Fos-Lighting KZ ASX HiFi Bass Balanced Armature Earbuds Owner’s Manual
- June 13, 2024
- FOS Lighting
Table of Contents
Fos-Lighting KZ ASX HiFi Bass Balanced Armature Earbuds
Product Information
| Product Name | KZ ASX |
|---|---|
| Technical Details | Wireless in-ear monitor system, frequency range UHF 86 |
| Product Video | [Click here to watch the product |
video](product_video_link)
Accessories
| Accessory Name | Description |
|---|---|
| IEM-100 | Replacement memory foam for KZ earphones, 3 pairs (Large, |
Medium, Small)
KZ Silicone eartips| Silicone eartips for KZ earphones, 3 pairs (Large,
Medium,
Small)
KZ APTX-HD BT| Bluetooth 5.0 cable for KZ earphones, C type, AptX
KZ OFC FLAT CABLE| Cable for KZ earphones, 3.5mm plug, C pin type
KZ ABS Case| High-quality plastic case for KZ earphones
Product Usage Instructions
To use the KZ ASX wireless in-ear monitor system, follow the steps below:
- Make sure the KZ ASX earphones are fully charged.
- Turn on the KZ ASX earphones by pressing the power button.
- Put the earphones in pairing mode by pressing and holding the Bluetooth button until the LED indicator starts flashing.
- On your Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Select “KZ ASX” from the list of available devices to pair with the earphones.
- Once paired, you can start playing audio through the KZ ASX earphones.
- Adjust the volume using the controls on your device or the volume buttons on the earphones.
- To turn off the earphones, press and hold the power button until the LED indicator turns off.
Note: For detailed instructions on using the KZ ASX earphones with
specific devices or features, please refer to the user manual provided with
your device or visit the product page for additional resources.
Professional 20-unit pure balanced armature acoustic earphones, impedance:
20Ù, sensitivity 106db, frequency: 10-40000HZ, light weight 27g, high-
performance aluminum hardware, 3.5mm plug, 3 channel guide tone, electronic
crossover
TECHNICAL DETAILS
Details
- 20-unit balanced armature earphones. Industrial design.
- 4 frequency divider, 3 channel guide tone. Ergonomic design, comfortable fitting
Technical Specifications
- Impedance: 20 Ù
- Frequency range: 10 – 40,000 Hz.
- 3,5 mm plug type.
PHOTOS
PRODUCT VIDEO
ACCESSORIES
- Wireless in-ear monitor: system, freq. range UHF St
- Replacement memory: foam for KZ earphones, 3 pairs
- Silicone eartips for KZ
- Bluetooth 5.0 cable for KZ
- Cable for KZ earphones, 3,5mm plug, C pin type.
- High-Quality plastic case for KZ earphones.
- www.fos-lighting.eu
Documents / Resources
| Fos-
Lighting KZ ASX HiFi Bass Balanced Armature
Earbuds
[pdf] Owner's Manual
KZ ASX, KZ ASX HiFi Bass Balanced Armature Earbuds, HiFi Bass Balanced
Armature Earbuds, Bass Balanced Armature Earbuds, Balanced Armature Earbuds,
Armature Earbuds, Earbuds
---|---
References
- TCPDF
- KZ ABS Case | Fos Technologies
- KZ APTX-HD BT | OLD Products | Fos Technologies
- KZ Memory Foam | Fos Technologies
- KZ OFC FLAT CABLE | OLD Products | Fos Technologies
- KZ Silicone eartips | Fos Technologies