V I V O DESK-M051MB Black Compact Crank Height Adjustable Desk Frame Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
Black Compact Crank Height
Adjustable Desk Frame
SKU: DESK-M051MB
Instruction Manual
DESK-M051MB Black Compact Crank Height Adjustable Desk Frame
ASSEMBLY VIDEO AVAILABLE:
Follow along step-by-step with our video walk through by scanning the QR code
with your mobile device or by following the product link: vivo-
us.com/products/desk-m051mb
https://vivo- us.com/products/desk-m051mb
Contact Us First!
DO NOT RETURN ITEM
Our friendly product support team is here to help!
PERSONABLE CUSTOMER SUPPORT
7AM – 7PM
Monday-Friday
Give us a Call: 309-278-5303
Chat Us: www.vivo-us.com
Email Us: help@vivo-us.com
We’re Here for You!
Our customer-minded support team is here for YOU, Monday-Friday 7am-7pm CST.
We offer immediate assistance with rapid response times from customer service
agents and product techncians to help you every step of the way!
Missing a Part?
If any parts are received damaged / defective OR you are missing a part,
please reach out to us within 30 days of product delivery to have it replaced
at no cost.
We are happy to replace parts to ensure you have a fully functioning product
PRE-ASSEMBLY
BEFORE YOU BEGIN
If you do not understand these directions, or if you have any doubts about
the safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ELECTRICAL WARNING :
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
154lbs (70kg)
Product Warranty
For the most up to date details on your product’s warranty, please visit the
product’s listing on our website or reach out to customer support. vivo-
us.com/products/desk-m051mb
Returns | Product Didn’t Work Out?
We offer a hassle-free 30 day return on all products. Contact customer support
at 309-278-5303 or help@vivo-us.com. Please
note: For items ordered in error or no longer needed, the return shipping
charges will be at the buyer’s expense.
TOOLS NEEDED:
PACKAGE CONTENTS
Please consult the parts list below and ensure you have everything you need to assemble your product. If parts are missing or damaged, please contact us.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the worksurface. Failure
to follow these instructions may result in serious personal injury.
ASSEMBLY STEPS
STEP 1: Extend the Crossbar
Loosen the screws on Telescopic Crossbar (A) using 4mm Allen Wrench (T-B) and
extend the sides.
STEP 2: Install the Crossbar to Legs
Attach Telescopic Crossbar (A) to Leg (B) and Leg with Gearbox (C) using M6x25
mm Screws (S-A). Tighten with 4mm Allen Wrench (T-B).
STEP 3: Mount Side Brackets
Assemble Side Brackets (D) to the frame assembly using M6x10mm Screws (S-B)
and 5mm Allen Wrench (T-C).
STEP 4: Assemble Feet
Mount Feet (E) to Leg (B) and Leg with Gearbox (C) using M6x35mm Screws (S-C)
and 4mm Allen Wrench (T-B).
STEP 5: Adjust Frame Length
Extend Telescopic Crossbar (A) to fit the desktop. Retighten the screws on
Telscopic Crossbar (A) using 4mm Allen Wrench (T-B).
STEP 6: Attach Desktop
Secure the frame assembly to the desktop using ST4.2x16mm Screws (S-D) and a
Phillips screwdriver.
NOTE: If using the provided screws to secure your desktop, ensure the
desktop thickness is 3/4” (19mm) or greater.
STEP 7: Install the Sync Rod
Loosen the knob on Sync Rod (F) and insert the rod into Leg (B). Extend Sync
Rod (F) onto Leg With Gearbox (C). Tighten both knobs on Sync Rod (F) using
Wrench (T-D).
STEP 8: Mount the Crank
Loosen the set screw on Crank Handle Sync Rod (H) using 2.5mm Allen Wrench
(T-A) to extend the rod into Leg With Gearbox (C). Assemble Crank Handle (G)
to Crank Handle Sync Rod (H) making sure Crank Handle Sync Rod (H) sits inside
of the recess on the plastic mounting bracket on Crank Handle (G). Retighten
the set screw on Crank Handle Sync Rod (H).
NOTE: Leave at least 1.5” (40mm) of space from the mounting holes on
Crank Handle (G) to the edge of the desktop, which will allow the crank to be
fully pushed in.
STEP 9: Adjusting the Height
Turn Crank Handle (G) counter clockwise to raise the desk, and clockwise to
lower. Slide Crank Handle (G) in and flip the handle around to store it when
not in use.
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
We offer a wide array of home & office products to fit your needs. From height
adjustable desks to monitor mounts to keyboard trays and more!
| |
---|---|---
SPEAKER MOUNTS & STANDS
Whether you’re mounting a soundbar or surround sound system, we’ve got a
mounting solution to fit your needs| CABLE MANAGEMENT
From single monitor mounts to hex mount, gromment or clamp-ons,
we’ve got a mounting solution for your setup.| MONITOR MOUNTS
From single monitor mounts to hex mount, gromment or clamp-ons, we’ve got a
mounting solution for your setup.
https://qrco.de/bd7j84|
https://qrco.de/bd7j8W|
https://qrco.de/bd7j5o
WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of
creative and innovative indivuduals working together to offer high quality,
affordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilitiy.
Need Assistance?
We Would Love to
Help!
Personable Customer Support | Mon-Fri 7am-7pm
We offer immediate assistance with rapid response times from customer service
agents and product techncians to help you every step of the way!
Call Us: 309-278-5303
Average Resolution Time: 5m 4s
Chat Us: www.vivo-us.com
Average Resolution Time: < 15m
Email Us: h elp@vivo-us.com
Average Resolution Time: 1HR 8M
23% within < 15m
38% within < 30m
61% within < 1hr
83% within <2hr
92% within < 3hr
LOVE YOUR NEW VIVO SETUP?
Ready to share that new amazing
setup? Want to brag about that
amazing new ergonomic solution?
Tag us in your photo!
VIVO-us
@vivo_us
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT:WWW.VIVO-US.COM
LAST UPDATED: 06/22/2022
REV1LF
Documents / Resources
| V I
V O DESK-M051MB Black Compact Crank Height Adjustable Desk
Frame
[pdf] Instruction Manual
DESK-M051MB Black Compact Crank Height Adjustable Desk Frame, DESK-M051MB,
Black Compact Crank Height Adjustable Desk Frame, Height Adjustable Desk
Frame, Adjustable Desk Frame, Desk Frame, Frame
---|---
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Compact Crank Height Adjustable Desk Frame – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>