tzumi Soundmates ANC True Wireless Earbuds User Guide
- September 7, 2022
- Tzumi
Table of Contents
Soulmates ANC True Wireless Earbuds
User Guide
Introduction & Features
SOULMATES ANC is your solution for true wireless freedom and high-quality audio. Stereo sound and active noise-canceling technology let you hear music and phone calls the way they were meant to be heard, while the compact charging carries case makes them perfect for keeping up with everyday life.
Features:
Noise-Cancelling
5hrs play/talk 4 x Recharge in case
Bluetooth 5.0 Auto-Pairing
Product Overview & Contents
- SOULMATES ANC earbuds
- Charging carry case
- Type-C cable
- Small, medium & large earbud tips
Pairing With Your Devices
- Remove earbuds from the case.
- Open the Bluetooth pairing list on your device and click on “Soundmates ANC”
- Your device should now be paired and ready for use.
Charging
- Place earbuds in the case and they will automatically begin charging if the case has remaining power.
- The indicator light on the charging case will flash red while charging.
- The earbuds LED will light red while the earbuds are charging and will turn off once fully charged.
- After a full charge, the lights on the case will turn solid red.
- Recharge carry case via the included Type-C cable.
Power ON
- Remove your earbuds from the charging case to auto Power ON.
- Or touch the R or L earbud for 2 seconds to hear “Power On”.
Power OFF
- Place your earbuds back into the charging case.
- Or touch your earbuds for 5 seconds to hear “Power OFF”.
Answer
- Touch R or L earbud 1 time End Call
- Touch R or L earbud 2 times
Rejecting a call
- Touch and hold R or L earbud 2 seconds until! hear a prompt sound
Play/Pause
- Touch R or L earbud 2 times
Next Song
- Touch R earbud 3 times
Rewind/Previous Song
- Touch the L earbud 3 times
ANC MODE
- Touch and hold R earbud 2 seconds until you hear “Noise Cancelling ON” or “Noise Cancelling OFF”
Reset Earbud Pairing
- Remove both earbuds from the charging case.
- Make sure both earbuds are powered off. Touch both the Left and Right earbuds 10 seconds before hearing “Device Pairing” can clear connection records and all devices.
- The earbuds will auto-pairing again to hear “Soundmates connected”.
- Open the Bluetooth pairing list on your phone and click on “Soundmates ANC” to connect your phone.
Remark: Make sure both earbuds are powered off.
Specifications
Bluetooth Version | V5.0 |
---|---|
Battery (Earbuds) | Lithium Battery (40mAh each) |
Battery (Charging Case) | Lithium Battery (500mAh) |
Charging Port | Type C |
Input Voltage | 4.5-5.5V (Supports max. 12V voltage protection |
Earbuds Charging Time | 1.5h (approximately) |
Case Charging Time | 2.5 hrs (approximately) |
Playing Time (ANC is off) | 5 hrs (approximately) |
Playing Time (ANC is on) | 5 hrs (approximately) |
Case Recharged Earbuds | 4 Time (approximately) |
Standby time (earbuds in the charging case) | 180 days |
Frequency | 20-20k Hz |
Safeguards
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
- Do not expose the device to extremely high or low temperatures as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children.
- This unit is not a toy.
BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are
environmentally sate when fully discharged. Please refer to your local and
state laws for battery disposal procedures. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.lf this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
SoundMates Distributed by Izumi Inc. NY. NY, 10016. ©Copyright 2021 Izumi Inc. All Rights Reserved. Made In China. All other trademarks and tradenames are the property of their respective owners. Subject to change without prior notice.