QUINEAR QN-021A Air Compression Leg Massager With Heat Instruction Manual
- June 14, 2024
- QUINEAR
Table of Contents
Air Compression Leg
Massager with Heat
Model: QN-021A OPERATING INSTRUCTIONS
Thanks for purchasing our product. Please read the instructions carefully prior to the Use and keep it well for further reference.
Safety Precautions
Warnings
- Those with any of the following conditions or persons who are receiving medical treatment should consult the doctor before using the machine:
- Using pacemaker or other medical devices which are susceptible to electrical interference;
- Suffering from malignant tumors;
- Suffering from cardiac diseases;
- Having serious peripheral neuropathy dysfunction or sensory disturbance caused by diabetes;
- Being unsuitable to do the massage because of traumas on the badly;
- Keep it out of the reach of infants, children and people without the agility to use it independently.
- Don’t use other power adapter but the original one.
- Don’t scratch, damage, process, excessively bend, pull or twist the power cord of power adapter. Otherwise, it may cause fire or electric shock.
- It is not allowed to use when the power adapter dysfunctions or the plug is loose.
- Don’t plug or unplug the power adapter with wet hands.
- Don’t put the controller in the quilt or use the machine in high temperature condition.
- It is forbidden to remodel, disassemble or repair the machine without permission.
Cautions
- Stop using it immediately if you feel unwell. Don’t use it again before consult the doctor.
- Don’t use it in bathroom or other humid places.
- Unplug the power adapter from the socket before you clean and maintain it.
- Unplug the power adapter when you are not using it.
- Don’t walk around when you are using this item or wearing the wraps.
FAQs
Qt: How does this product massage?
Al: There are 2+2 airbags inside. It will be inflated and deflated to simulate
kneading and stroking of tissues like human hands. It can relax our muscles,
increase circulation and relieve pain.
Q2: How many massage modes, and what’s the difference?
A2: There are 3 massage modes.
Mode 1: Sequence Mode
In this mode, sleeves will be inflated and deflated from lower to
upper. Mode 2: Circulation Mode,
In this mode, sleeves will be inflated and deflated circularly from lower to
upper.
Mode 3: Whole Mode,
In this mode, sleeves will be inflated and deflated simultaneously and wholly.
Q3: Why can’t| feel the heat?
A3: The heating function is off by default. You can press the “Heat” button to
tum it on and wait for 3-5 minutes. Please make sure both 2 airholes are
inserted into the controller correctly and completely.
Q4: What should do if feel the temperature is too hot?
Ad4: Please se the lower temperature or turn it off. We suggest you wear
trousers if necessary.
Q5: What should do if feel the massage strength is too light or too
tight?
AS5: There are 3 levels of massage strength selectable via the controller,
please select the intensity which s fit for you. You can also adjust the
strength via changing the tightness of Velcro on the wraps
Q6: Why does it not work when press the button?
AB: Please ensure both 2 air hoses are inserted into the controller,
otherwise, it will not work.
Q7: How long should we use it?
A7: We suggest you use 1-2 times everyday, and 20 minutes per time. You can
also use it for long time if you feel too tired or want to continue to enjoy.
Q8: Why does the controller get hot?
A8: As we suggest you can use it 20 minutes per time normally. If it keeps
working too long time, the controller will get hot, it’s a normal phenomenon
Q9: Why does the controller make sound?
A9: The sound comes from the working air pump in the controller, providing air
continuously to the airbags in the wraps, it’s normal phenomenon.
Q10:What should do if have bigger calves?
AT0: For bigger calves, please use the extensions included to expand the size
of the wraps.
Q11: what should do if have bigger feet?
Al1: For bigger feet, please unbutton the top of toes part
Troubleshooting
Problems | Causes & Solutions |
---|---|
1. The product does not work, and the indicator light is off. | Make sure the |
power adapter is connected well and press the power button of the controller.
2. The product does not work, but the indicator light is on.| 1. It works
only when 2 air hoses are connected to the controller.
2. Please check if the air hoses are inserted correctly, (see “UP” mark)
3. Sudden interruption of operation.| 1. the power adapter or air hoses fall
off;
2. the massager works after 20 minutes and shut off automatic-911y;
4. Too light or tight.| 1. 7bere are three massage levels for you to choose:
2. You can adjust the width of the strap to make the strength suitable;
3. Turn off the machine if you cannot bear the strength.
5. The controller gets hot.| It is normal if the controller gets hot after
too long time use. We suggest you shut it down for 10 minutes.
Names of Component
Usage
Cautions: Please read safety precautions carefully before using the product. In order to get better massage, please wear the sleeves properly.
-
Make sure the inner cover is attached property.
-
Wear the wraps on your legs correctly.
-
Fix all the velcro according to your size, don’t wrap too tight. (Use the Extensions for bigger calves)
-
Plug the power adapter into the controller and socket on each side.
-
Insert two air hose plugs into the controller correctly and completely.
-
Take Up the controller and press the on-off bitten to start the machine.
• It will begin with mode 1and strength 1 (The lowest) by deficit.
• It will shut off after 20 minutes (You can restart it manually).
• The heat function is off by defat, you can start it via “Heat” button, 2 heating levels selectable, you can also close t if you do not need. -
Press “Mode’ to switch and enjoy the different massage modes, the difference between these 3 modes can be seen on Page 3
-
Press “Air Pressure” button to select intensity.
- Three pressure levels for choice. We suggest you use the lowest level at the beginning
- You can change the tightness of the warps to meek the strength suitable as you like.
-
Press on-off button to tum it off. Wamings: ‘We suggest 20mins each time as the best. After 20-minute work it will shut down automatically but you can restart it.
-
Unplug the power adapter from the socket.
-
Pull out the plugs of the power adapter and air hoses from the bottom of the controller
-
Take off the wraps, fold it into the storage bag or box.
Cleaning
Make sure to cut off the power when you clean the machine.
- If Dirty, please wipe the controller, wraps and hoses with a soft cloth moistened by soap solution.
- Don’t use gasoline, alcohol, diluent and other stating liquidly to wipe the machine in case it causes malfunction or the components are damaged or discolored.
- Don’t allow foreign matters to enter the hoses.
- Toothpicks can be used to remove the hair or chippings attached on the Velcro’s,
Storage
- Keep it out of the reach of chidden.
- Don’t dissemble the machine by yourself.
- Don’t place it in high temperature and humidity condition
- Avoid direct sunlight.
- Avoid needles puncture the air bags and hoses.
- Don’t place heavy stuff on it
Disposal
Please adhere to the local regulations when you dispose of the wasted
Package Included
- 2 x Leg Massager Wraps
- 1 Handheld Controller
- 1x Power Adapter/ DC12V 3A
- 1x User Manual
- 1x Quick-Start Guide
- 2 x Extensions
- 1x Portable Storage Bag
Specifications
Model | QN-021A |
---|---|
Name | Air Compression Leg Massager with Heat |
AC/DC Adapter | AC Input: 100-240 Volts, AC 50/60Hz, DC Output 12V 3A |
Rated Power | 36W |
Operating Conditions | Temperature: +5°C to 40°C (41°F to 104°F) Humidity : 1% |
to 90% non-condensing Atmospheric Pressure : 70 kPa to 106 kPa
Storage Conditions| Temperature. -20°C to 55°C Humidity : 5% to 90% non-
condensing Atmospheric Pressure . 50 kPa to 106 kPa
Keep dry and avoid direct sunlight exposure.
Contact us
if you have any problem during using of this product, please feel free to
contact us. Our professional customer service term will help you
- Service Email: service@quinear-ec.com
Notes: Please write the order number together with the problems you meet in the mail.
|
---|---
https://www.facebook.com/Quinear-101205534587390/| http://www.quinear-
ec.com
Shenzhen Quinear Electronic Commerce Co., Ltd.
Add: Building 3, Tiananyungu Industrial Park, Xuegang
Rd.,Bantian Street, Longgang District, Shenzhen, China
Web: www.quinear-ec.com
E mail: service@quinear-ec.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>