NLG 074025 Wireless Remote Control of Ceiling Light User Manual

NLG 074025 Wireless Remote Control of Ceiling Light

Remote Control Instruction

• ALL ON: Turn on all the lamps
• ALL OFF: Turn off all the lamps
• GROUP1-4: Switch for each group.
• UP BUTTON: Dim up the brightness
• DOWN BUTTON: Dim down the brightness
• LEFT BUTTON: Min. level of brightness with 6% as night light
• RIGHT BUTTON: 4 step level of brightness (100 / 68% / 37% / 6%)
• LED INDICATOR: Indicates the successful press

Specifications.

Instructions

Teaching or grouping the remote control
After being grouped, the lamps can be controlled by the remote.
Turn on the lamps by wall switch and press one of the „GROUP ON“ buttons within 3 seconds 1x shortly. If the lamps flashes 3x slowly, pairing succeeded. Otherwise please turn off the lamps and restartthe grouping process.
!!! One lamp can be connected by max. 8 remote controls. One remote control can connect countless lamps.

Clear programming
To disconnect a grouped lamp, clearing the programming is needed.
Turn on the lamp by wall switch and press one of the „GROUP ON“ buttons within 3 seconds 5x shortly. If the lamp flashed 6x quickly, clearing succeeded. Otherwise please turn off the lamp and restart the clearing process.

Single group controlling
To control a certain group of lamps, press the „ON“ button with the group number and the group of lamps will be under control of the remote.

Overall controlling
To control all groups of lamps, press the „ALL ON“ button and all lamps will be under control of the remote.

Different functions

• Timing function for turning off the lamp:
  Press the „ON“ button with the group number until the lamp flashes 1x.Press the right button shortly, the LED indicator flashes 1x, and the lamp turns off automatically after 15 minutes.
  Clear setting: Press the „ON“ button with the group number until the LED indicator flashes 1x.

•  Short press the right button: The lamp reaches its maximum brightness.

• Long press the right button: No function

• Timing function for turning off the lamp:
  Press the „ON“ button with the group number until the lamp flashes 1x. Press the down button shortly, the LED indicator flashes 2x, and the lamp turns off automatically after 30 minutes.
  Clear setting: Press the „ON“ button with the group number until the LED indicator flashes 1x.

• Short press the down button: The lamp gets dimmed down in steps of 10%.

• Long press the down button: The lamp gets dimmed down continuously.

• Timing function for turning off the lamp:
  Press the „ON“ button with the group number until the lamp flashes 1x. Press the left button shortly, the LED indicator flashes 3x, and the lamp turns off automatically after 45 minutes.
  Clear setting: Press the „ON“ button with the group number until the LED indicator flashes 1x.

• Short press the left button: The lamp reaches its minimum brightness.

• Long press the left button: No function

• Timing function for turning off the lamp:
  Press the “ON” button with the group number until the lamp flashes 1x. Press the up button shortly, the LED indicator flashes 4x, and the lamp turns off automatically after 60 minutes.
  Clear setting: Press the “ON” button with the group number until the LED indicator flashes 1x.

• Short press the up button: The lamp gets dimmed up gradually.

• Long press the up button: The lamp gets dimmed up continuously.

Memory function
After using the remote control to adjust the brightness, the brightness will be saved for each group.
When turning on the lamps for the next time, they will light at the same brightness.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>