V I V O DESK-E-200B Black Electric Dual Motor Desk Frame Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

PACKAGE CONTENTS
ASSEMBLY STEPS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Black Electric Dual Motor Desk Frame
Instruction Manual

SKU: DESK-E-200B

https://vivo-us.com/products/desk-e-200b

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e-200b

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
OUTDOOR USE IS PROHIBITED.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the worksurface. Failure to follow these instructions may result in serious personal injury.

TOOLS NEEDED

ASSEMBLY STEPS

STEP 1
Insert Side Brackets (B) into Telescopic Crossbars (A).

STEP 2
Place Legs (C) on the frame assembly. Secure using M8x20 Screws (S-A) and 5mm Allen Wrench (T-A).

STEP 3
Assemble Feet (D) to Legs (C) using M6x35 Screws (S-B) and 5mm Allen Wrench (T-A).

STEP 4
Mount Adapter Support Bracket (E) to the frame assembly.

STEP 5
Place the frame assembly upside down on the desktop. Using 5mm Allen Wrench (T-A), loosen the set screws on the crossbars, adjust the frame length to fit the desktop, then retighten the set screws. We recommend that the desktop overhang on each side be no more than 10” (25cm).

STEP 6
If you are using a VIVO desktop, Refer to the manual that came with your desktop.
If you are not using a VIVO desktop, place the desktop on the frame, and secure the desktop using ST4.2×15 screws (S-C).

STEP 7
Mount Control Panel (G) to the desktop using ST4.2×15 Screws (S-C) and a Phillips screwdriver.

STEP 8
Connect Legs (C) to Control Panel (G). Plug Control Panel (G) into AC Adapter (F) and close the latch to secure the connection. Connect Power Cable (H) to AC Adapter (F).

STEP 9
Manage cables using Cable Clips (S-D).

STEP 10
Flip the desk assembly over and connect Power Cable (H) to a wall outlet to power on desk. Please follow reset procedure in the controller manual before operating the desk.

CAUTION!

| Do not exceed desk weight limit.
---|---
| Keep area of vertical motion free of obstacles.
| Keep weight on desk balanced for correct operation and longer life of components.
| Leave enough slack in cables to allow for full range of vertical motion.

Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 07/21/2022
REV1.2

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com