Solplanet Ai-HB 050A Scalable Storage Solution Installation Guide
- October 30, 2023
- solplanet
Table of Contents
Ai-HB 050A/ Ai-HB 075A/
Ai-HB 100A/Ai-HB 125A/
Ai-HB 150A / Ai-HB 175A /Ai-HB 200A
Ai-HB G2 Series Battery
Quick Installation Guidehttps://play.google.com/store/apps/details?id=com.aiswei.international
https://apps.apple.com/us/app/ai-energy/id1607454432
GENERAL INFORMATION
This quick installation guide does not replace the description in the user
manual.
The contents of this guide may be updated or revised due to product
development.
The information in this guide is subject to change without notice. The latest
version of this document and the manual for installation, commissioning,
configuration and decommissioning are to be found in PDF format at
www.solplanet.net.
SAFETY
2.1 Intended use
The product is a battery system for residential and works with the solar
hybrid inverters. It is a high voltage Li-ion battery storage system that has
its own control unit. It can be operated in on-grid, off-grid and backup modes
with all the compatible inverters.
The product is suitable for indoor and outdoor use.
The product must only be operated with the inverters which are claimed by
AISWEI.
The inverters must be compatible with this product.
The battery system must only be used as stationary equipment.
Alterations to the product are not allowed unless the written permission of
AiSWEI is achieved. Unauthorized alterations will void the guarantee and
warranty claims.
AiSWEI will not be held liable for any damage caused by such illegal changes.
The product is not suitable for supplying life-sustaining medical devices.
Please ensure that no personal injury would lead due to the power outage of
the battery system.
The product must only be used in countries for which it is approved or
released by AISWEI and the grid operator.
Use this product only in accordance with the information provided in this
documentation and with the locally applicable standards and directives.
Any other application may cause personal injury or property damage.
The type label must remain permanently attached to the product.
This document does not replace any regional, state, provincial, federal or
national laws, regulations or standards that apply to the installation,
electrical safety and use of the product.
2.2 Important safety instructions
The product has been designed and tested in accordance with international
safety requirements. As with all electrical or electronical devices, there are
residual risks despite careful construction. To prevent personal injury and
property damage and to ensure long term operation of the product, read this
section carefully and observe all safety information at all times.
DANGER
Danger to life due to high voltage of the battery ！
When the battery system connected to the inverter, and the breaker is closed,
the batteries generate high DC voltage which is present in the DC cable and
live components.
- Do not touch non-insulated parts or cables.
- Do not touch the DC conductors.
- Do not touch any live components of the product.
- Do not open the product.
- All work on the product must only be carried out by qualified personnel who have read and fully understood all safety information contained in this document.
- Disconnect the product from voltage sources and ensure it cannot be reconnected before working on the product.
- Wear suitable personal protective equipment for all work on the product.
- Make sure the circuit breaker is off before assembly.
WARNING
Danger to life due to electric shock from destruction of the measuring device
due to overvoltage ！
Overvoltage can damage a measuring device and result in voltage being present
in the enclosure of the measuring device. Touching the live enclosure of the
measuring device results in death or lethal injuries due to electric shock.
- Only use measuring devices with a higher volatge range than the battery voltage.
WARNING
Risk of injury due to weight of product ！
Injuries may result if the product is lifted incorrectly or dropped while
being transported or mounted.
- Transport and lift the product carefully. Take the weight of the product into account.
- Qualified persons wear appropriate personal protective equipment.
NOTICE
Damage to the battery system due to electrostatic discharge
Internal components of the battery system can be irreparably damaged by
electrostatic discharge.
- Ground yourself before touching any component.
NOTICE
Damage to BCU due to pollutants
The pollutants (e.g. sand, dust, moisture) can damage the BCU and impair its
functionality.
- Only open the BCU cover when the humidity is within the permitted range of the product and the environment is free of dust and sand.
2.3 Symbols on the label
| Beware of a danger zone!
This symbol indicates that the product must be additionally grounded if
additional grounding or equipotential bonding is required at the installation
site.
---|---
| Beware of high voltage and operating current ！
The product operates at high voltage and current. Work on the product must
only be carried out by skilled and authorized electricians.
| Beware of explosion!
The battery is an electro chemical, and there is an explosion risk in extreme
cases. Please keep away of it when the danger occurs.
| Beware of danger for children!
Keep the battery system away of the children.
| Beware of danger with flam!
Keep the battery system away of the open flam or ignition sources.
| WEEE designation
Do not dispose of the product together with the household waste but in
accordance with the disposal regulations for electronic waste applicable at
the installation site.
| CE marking
The product complies with the requirements of the applicable EU directives.
| Certification mark
The product has been tested by TUV and got the quality certification mark.
| RCM Mark
The product complies with the requirements of the applicable Australian
standards.
| The battery is recyclable
After the battery marked lifetime is use out, the battery can be recycled by
the professional recycling organization and do not discardit.
| Observe the documentation
Observe all documentation supplied with the product.
PARALLEL SYSTEM WIRING DIAGRAM
EU DECLARATION OF CONFORMITY
Within the scope of the EU directives:
-Electromagnetic compatibility directive 2014/30/EU
(L 96/79-106, March 29, 2014)(EMC)
-Low voltage directive 2014/35/EU (L 96/357-374, March 29, 2014)(LVD)
Restriction of the use of certain hazardous substances 2011/65/EU
(L 174/88, June 8, 2011) and 2015/863/EU (L 137/10, March 31,2015) (RoHS)
AISWEI New Energy Technology (Yangzhong) Co., Ltd. confirms herewith that the
products described in this document are in compliance with the fundamental
requirements and other relevant provisions of the above mentioned directives.
The entire EU Declaration of Conformity can be found at
www.solplanet.net.
OVERVIEW
| Object | Description |
|---|---|
| 1 | Battery control unit(BCU) |
| 2 | Battery Module |
| 3 | Battery Module |
| 4 | Base |
| 5 | SOC Light |
| 6 | Circuit Breaker |
| 7 | Link port out |
| 8 | Link port in |
| On/off | |
| 9 | P- |
| 10 | P+ |
| 11 | Grounding |
SCOPE OF DELIVERY
6.1 BCU and Base Package
6.2 Battery Module Package
MOUNTING ENVIRONMENT
DIMENSIONS
MOUNTING
BATTERY CONNECTION
CONTACT
Please contact our Service Department if you have any technical questions
about our products.
The following information is needed to provide necessary assistance:
- Battery model
- Battery control unit and module series number
- Fault code
- Installation location
EMEA
Service email: [email protected]
APAC
Service email: [email protected]
LATAM
Service email:
[email protected]
Aiswei Greater China
Service email: [email protected]
Hotline: +86 400 801 9996
Taiwan
Service email: [email protected]
Hotline: +886 809089212
https://solplanet.net/contact-us
https://play.google.com/store/apps/details?id=com.aiswei.international
https://apps.apple.com/us/app/ai-energy/id1607454432
Solar for Everybody AISWEI Technology CO., Ltd