Shenzhen Rakwireless Technology RAK2171 WisNode TrackIt Set User Guide
- June 6, 2024
- Shenzhen Rakwireless Technology
Table of Contents
Shenzhen Rakwireless Technology RAK2171 WisNode TrackIt Set
Welcome to WisNode TrackIt
Track your most precious assets with WisNode TrackIt. Place it on your
vehicle, luggage and even on your kids, and they are on your radar in the
WisNode TrackIt app. The latest in GPS and LoRa technologies help you to
create your own private network and also allow you to join existing LoRaWAN
networks to find your TrackIt device and share it to the cloud.
In addition, WisNode TrackIt features an off-grid messenger to stay in
continuous touch with your asset.
Getting Started
- Download and install the WisNode TrackIt app on your phone from Google Play or Apple App Store.
- Sign in with your RAK ID or sign up for a new RAK ID if you don’t have an account already.
- Once you’re signed in, enable Bluetooth on your phone.
- Power on the TrackIt device by holding down the Power button for at least 3 seconds. Next, press the Function button to see a flash on the device. The flash confirms the device is switched on and working correctly..
- Start the pairing procedure on your phone to add the TrackIt device.
- Do not move your phone away from the device during the pairing process.
- Upon successful pairing, start tracking the device on the app.
Important: Do not immerse the device in water or other liquids. Do not strike, throw or put pressure on the device. Always use the charger that comes with your device, or optionally a compatible charging adapter. Do not leave the device in direct sunlight or wet environments for long periods.
Product Specifications
Product Specificati ons
Light| LED
Bluetooth| Bluetooth 4.2
__
Navigation
| __
GPS/Glonass
Sensor| Six-axis (Gyro + Accelerator)
Battery| 400mAh
Charging Port| Contact charging point
Transmitted Power| Peak MAX 1W
Battery| Lithium Battery
Weight| 25g
---|---
Dimensions| 42mm42mm18m m
Operating Temperature| -20 ～ 60 ℃
Operating Range| Up to 6 mile
Button function list
| Product | Button name | Function List |
|---|---|---|
| Function name | Action | Light |
| WisNode TrackIt | Power/SO S button | Power on |
| hold on for 3 seconds** | Red/Vibr ate |
Power off
Send SOS| Press five times| Red flash
Cancel SOS| Red flash off
Function Button| Charging| Charging| Blue breath
Full battery| 100%| Green
Low battery| ≤ 20%| Red
H elp & Support
Should you have questions or concerns regarding the device, usage, safety, or maintenance, you can reach help & support from the app’s menu.
Correct disposal of this product:
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Warnings!
- For your safety, do not use the device on the plane, near hospitals, pacemakers, or any other areas/times that restrict the use of electronic devices.
- Do not use near gas stations or any other dangerous environments (areas that might contain inflammable gas, gun powder, or other flammable substances).
- Do not use in areas/times that restrict wireless electronic products.
- Immediately stop using the product if you see smoke, unusual smell, heat or find anything unusual about the device’s state.
- Do not open the device. Do not modify, alter, reverse engineer, tamper with, or repair the device.
- Simplified EU Declaration of Conformity
- MODEL: RAK2171
- Operating frequency range: 863-870 MHz
- Max. output power: 14 dBm
- Operating frequency range: 2402-2480 MHz
- Max. output power: 10 dBm
- Manufacture: Shenzhen RAKwireless Technology Co.,Ltd.
- Room 506, Bldg B, New Compark, Pingshan First Road, Taoyuan Street, XiLi Town Nanshan District, Shenzhen, China
Importer:
| Company | Address |
|---|---|
| Allnet | Maistr. 2, Munich 82110 Germering, Germany |
| Marcom SRL (marcomweb) | **Via della Metallurgia 11, 37139 Verona, |
Italy**
Hereby, [Shenzhen RAKwireless Technology Co., Ltd] declares that the radio
equipment type [RAK2171] is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
https://downloads.rakwireless.com/LoRa/RAK2171/Certification/RAK217
1_CE_DOC.pdf
FCC Compliance
This product complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which
can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to a socket on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Pursuant to Section 15.21 of the FCC rules, changes or modifications to a product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. The product meets the FCC Radio Frequency Emission Guidelines and is certified with the
FCC under the FCC ID number found on the device.
IC Certification
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RSS-102 Statement:
This equipment complies with Innovation, Science and Economic Development
Canada’s radiation exposure limits set forth for an uncontrolled environment.