Dupad Story G20S Pro 2.4G Wireless Voice Air Mouse Instruction Manual
- June 6, 2024
- Dupad Story
Table of Contents
Dupad Story G20S Pro 2.4G Wireless Voice Air Mouse Instruction Manual
Introduction
Thank you for using our products ever since! This is a voice air mouse with built-in 6-axis gyroscope sensor and high fidelity voice Microphone. It can realize the functions of traditional remote control, mouse and motion sensing game on Android platform. Plug and play micro receiver for computers, projectors, TV set-top boxes, HTPC, etc
It can completely liberate you from the computer, TV, projection and other entertainment equipment, only need to flex your wrist, the direction of your wrist will be converted into the cursor on the screen.
Feel comfortable, convenient, completely avoid the traditional mouse needs drawbacks to the stationary desktop for reference operation or infrared remote control button operation, let you lie playing computer, TV is not tired, casual, completely “control” your computer, TV.
Product Diagram
Product features
High quality voice input
Built in 6-axis gyroscope
Low battery auto reminder
Laser carving white backlit
Two key infrared Programming
Multimedia control shortcut key
How to use the IR Programming
The operation steps of infrared programming are as follows: (take learning the power button on the infrared remote control as an example)
- Press and hold the [power] button of this product for 3 seconds. When the indicator light flashes slowly, prompt to enter the IR programming mode.
- Position this product and your TV remote head-to-head on a flat surface with 1 inch apart, press the [power] button of your IR remote control, then The indicator light will go out after flashing, indicating that the infrared programming is completed.
- There are two buttons [power] and [mute] can be used infrared programed for this product, and the programming operation can refer to steps 1-2.
Press and hold the [Power] + [Del] buttons for 5 seconds, The indicator light flashes to prompt restore to the factory settings.
How to Change the Cursor Speed
Please hold [OK] button and then click , You will get a slower speed successfully when the LED light changes from blink to solid.
Please hold [OK] button and then click , You will get a faster speed successfully when the LED light changes from blink to solid.
Backlight function
After the battery is installed, the backlight function is automatically turned
on. Long press the button to turn off/on the backlight.
How to use the voice function
Press and hold Voice Switch” to turn on voice channel.
Release to turn off voice channel.
Low battery reminder:
The red light Dashes slowly when the AAA battery power of the product is lower
than 2V. It means that the battery need to be replaced at this time.
Sensor Calibration
Automatic calibration:
when the device works, the cursor may drift due to changes in voltage and
temperature. Please place the device on flat desktop and keep it still. After
the device turns into quiescent mode, wake up again to complete calibration.
Manual calibration:
press and hold the [OK] button and install the battery at the same time. After
the green LED light turns from flashing to normally on, place the product flat
on the desktop and wait for the indicator to turn to flashing, then complete
the manual calibration.
About voice search:
Please refer to the steps in this picture to install [Google Chrome] from the
[Google play store] . If the installation still fails to start normally,
please continue to install [Google play services] . When starting [Google
assistant] , please set the device to allow Google to record audio and allow
app permissions.
How to Use
For initial use, plug a USB receiver into the USB port of device and wait for 20-60 seconds to install driver of USB receiver. Move the mouse, the mouse cursor can move on the screen means that pairing is successful. If it is unsuccessful, press and hold [OK] and [BACK) buttons, LED light begin to flash. Pairing is successful when LED light stop flashing.
Product specifications
- Transmission method: 2.4G
- RF wireless Sensors: 6 axis
- Gyroscope Number of keys: 30 Range: >10m
- Battery Type: AAA*2
- Material: ABS
- Plastic and silicone
- Size: 1604218MM
- Weight: 55g
Note:
-
Air mouse functions:
Some multi-media device maybe is not available for air mouse, so if the key [OK] doesn’t work during device working, please end close air mouse pointer and try again. -
Infrared transmission program:
2 keys of infrared program can be available for many popular television, voice devices and A/V receiver, but it is not suitable for all kinds of brands and items. As some remote control cannot be infrared programmed due to Bluetooth or wireless radio frequency technology. Or as the infrared remote control may use an unusual/unique infrared code number, in this case, we cannot program successfully. -
Battery power:
Please make sure that the battery is sufficiently charged. When the battery is low, the brightness of the backlit and the stability of the air mouse cursor will be affected. -
Space under work
The actual space of this device will be affected by the electronic magnetic field. Please make sure that there is no electromagnetic interference in the working space.