CONNECTA HEF666 Foldable Table Instruction Manual
- October 30, 2023
- CONNECTA
Table of Contents
CONNECTA HEF666 Foldable Table
Product Information
The Connecta Foldable Table is a portable work table that can be easily assembled and disassembled for convenience. The table comes in the following model:
- AX1
The table is designed with safety in mind, with all sharp edges removed. However, care must still be taken when handling or cleaning the table to avoid any risk of injury. Overloading the tabletop should also be avoided to prevent it from bending.
Product Usage Instructions
- Remove all packaging materials, including any loose parts that may have come loose during transportation.
- Place the table face down on the floor.
- Raise the legs with the shorter struts first, followed by the legs on the opposite side.
- Slide the joint locks over the joints to ensure they are securely in place and prevent the legs from collapsing.
- Stand the table upright and ensure all screws and nylock nuts are securely tightened.
- Remove all protective film, taking care to avoid scratching the surfaces. Adjust the feet if necessary to level the table.
Before using the table for the first time, it is recommended to clean it thoroughly with a suitable cleaning agent. All cleaning residues should be removed and the table should be dried thoroughly.
Cleaning and Maintenance
The Connecta Foldable Table should be regularly cleaned using a cleaning agent suitable for use with stainless steel. Any cleaning agent residue should be removed to avoid discoloration of the surface. The table surface should never be left damp as this can also cause discoloration.
Safety Tips
- Whilst all care has been taken to remove sharp edges, care must be taken when cleaning or handling the table to prevent the risk of injury from exposed metal edges.
- Do not overload the tabletop this may cause it to bend.
Pack Contents
- 1x Foldable Work Table
Assembly
Note: Be sure to check all packaging materials for any small parts that may have come loose during transportation
- Remove all packaging including all protective packing material from the foldable work table, avoiding scratching the surfaces.
- Place the table face down on the floor ○1
- Raise the legs with the shorter struts first, followed by the legs on the opposite side○2
- Slide the joint locks over the joints. Ensure they are securely in place to prevent the legs from collapsing ○3
- Stand the table upright and ensure all screws and nylock nuts are securely tightened.○4
- Remove all protective film, taking care to avoid scratching the surfaces.
Note: Adjust the feet if necessary, to level the table.
Before using for the first time, it is recommended that the table is cleaned thoroughly with a suitable cleaning agent, remove all cleaning residues and dry thoroughly.
Cleaning & Maintenance
- Clean the table regularly using a cleaning agent with stainless steel.
- Always remove cleaning agent residue, this can discolor the surface of the shelf.
- Never leave the shelf surface damp as this can cause discoloration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>