-approved power supply that meets local regulatory requirements.

Declaration on toxic or hazardous substances and This table is prepared in accordance with the provisions of SU/T 11364.

0: Indicates that this toxic or hazardous substance contained in ail of the homogeneous materials for this part is below the limit requirement of GB/T 26572
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE 3: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2A7Z4-NBK
Contents

NINGBO FULMAN COMMUNICATION TECHNOLOGY CO.,LTD|
---|---
PART NAME| NBM| PART MODEL| VWS-E37
DESIGNER| Melissa| UNIT| mm| Client NO.|
CHECK| | REV| AO| DWG.NO.|
APPR.| | PAGE| 1/1| UPDATE| 2023/09/26

• ­7090mm
• 90x350mm
• 157g
• C100M:0Y:.0K:0
• Pantone Process Cyan C

For more interesting information and events, please follow us on social media platforms:

https://www.facebook.com/qr/358170595920336https://www.linkedin.com/company/ventiontechnology/https://www.instagram.com/ventionhdmicable/

For warranty service or support, please contact Venation team:
Website: www.ventiontech.com
Email: vention@ventiontech.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>