Humanscale Product Cleaning Guidelines Instructions

Product Cleaning Guidelines Instructions Manual

HUMANSCALE PRODUCT CLEANING GUIDELINES

As it relates to COVID-19, please reference the CDC cleaning guidelines here.
For a list of disinfectants to use against SARS – CoV-2, please visit the United States Environmental Protection Agency website.
Like all disinfectant products, please read and follow the instructions on the manufacturer’s label regarding use, application, and safety guidelines before cleaning.

When sanitizing a product, please remember the following:

• Never mix ammonia or any cleaning product with bleach.

• Use proper protective gear such as eye protection, and non-porous or rubber boots and gloves.

• When using disinfectants indoors, open windows and doors to create a well-ventilated area.
  Do your best not to breathe in fumes.

• A small area on the surface should be tested before cleaning the rest of the product.

Please note! Improper cleaning, care, or maintenance of any Humanscale product surface or material may result in the voiding of that product’s warranty.

INSTRUCTIONS FOR CLEANING VARIOUS PRODUCTS

CLEANING INSTRUCTIONS FOR SEATING PRODUCTS

HOW TO CLEAN CHAIR ARM PADS & BASES:

• Please use a mild soap (i.e. Ivory Liquid Soap) and water
• Gently wipe with a soft cloth to remove dirt and stains
• Dry gently with a dry soft cloth
• For disinfection: Denatured alcohol or ethyl alcohol in a maximum concentration of 5% is recommended

HOW TO CLEAN MESH, TEXTILES, LEATHERS AND WOOD:
Humanscale textiles and leathers for all chairs:

Occasional, Trea, Path
CL| Corvara| Grade 3| Freedom, Liberty Task, Smart,
Occasional, Trea, Path
ML| Maribo| Grade1| Summa
FormSense
Eco Knit™**| KT| Revital| —| Path

MESH CARE

MESH (DASH, MONOFILAMENT STRIPE, PINSTRIPE, SILVER CHECK, AND CATENA) CLEANING INSTRUCTIONS:

To effectively clean your mesh textile, you must immediately remove the stain or dirt spot. Based on our tests, we found that quickly removing the stain results in a completely clean textile. However, allowing the stain or dirt to set over time leads to more difficulty when cleaning. While most of the yarns used in our mesh textiles are naturally resistant to moisture, substances can penetrate the surface and become trapped within the weave structure, making them more difficult to remove.

Fortunately, our mesh fabrics respond very well to almost all types of cleaning agents: soap and water, Formula 409®, Carbona®  Pet Stain Remover, and/or a solution made of  50% alcohol and a solution made of 1/10 bleach and 9/10 water. These cleaning solutions do not damage the mesh or leave any spots or residue.

General Stains
To remove dirt and stains that result from everyday wear and tear, use a solution of mild soap, such as Ivory® liquid soap and water. Other options include Carbona Pet Stain  Remover or Formula 409. Apply the solution over the soiled area and let it sit for approximately two minutes. Rub gently with a sponge or brush to remove the stain. Blot excess cleaner with a dry cloth and repeat at least once more to ensure total stain removal.

Stubborn Stains
For tougher stains, such as mustard or ketchup, use mild soap and water or Carbona Pet Stain Remover and apply the same system as stated above. Stains from certain substances, such as salad dressing, are a bit more difficult to remove because the oils within the substance penetrate the yarns of the mesh. Remove these stains quickly with soap and water or Formula 409 and rub gently with a sponge or brush to remove the stain. Blot excess cleaner with a dry cloth and repeat as needed.

FABRIC CARE

LOTUS CLEANING INSTRUCTIONS:
Due to its polyurethane and lightly textured surface, Lotus simply wipes clean.
Below is a list of recommended over-the-counter cleaning agents.

• Mild soap, such as Ivory liquid and water
• A mild solvent such as Carbona Pet Stain Remover
• Formula 409
• A solution made up of 50% alcohol and 50% water
• Bleach solution made up of 10% bleach and 90% water

LOTUS CLEANING INSTRUCTIONS (cont’d):
Lotus White Cleaning Instructions for Issues with Dye of Jeans Rubbing Off onto Textile:
Spray Fantastik® or another non-bleach-based cleaner directly onto the cushion and using the nylon side of a scrub sponge, scrub it gently off. Use the soft side of the sponge to remove the liquid. Let it dry. Please beware that we do not guarantee that this method will fully remove all stains caused by the dye coming from the jeans.

CORDE 4, FOURTIS AND GINKGO CLEANING INSTRUCTIONS:

Cleaning Agents
Always use water-soluble solvents such as dishwashing detergent.

For liquid-based stains that penetrate the textile, removing the stain as quickly as possible will minimize the likelihood of permanent staining.
For more substance-based stains that sit on top of the fabric, immediately scrape off the excess substance with a knife or coin.
Vacuuming the cushions/textiles on a weekly basis will extend the life of the material as well as identify any stains that need to be removed

For removal of small, moist stains, such as coffee, soda, juice, some salad dressings, etc.

1. Combine one-part detergent with three parts water to make a cleaning solution (one tbsp. of detergent with three tbsp. of water)
2. Moisten a soft sponge with a solution
3. Wet the area with a sponge and wipe it gently and thoroughly to remove the stain

For removal of larger and substance-based stains, such as ketchup, mustard, salad dressing, etc.

1. Remove excess substance with a knife-edge or a coin
2. Let stain dry
3. Remove built-up stain with a soft brush (a toothbrush works well)
4. Using cleaning solution given above, wet the area with a sponge and wipe it gently and thoroughly to remove a stain

OXYGEN, SPRINT, REMIX 2 CLEANING INSTRUCTIONS:

Oxygen
Wipe or scrub clean with a water-based cleaning agent or solvent: Depending on the stain, you can use a dry-cleaning solvent, the foam of a mild detergent, or upholstery shampoo.

Sprint
Wipe or scrub washable up to 140˚F. Clean with a water-based cleaning agent or solvent: Depending on the stain, you can use a dry-cleaning solvent, the foam of a mild detergent, or upholstery shampoo.

Remix 2

• Do Not Wash
• Do Not Bleach
• Do Not Tumble Dry
• Iron at Medium Heat
• Dry Clean only

FORMSENSE ECO KNIT CLEANING INSTRUCTIONS:

Revital

• Wipe or scrub washable up to 104°F (40°C)
• Clean with a water-based cleaning agent or solvent
• Depending on the stain, you can use a dry-cleaning solvent, the foam of a mild detergent, or upholstery shampoo
• Bleach cleanable, 10% bleach and 90% water

LEATHER CARE

LEATHERS CLEANING INSTRUCTIONS:

• Protect leather from direct sunlight, extreme heat, and sharp objects
• Always remove contaminants as quickly as possible in order to avoid residue on the leather product.
• Regularly wipe the leather with a damp cloth
• Wipe leather in a circular fashion with a cloth moistened with a very mild soap solution such as Ivory liquid soap
• Dry and polish the leather with a dry cloth
• Avoid soaking the leather
• Avoid chemical cleaning agents with solving agents such as alcohol or benzine
• Generally, test all cleaning agents in an inconspicuous location
• Never rub a specific location with great pressure (otherwise the surface may be damaged)

WOODCARE

WOOD-BACK COLLECTION CARE:

Regular Cleaning
Dust as needed with a dry or slightly damp cloth. If a damp cloth is used for cleaning, wipe right away with a dry cloth in the direction of the grain.

Periodic Cleaning
Wipe the product with a soft cloth and a quality furniture polish, we recommend Guardsman® Clean and
Polish or similar product. Avoid products containing wax or silicone.

Minor Repair of Light Surface Scratches
Rub the surface with the grain using No. 000 steel wool.

Apply a scratch covering polish that closely matches the hue of the wood. (Recommended scratch cover: Old English® Scratch Cover for light or dark wood)
Wipe and dry in the direction of the grain.

CLEANING INSTRUCTIONS FOR SIT/STAND PRODUCTS

HOW TO CLEAN:

• All exterior surfaces will withstand cleaning by most commonly used, diluted, non-abrasive solutions such as quaternary ammonium compounds, ammonia, enzyme cleaners,  bleach or alcohol solutions
• Pen and permanent and dry erase markers can be removed with 91% isopropyl alcohol and a soft cloth
• Never clean your Sit/Stand product with steel wool or other abrasive materials that will damage the surface finish
• It is important to thoroughly dry all surfaces after cleaning
• It is recommended to test any cleaning solution on a small, inconspicuous area to ensure the surface is not harmed

CLEANING INSTRUCTIONS FOR MONITOR ARM PRODUCTS

disinfecting wipes

CLEANING INSTRUCTIONS FOR LIGHTING PRODUCTS

CLEANING INSTRUCTIONS FOR ERGO TOOLS

wipes
CPU Holders| Bleach free disinfecting wipes

CLEANING INSTRUCTIONS FOR CABLE MANAGEMENT PRODUCTS

NEATTECH MESH CARE

MESH (MONOFILAMENT STRIPE AND CATENA) CLEANING INSTRUCTIONS:

To effectively clean your mesh textile, you must immediately remove the stain or dirt spot. Based on our tests, we found that quickly removing the stain results in a completely clean textile. However, allowing the stain or dirt to set over time leads to more difficulty when cleaning. While most of the yarns used in our mesh textiles are naturally resistant to moisture, substances can penetrate the surface and become trapped within the weave structure, making them more difficult to remove.

Fortunately, our mesh fabrics respond very well to almost all types of cleaning agents: soap and water, Formula 409®, Carbona® Pet Stain Remover, and/or a solution made of  50% alcohol and a solution made of 1/10 bleach and 9/10 water. These cleaning solutions do not damage the mesh or leave any spots or residue.

General Stains
To remove dirt and stains that result from everyday wear and tear, use a solution of mild soap, such as aIvory® liquid soap, and water. Other options include Carbona Pet Stain  Remover or Formula 409. Apply the solution over the soiled area and let it sit for approximately two minutes. Rub gently with a sponsor brush to remove the stain. Blot excess cleaner with a dry cloth and repeat at least once more to ensure total stain removal.

Stubborn Stains
For tougher stains, such as mustard or ketchup, use mild soap and water or Carbona Pet Stain Remover and apply the same system as stated above. Stains from certain substances, such as salad dressing, are a bit more difficult to remove because the oils within the substance penetrate the yarns of the mesh. Remove these stains quickly with soap and water or Formula 409 and rub gently with a sponge or brush to remove the stain. Blot excess cleaner with a dry cloth and repeat as needed.

CLEANING INSTRUCTIONS FOR WELLGUARD™ SEPARATION PANELS

alcohol, Clorox Healthcare Bleach Germicidal Wipes,  ethyl alcohol 96%, soap solution
WellGuard™ Separation Panel – Felted PET| Mild detergent and warm water or 10% bleach/90% water (follow up with a damp cloth containing  only water)

CLEANING GUIDELINES MUST BE FOLLOWED TO AVOID DAMAGE TO THE PANELS.

PETG

CLEANING SOLUTION:
Use a soft microfiber cloth to clean the panels. It can take the following cleaners:

• Hydrogen Peroxide (3% Solution)
• Isopropyl Alcohol
• Clorox Healthcare Bleach Germicidal Wipes
• Ethyl Alcohol 96%
• Soap Solution

DO NOT USE:

• Ammonia Based Cleaners
• Acetone

FELTED PET

CLEANING SOLUTION:
Use a damp cloth with mild detergent and warm water. Follow up with a damp cloth with only water.
Pat dry with a lint-free cloth.

For more serious stains, use a cloth with 10% bleach/ 90% water. Dab the soiled area. Follow up with a damp cloth containing only water. Pat dry with a lint-free cloth. Always test in an inconspicuous location first.

Humanscale Corporate HQ 1114 Ave. of the Americas, 15th Floor New York, NY 10036

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>