GLACIER BAY BP0658 Slim Non Electric Bidet Seat User Guide

GLACIER BAY BP0658 Slim Non Electric Bidet Seat User Guide

THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this bidet toilet seat. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

Safety Information

• Use this product only for its intended use as directed in this manual.
• Do not disassemble, repair, or remodel the unit, as this will void the warranty.
• Do not stand or drop heavy objects on this product and do not insert any object into openings or hose.
• Do not pull or stress the water supply hose.
• Do not use in hot water line. Temperature above 40℃ (104℉) will damage the product and void your warranty.

Pre- Installation

• Turn off the water supply before installing this bidet toilet seat.
• Before begining the installation of this product, ensure all parts are present.

Compare all the parts with the Package Contents section of this manual. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for replacement parts at 1-855-HD- GLAClER or visit www.HomeDepot.com.
Estimated Installation Time: 8 minutes.

TOOLS REQUIRED

• Adjustable Wrench

• Toilet water supply Line

PACKAGE CONTENTS

INSTALLATION

1. Positioning the template

   • Wipe the bowl surface clean. Lay the template (B) over the top of the toilet bowl.
   • Position the template (B) to how you want the bidet seat to pair up with the bowl once installed.

2. Installing the top mount fittings

   • Assemble nylon nut (F), fixed base (C), sliding plates (D) and bolts (E) into the ceramic in the order as shown .
   • Adjust the fixed base (C) and lock the bolts (E). Make sure the fixed base (C) is fixed on top.
     

3. Installing the bottom mount fittings

   • Screw in the nuts (G) and washer (H) from the underside of the ceramic until the fixed base (C) is fixed.

4. Removing the template

   • Remove the template (B) from the bowl and discard it.

5. Positioning the seat

   • Align the bidet seat (A) with the fixed base (C).

6. Attaching the seat

   • Push the bidet seat (A) backward to attach it to the fixed base (C)

7. Latching the seat

   • You will hear a “click” when the bidet seat (A) is securely locked in.

8. Removing the seat

   • Press the button and push the seat forward forcefully to remove.

9. Turning off the water shutoff value

   • Drain the remaining water from the toilet cistern.

10. Disconnecting the inlet hose

    • Unscrew the existing toilet cistern inlet hose from the wall.
      

11. Connecting the hoses

    • Assemble the toilet cistern inlet hose, water inlet hose (I), T-shaped connector (J) as shown in the diagram.
      Note: all joints should be locked to avoid water leaking.

12. Finishing installation

    • Make sure all joints are locked and the knob on the bidet seat is in the closed position to avoid water spray, then turn on the water shutoff value to use normally.

Care and Cleaning

  CAUTION:

• Prohibits any indivisual from performaing any action with this symbol.
• Prohibits any individual from dismantling product.
• Keep away from any extreme heat or fire.
• Operate only as instructed.

NOTE: Improper care may cause the warranty to become invalid.

• Always test your cleaning solution on an inconspicuous area before applying to the entire surface. Avoid using aerosol products.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
• Do not allow chemicals and cosmetics (such as fingernail polish and aftershave) to come in contact with the seat.
• The ideal cleaning mixture is dishwashing soap and water. Rinse and dry with a soft cloth.
• Only connect the seat to a cold water supply of drinking quality at a pressure of 20 (139 kPa) – 80 psi (551 kPa).

TROUBLESHOOTING

inside.

Costumer Support

Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GACIER
HOMEDEPOT.COM/GLACIERBAY

References

• The Home Depot

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>