CarpodGo T3 Pro Portable 60fps Wireless Carplay Android Auto User Manual

CarpodGoT3 Pro Portable 60fps Wireless Carplay Android Auto

Specifications

• Full lamination screen : Yes
• Bluetooth stereo playback support in the car : Yes
• Support for changing songs via steering wheel buttons: Yes
• Mounting brackets: Small bracket with dual-ball head and suction cup bracket
• Startup screen with built-in car model logos: Yes, logos for over 95% of popular car models
• Power source : Device powered
• Multi-touch support: Yes, except for Apple CarPlay and Android Auto
• CPU: Detailed information not provided
• Light sensor: Yes, sensitivity not specified
• Magnetic attachment stability: Can withstand up to 8KG vertical pressure
• Support for AirPlay : Information not provided

Product Accessories

Standard Accessories in the Box

Complimentary

Suction cup mount (for console glass only)

Optional Accessories Not Included in the Box
Suction Cup Bluetooth Aux Receiver Bluetooth FM Transmitter

• Suction Cup : Mount
• Buetooth Aux Receiver: (Add Bluetooth to the car)
• Bluetooth FM Transmitter: (Add Bluetooth to the car)

The illustrations of products, accessories, and user interfaces in the manual are for reference only. Due to product updates and upgrades, the actual product may differ slightly from the illustrations.
Please refer to the actual product. (Different purchasing channels may include optional accessories as gifts, but the standard accessories are the same.

• Small Bracket Mounting
• Glass Suction Cup Mounting
• Special Mount for Tesla
  (older models 3/Y)

Connect to Car Audio

80% of users
Display Only Bluetooth Mode.
19% of users use
Display Only Mode + AUX Bluetooth Receiver
Display Only Mode + FM Bluetooth Receiver
1% of users use
AUX Cable Connection
FM Output
Speaker

In Display Only Bluetooth Mode, the screen no longer participates in the audio. All audio is controlled by the phone, which can simul
Itaneously connects to the car’s Bluetooth for audio playback and supports the car’s multifunction steering wheel buttons and microphone. In this mode, the phone can also connect to an installed aux Bluetooth receiver or FM Bluetooth receiver.

Compared to the setup where the phone connects to the screen and the screen transmits audio to the car speakers via aux cable or FM, Display Only Bluetooth Mode offers lower latency and more stable sound quality.
Since wireless CarPlay connections to the screen do not support lossless audio formats, audio via the screen’s aux connection to the car is not lossless. The true lossless audio playback method is in Display Only Bluetooth Mode, where the phone connects directly to the car’s audio system via an aux cable. (Note: phone aux cable connection to the car requires using speakerphone for calls.)

Connect to Wireless CarPlay or Android Auto

• Step1: Open the Bluetooth interface on your phone.
• Step2: Search for the product’s Bluetooth name”PND_XXXX.”
• Step3: Pair and connect to the Bluetooth.
• Step4: Allow the CarPlay or Android Auto prompt that appear on your phone.

(Note: The principle of wireless CarPlay or Android Auto connection is that after

• Bluetooth pairing, a Wi-Fi local network is automatically created and connected.
• On your phone, you only need to connect via Bluetooth pairing; do not manually try to connect to Wi-Fi, as this will occupy the Wi-Fi channel.)

Reconnection Method One

• Step 2 : On your phone, go to Bluetooth > PND_XXXX > Forget This Device.
• Step3: Restart your phone.
• Step4 : Reconnect your phone to Bluetooth PND_XXXX.

Reconnection Method Two
Stepl: Check pit it sii connected as shown) > Delete this Wi-Fi.

Step2:

• Follow the steps in
• Reconnection Method One.

Reconnection Method Three

Step1: Check if Siri or Wi-Fi is not enabled on your phone.
Step2:

• Follow the steps in
• Reconnection Method One.

System Firmware Upgrade

1. Prepare a USB drive with a capacity of 64GB or less and format it to FAT32. (You can also use a memory card with a card reader instead of a USB drive.)
2. Extract the upgrade software to obtain three files (as shown).
3. 3. Place these three files on an empty USB drive (the empty USB drive is also referred to as the root directory), and insert the USB drive into the screen’s USB port using an OTG adapter.
4. 4. Go to Settings > About > Upgrade Scan, and when prompted, the firmware will automatically update.

(The screen will display the progress bar status indicating a successful upgrade. After the upgrade is complete, check for the version number change. Note: If the device keeps restarting during the upgrade, it indicates that the created USB drive files or USB drive driver are not compatible, causing the screen to stay on the firmware scanning step. It is recommended to use a different USB drive to recreate the upgrade firmware and insert it into the device, which will autom- atically scan and update.)

Carpodgo exterior specifications

Product Six Perspective Diagram

• Product name : CarpodGo
• Product Model: T3 Series
• Operating System: Linux
• Processor: T113
• RAM : 125/256MB
• Storage: EMMC

Screen

• Aspect Ratio : 16:6
• Resolution: 1920×720
• Screen Brightness: 700nit
• Technology: Full Lamination
• Colour Depth: 16.7 million colours
• Colour Gamut: 72%NTSC
• Screen Type: IPS
• Screen Size: 8.9 inches
• PPI: 230

Sound Output

• Display-Only Bluetooth Mode
• Speaker
• AUX Output
• FM Audio Transmission
• Rear View Camera: M1080Р
• Weight: Main Unit: 397g
• Wi-Fi : 5GHz Dual-Band Wi-Fi
  • Magnetic Mount: 47g
  • Suction Cup Ball Head Mount: 111g
• Bluetooth: Bluetooth 5.0
• Mounting Method: Magnetic/17mm Ball Head Mount
• Rated Input: 9V/1.5;USB-C(PD protocol)
• Power Connector: Type-C, Supports PD Protocol

Dimensions

• Length: 227mm
• Width: 101mm
• Thickness: 19mm

Reversing Camera Installation

Rear camera wiring routing recommendations.

1. Mount rear camera inside windshield
2. Mount rear camera above rear license plate light.

Reversing Camera Wiring

Frequently Asked Questions

• Q: No response from the reverse camera after shifting into reverse.

  • A: Ensure that both the power supply to the screen and the power supply conn ected to the reverse light are from the same main power source. They need to be in the same power system to form a circuit and trigger the reverse camera.
    Check if the 12V trigger wire is correctly connected to the positive terminal of the reverse light and if there is a 12V current at the positive terminal of the reverse light.

• Q: White screen on the reverse camera after shifting into reverse.

  • A: A white screen usually indicates insufficient power supply voltage. Confirm if you are using the standard power cable provided by us. Please test with our standard power cable.

• Q: Flashing or black screen on the reverse camera after shifting into reverse.

  • A: This situation indicates that the 12V voltage or current of the reverse light is unstable, with pulse signal interference.
  • A voltage stabilizer is needed to filter the current pulse signal and maintain a stable 12V voltage signal to the reverse light.

Further learn about setting up and using CarpodGo
Please visit www.carpodgo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>