V I V O DESK-V001G Black 25 Inch Desk Riser Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
DESK-V001G Black 25 Inch Desk Riser
Instruction Manual
DESK-V001G Black 25 Inch Desk Riser
SKU: DESK-V001G
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. https://vivo-us.com/products
/desk-v001g
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
https://vivo-us.com/products/desk-v001g
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
Phillips Screwdriver
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut.
Pinch points are created during lifting and lowering the worksurface. Failure
to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove desk and contents from packaging and place on flat surface.
Desk (A) +must be raised. STEP 2
Attach Keyboard Tray Bracket (B) to Desk (A) with M6x16mm Screws (E), and
tighten with a Phillips screwdriver. STEP 3
Mount Keyboard Tray (C) to Keyboard Tray Bracket (B) using M5x12mm Screws
(D). STEP 4
Squeeze the handle on the right side, then raise or lower Desk (A) to desired
height. STEP 5
Place items on Desk (A) as desired. Please do not exceed weight limit of 17.6
lbs. STEP 6
If lock is not releasing properly to change desk height, adjust the position
of the black tube containing the steel release cable. Turn the nuts at the end
of the tube just behind the handle as shown below, moving the tube away from
the handle until the cable once again has proper tension, then tighten the
nuts. CAUTION!
Keep monitor and laptop base fully on the desktop.| Follow the cable routing
instructions to
avoid the potential to pinch cables.
Leave enough slack in cable to allow for
full range of vertical motion (16” / 41 cm).| Raise desktop slowly to keep
items stable.
Failure to follow these instructions may result in property damage and/or
personal injury.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
**** 309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 25" Standing Desk Converter – VIVO - desk solutions, screen mounting, and more