COOKe LEWIS CLBHS60 Black Glass Curved Cooker Hood Instruction Manual

: October 30, 2023
: COOKE LEWIS

Table of Contents

COOKe LEWIS CLBHS60 Black Glass Curved Cooker Hood
Product Information
Product Usage
Checking instructions
Safety
Installation
Technical data
Troubleshooting
Commercial guarantee
Recycling & disposal
Contacts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COOKe LEWIS CLBHS60 Black Glass Curved Cooker Hood

Product Information

The product is a T-shape Chimney Cooker Hood available in two sizes, 60cm and 90cm. The model numbers of the product are CLBHS60 and CLBHS90 respectively. The product is manufactured by FSS10339 and the barcode numbers are 3663602842576 (CLBHS60) and 3663602842514 (CLBHS90). The product manual contains important safety instructions that must be read carefully before installation and use of the product. The product is electrically operated and requires installation by a qualified person in accordance with local building regulations and the instructions provided.

Product Usage

Before installation, ensure that the product is not damaged. If there is any doubt, do not use the appliance but contact Customer Services on 0800 324 7818 (UK) and 1800 932 230 (Eire).
Ensure that the correct fixings suitable for the substrate where the appliance will be installed are being used and they are able to support the weight of the appliance.
Use only the same size of fittings and mounting screws as recommended in the instruction manual. Failure to follow these instructions may result in electrical hazards.
Switch off the appliance at the mains supply before carrying out any maintenance work or cleaning.
Ensure that young children are kept away from the appliance as accessible parts may become hot when used with cooking appliances. Care should be taken to avoid touching the appliance. Filter regularly and closely monitor pans containing hot oil.
Means for full disconnection must be incorporated in the fixed wiring in accordance with the local wiring installation rules for your country. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected during installation.
When the extractor hood is located above an appliance, the minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the hood shall be at least 760mm.
Before connecting the hood, check that the supplied voltage and frequency match with that indicated on the appliance rating plate. Failure to install the appliance in accordance with these instructions may result in a safety hazard. If in doubt, ask for advice instore or from a qualified installer.
Consult local regulations regarding extraction outlets and ensure these are complied with. Do not connect the hood to a ventilation or hot air duct containing combustion fumes from burning gas or other fuels. Confirm that room ventilation is appropriate with the local authorities.
In case of electrostatic discharge (e.g. lightning), the hood may stop working. This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.

Checking instructions

These instructions are for your safety. Please read the following instructions carefully before proceeding with the installation and use of this appliance.

WARNING: All installation work must be carried out by a suitably qualified person, strictly following local building regulations and these instructions.

To avoid the risks that are always present when you use an electrical appliance it is important that this cooker hood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. After unpacking the cooker hood please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services on 0800 324 7818 (UK) and 1800 932 230 (Eire). Check the package and make sure you have all of the parts listed and decide upon the appropriate location for your product. If this product contains glass please take care with fitting or handling to prevent personal injury or damage to the product. The specification plate shown on this appliance displays all the necessary identification information for ordering replacement parts. If you sell the appliance, give it away, or leave it behind when you move house, please ensure that you pass on this manual so that the new owner can become familiar with the appliance and its safety warnings.

Safety

WARNING

There is a risk of electric shock and fire if cleaning is not carried out in accordance with these instructions.
Where applicable, this appliance is supplied with fixings. Please ensure you use the correct fixings suitable for the substrate where the appliance will be installed and that they are able to support the weight of the appliance.
Use only the same size of fittings and mounting screws as recommended in this instruction manual. Failure to follow these instructions may result in electrical hazards.
Switch off the appliance at the mains supply before carrying out any maintenance work or cleaning.
Accessible parts may become hot when used with cooking appliances. Young children should be kept away. Care should be taken to avoid touching the appliance.
Do not flambé under the hood. To avoid the risk of fire, clean or replace the grease filter regularly and closely monitor pans containing hot oil.
Means for full disconnection must be incorporated in the fixed wiring in accordance with the local wiring installation rules for your country. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected during installation.
When the extractor hood is located above an appliance, the minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the hood shall be at least 760mm.
Before connecting the hood, check that the supplied voltage and frequency match with that indicated on the appliance rating plate. Failure to install the appliance in accordance with these instructions may result in a safety hazard. If in doubt, ask for advice instore or from a qualified installer.
Consult local regulations regarding extraction outlets and ensure these are complied with. Do not connect the hood to a ventilation or hot air duct containing combustion fumes from burning gas or other fuels. Confirm that room ventilation is appropriate with the local authorities.
The hood may stop working during an electrostatic discharge (e.g. lightning). This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its supply cord out of the reach of children less than 8 years old.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard.
Do not install the appliance outdoors in a damp place or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak affecting the appliance, do not use and contact customer services to arrange for inspection.
Do not use flammable sprays in close vicinity to the appliance.
Please dispose of the packing material carefully. There is a fire risk if cleaning is not carried out in accordance with the instructions. Refer to the Care and Maintenance sections carefully for details on how to clean and replace the aluminium and carbon filters (if fitted).
Refer to the Care and Maintenance section for details on the type of lamps that can be used and how to replace them.
Do not use a steam cleaner for care and maintenance.
The appliance is not intended to be operated by means of an external timer or separate remote control system.
There shall be adequate ventilation of the room when the hood is used at the same time as appliances burning gas or other fuels. Ensure that the negative pressure of the installation site does not exceed 4 Pa (0.04 mbar) to ensure combustion fumes are not drawn back into the room.
Do not use the hood if it shows signs of damage or imperfection. Contact customer services for assistance.
The manufacturer declines all liability for personal or material damage as a result of misuse or incorrect installation of this appliance.
The appliance is for domestic use only as an extractor hood.

Installation

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate. Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed.

This appliance is supplied with a 3-core mains cable coloured as follows:

Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth

The fuse must be rated at 3 Amps

To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your own safety a qualified electrician or contractor should undertake the electrical installation.
The appliance is supplied from the factory to use external ducting (not supplied). Should you wish to use this in recirculation mode only, please fit the correct carbon filter (not supplied).

Technical data

Supply voltage	220-240V~, 50Hz
Power consumption – Fan	100W
Power consumption – Luminary	2 x 1.5W Max
Power consumption – Total	103W
Protection class	I
Light bulb	2 x 1.5W Max
ILCOSD Code	DBR-1.5-S-68

Information for EU No. 66/2014 and No. 65/2014

Information of the cooker hood (www.diy.com)

	Symbol	Value	Unit
Model Identification	CLBHS60 / CLBHS90
Annual Energy Consumption	AEC

hood

| 36.3| KWh/a
Time increase factor| f| 1.5|
Fluid Dynamic Efficiency| FDE

hood

| 12.8|
Energy Efficiency Index| EEI

hood

| 70.9|
---|---|---|---
Measured air flow rate at best efficiency point| Q

BEP

| 304.9| M3/h
Measured air pressure at best efficiency point| P

BEP

| 94| PA
Maximum air flow| Q

MAX

BEP

| 62.3| W
Nominal power of the lighting system| W

L

| 3| W
Average illumination of the lighting system on the cooking surface| E

middle

| ****

79 / 72

| ****

lux

Lighting Efficiency| LE

hood

| 26.5 / 23.9| lux/watt
Measured power consumption in standby mode| P

s

| ****

–

| ****

W

Measured power consumption off mode| P

o

| 0.42| W
Sound power level| L

WA

| Max.62/ Min.56| dB
Grease Filtering Efficiency| GFE

hood

| 81.0 / 78.5| %

The measurement and calculation method of the above table was done in accordance with Commission Delegated Regulation (EU) No 65/2014 & Commission Regulation (EU) No 66/2014.

The following shows how to reduce total environmental impact (e.g. energy use) of the cooking process.

Install the cooker hood in a proper place where there is efficient ventilation.
Clean the cooker hood regularly so as not to block the airway.
Remember to switch off the cooker hood light after cooking.
Remember to switch off the cooker hood after cooking.

Information for dismantling

This appliance cannot be dismantled by the user, other than that as shown in the original assembly of the user manual.
At the end of its useful life, the appliance should not be disposed of with household waste. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice.

Troubleshooting

Problem	Possible cause	Solution
Excessive vibration.	The appliance is not installed properly on the
brackets.	Take down the appliance and check it is properly fixed.
The fan blade is damaged.

Switch off the appliance. Repair to be carried out by qualified service personnel only.

The fan motor is not fixed tightly.
The light is on, but the fan does not work.| The fan blade is jammed.
The motor is damaged.
Both the light and motor do not work.| Light bulb blown.| Replace with a bulb of the correct rating.
Power connection loose.| Check power supply.
Suction

performance reduced.

| Speed may be too low.| Select a higher speed.
Aluminium filters are dirty.| Clean the aluminium filters. (See Care and maintenance section).
Top vent might be obstructed.| Clear any obstruction.
Optional vent kit might be twisted.| Ensure that the vent kit is fitted according to the

manufacturer’s instructions.

The installation may not comply with the manufacturers instructions.| The vent hose should be correct diameter throughout with no reductions or restriction.(See installation section).
Works normally but

cooking smells linger.

| Carbon filter is not fitted in recirculation mode or is full of grease.| Fit carbon filter or replace the carbon filter (See Care and maintenance section).

This appliance respects laws of the suppression of radio interference. As the Manufacturer has a policy of continuous product improvement, it reserves the right to adapt and carry out any modification considered necessary without prior warning. Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom.

Commercial guarantee

At Cooke and Lewis we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 24 months’ guarantee against manufacturing defects on our box hood. This box hood is guaranteed for 24 months from the date of purchase, if bought in store, or delivery, if bought online, for normal (non-professional or commercial) household use. You may only make a claim under this guarantee upon presentation of your sales receipt or purchase invoice. Please keep your proof of purchase in a safe place.

The guarantee covers all parts and labour costs associated with the repair of the box hood if it is found to be defective due to faulty materials or workmanship within 24 months from the date of purchase or delivery subject to the exclusions set out below and provided it was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in the user manual. This guarantee does not cover defects and damage caused by normal wear and tear of box hood and damage that could be the result of improper use, faulty installation, storage or assembly, neglect, accident, modification of the product, consumable items such as carbon filters and bulbs.

If the box hood is defective, we will repair it. However, if, during the guarantee period, the box hood becomes irreparable as agreed by an engineer approved by our authorised agent then we reserve the right, at our discretion, to exchange the defective box hood with a replacement box hood. If the same box hood is no longer available an alternative box hood will be offered with the equivalent functions and specifications. During the service work carried out it may be necessary to remove the built in box hood from its fitted position. If the box hood is glued, grouted or tiled in such a manner that it cannot be removed, it is the responsibility of the customer/installer to remove and reinstall the box hood to facilitate the repair or replacement.

After the box hood has been repaired or replaced any remaining balance of the guarantee period will apply to the repaired or replaced box hood. Should any person other than an engineer approved by our authorised agent modify or attempt to repair the box hood then the guarantee will be invalid. This guarantee only applies to the country of purchase or delivery and is not transferrable to any other countries. This guarantee is nontransferable to any other person or product. Relevant local law will apply to this guarantee. This guarantee is in addition to and does not affect your statutory rights relating to faulty goods as a consumer. Guarantee related queries should be addressed to a store affiliated with the distributor you purchased the box hood from.

To arrange a service call, please contact our customer services on one of the following Toll Free numbers, you must contact the number in the country in which you purchased the box hood:

UK 0800 324 7818 uk@kingfisherservice.com
Eire 1800 932 230 eire@kingfisherservice.com
Distributor: B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com SFD Limited, Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom

Recycling & disposal

Waste electrical products (WEEE) should not be disposed of with household waste. Please recycle where facilities exist. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice. The wheelie bin symbol on the product or its packaging indicates that this product cannot be treated as normal household waste. This product must be handed over to an electric and electronic equipment collection point for recycling. On ensuring that this product is disposed of correctly, you will help to avoid possible negative consequences for the environment and public health, which could occur if this product is not handled correctly.