SHENZHEN GREENJOY TECHNOLOGY CO LTD GDS PRO-SE Portable Launch Monitor User Manual

SHENZHEN GREENJOY TECHNOLOGY CO LTD GDS PRO-SE Portable Launch Monitor

Product Information:

The Portable Launch Monitor is a high-speed camera launch monitor that is designed for both indoor and outdoor use. It features a portable and floor type design, making it easy to carry and install. The monitor can be connected to both mobile apps and PC terminals for use. It includes various product models such as GDS PRO, GDS PRO-SE, GDS PRO-ME, GDS PRO-MX, GDS PRO-AE, and GDS PRO-UE.

Launch Monitor:

• Status light: The launch monitor’s status light appears blue flashing during startup (5 seconds) to reset the device IP. The IP returns to factory mode (192.168.1.147) after the reset process, which involves flashing the on/off indicator light 3 times before the monitor restarts.
• Charging port: To charge the monitor, it needs to be connected to a 24V adapter.
• Ethernet port: The monitor has an ethernet port for connecting a gigabit network cable and a network port for monitor calibration and playing golf.

Laser Positioner:

• Battery cover: The laser positioner has a battery cover that can be opened to access the 12V battery with a 23A rating.
• Switch button: Pressing the switch button shoots a cross laser line from the laser port.
• Laser emission port: The laser port emits a cross-shaped laser line for monitor calibration.
• Magnetic base: The laser positioner can be connected to the laser installation slot using the magnetic base for fixation.

Protective Cover:
The protective cover is used to protect the launch monitor and ensure proper placement. It has a height adjustment base with three levels of height adjustment, corresponding to an increase of 1cm, 2cm, and 4cm.

Placement Position:
The placement position of the monitor and tee should be on the same horizontal plane with an error of less than 0.5cm. The point of the laser cross is the tee point, and the X-axis direction is the hitting direction. If the launch monitor is placed below the tee position, the height adjustment base can be used to adjust it to the same horizontal plane as the tee position.

Product Usage Instructions

Connect to Mobile App:

1. Download Golfjoy lite from the official website of Golfjoy, Apple Store, or Android Store, and register.
2. Turn on the monitor and open the Golfjoy lite app.
3. Search for the Bluetooth connection in the app and bind it to the monitor.
4. After successful binding, you can enter various modes in the app to play golf. Refer to the video tutorial for more information.

Connect to PC Simulator:

1. Use a gigabit network cable to directly connect the monitor to a PC computer network port (gigabit).
2. Set the PC network port IP to the monitor IP (factory default 192.168.1.147) in the same network segment (192.168.1.X).
3. Modify the simulator configuration file by changing the IP to the monitor IP (192.168.1.147) and configuring the type of launch monitor to GDSPLUS.
4. Open the simulator to start playing golf. Refer to the video tutorial for more information.

Upgrading:
When new features are added to the monitor, a new firmware version will be released for upgrade. There are two ways to upgrade:

1. Self-upgrade through the app. Refer to the video tutorial for more information.
2. Upgrade through self-service prompts on the PC terminal. Refer to the video tutorial for more information.

User’s Manual for Portable Launch Monitor

Product Description

Portable Launch Monitor is one of Best Launch monitors with the high-speed camera.
With a portable and floor type design, it’s easy to carry and install.
Moreover, it supports both indoor and outdoor.
Finally, it can be connected to both mobile apps and PC terminal for use.
Portable Launch Monitor includes the following product models,GDS PRO,GDS PRO- SE,GDS PRO-ME,GDS PRO-MX,GDS PRO-AE,GDS PRO-UE.

Product introduction

Launch monitor

Status light:
The Launch monitor appears blue flashing during startup (<15 seconds);
After the startup is completed, the blue light is constantly on;

When connecting to APPs or PC software, it would turn to green light after recognizing the ball.
After the ball is shot, green turns to blue.

Infrared light

• 1ST step, after successfully connecting to the APP or PC terminal, the first gear is always on (only visible with a mobile camera)
• 2nd step, after recognizing the ball (with a green status light),the second gear is always on (visible to the naked eye).

Camera

• It is one of most important functional modules positioning balls.
• It should not be obstructed during the process of hitting balls and the exterior of the lens should be kept clean and tidy for a long time.

Instruction

Laser positioner mounting slot: The laser is attached to the mounting slot through a bottom Magnet.
（Battery indicator）：
（Power on and off button）：

Power on and off button

Short press the on/off button to turn on/off the monitor.
After turning on, the on/off button indicator light will always light blue;
When the monitor is turned on, press and hold the On/Off button (>5 seconds) to reset the device IP (IP returns to factory mode: 192.168.1.147).
The monitor reset process involves flashing the on/off indicator light 3 times before the monitor restarts.
Charging port: To charge the monitor, it connects to a 24V adapter.
Ethernet port: Connecting a gigabit network cable and a network port for monitor calibration and playing golf.

Instruction

• Battery: Power the monitor
• Battery cover：
  Buckle both sides inward and pull outward to remove the battery.

Laser Positioner

Instruction:
Battery cover: Open the battery cover, and the inside is a 12V battery with a “23A” rating.

Switch button:
Press the switch button to shoot a “cross” laser line from the laser port.

Laser emission port:
The laser port emits a “cross” shaped laser line for monitor calibration.
Magnetic base: Connect to the laser installation slot for fixation

Protective cover

Instruction :

1. It includes a protective cover and a height adjustment base;
   The two are connected through the bottom center connection port, and then the base is fixed by rotating it 90 °.

2. The height adjustment base has three levels of height adjustment, corresponding to an increase of 1cm, 2cm, and 4cm.

Placement position

Instruction:

Requirement: The placement position of monitor and Tee should be on the same horizontal plane (with an error of less than 0.5 cm).

1. As shown in the figure, the point of the laser “cross” is the Tee point, and the X-axis direction is the hitting direction.
2. If launch monitor placed below the Tee position, the height adjustment base can be used to adjust launch monitor to the same horizontal plane as Tee position.

User Guide

1. Connect to APP for use (mobile or IPAD)
2. Download “Golfjoy lite” from the official website of Golfjoy, or Apple Store or Android Store, and then register.
3. After monitor is turned on, open the “Golfjoy lite” app and search for the Bluetooth to connection.
   After successful binding, you can enter various modes in the app to play golf, as shown in the following video tutorial.

Connecting to PC simulator for use

1. Use a gigabit network cable to directly connect the monitor to PC computer network port (gigabit), and connect the PC network port IP to the moniotor IP (factory default 192.168.1.147) in the same network segment (192.168.1. X).
2. Modify simulator configuration: Change the IP in the simulator configuration file to the monitor IP (192.168.1.147), and configure the type of Launch monitor to GDSPLUS.
3. Open the simulator for playing golf. See the following video tutorial

Upgrading

• When there are new features added to the monitor, a new firmware version will be iteratively upgraded. There are 2 ways to upgrade: one is to self upgrade through the APP;
• The second is to upgrade through self-service prompts on the PC terminal.
• The 2 upgrade methods are shown in the following video tutorial.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>