DEWENWILS HRS101K2 Remote Control Outlet User Manual
- June 10, 2024
- dewenwils
Table of Contents
DEWENWILS HRS101K2 Remote Control Outlet
Specifications
- Operation Mode ON-OFF-ON
- Current Rating 15 Amps
- Operating Voltage 125 Volts (AC)
- Contact Type Plug in
- Connector Type Plug, wireless
- Brand DEWENWILS
- Terminal Through Hole
- Material Polycarbonate
- Item Dimensions L x W x H 1 x 2.4 x 1.7 inches
- Mounting Type Plug-In Mount
- Item weight 66 Ounces
- Item Model Number HRS101K2
- Batteries 1 AAA batteries required.
Description
Easily set up without the need of tools; plug in and use; no programming or configuration necessary; Make your life practical, safe, and energy-efficient; ideal for the elderly and those with restricted movement or back problems; comes with a 12V 23A battery; both ETL and FCC accredited. Strong RF signal does not require line of sight between the remote control and outlet plug with the separate ON/OFF button; it operates through walls and doors without any interference and has a range of up to 100 feet in open spaces. It frees up the higher power outlet, is smaller than the majority of other indoor remote control outlets, fits easily behind furniture and in tight places, and allows furniture to be pushed up against the wall. Work with most home appliances; perfect for interior lighting fixtures, Christmas tree lights, lamps, fans, hard-to-reach outlets, and other electrical equipment; high power rating of up to 15A/1875 watts, 1/3HP. However, you are free to add additional Dewenwils remote controls, plugs, and light sockets (Same Model Only) to expand your remote system or alter the combinations after the remote controller and receiver have been pre-programmed.
Product Analysis
Product Dimensions
Features
Programmable & Expandable
- Allow you to install additional outlets, light sockets, and handheld remote controls (only for the same model from Dewenwils).
- Increase the freedom to expand your remote system.
Note:
- Before utilizing the remote switch, please remove the battery insulation.
- Remember that this switch only controls power on/off; it is incompatible with equipment that has an electronic switch. This (or any other) power control switch won’t function with your gadget if it doesn’t instantly turn on after being unplugged.
3 Prong Space Saving Side Outlet Plug
- Receivers that plug electrical devices in from the side can easily fit in small places or behind furniture.
- enables furniture to be pushed up against a wall, which is perfect for cramming into small spaces behind furniture like a sofa, nightstand, or headboard.
- One bottom wall socket is required for small size.
100 Ft Remote Control Range In Open Area
- A powerful RF signal can pass through doors and walls.
- No line of sight is necessary between the plug-in receiver and the remote control.
- The wireless range may be somewhat shorter than 100 feet in actual use due to electronic gadgets, walls, and other physical obstructions.
Make Your Life Easier And Comfortable
- Ideal for pregnant women, the elderly, and people with back problems or limited mobility;
- Make it easier, safer, and more energy-efficient for you to live.
- Eliminate Unstable and Troublesome WIFI Control Switches
- There is no complicated setup required, and WIFI signal strength is unimportant.
How To Pair
- A regular electrical outlet should be used to power the DEWENWILS HRS101K2 remote control outlet.
- Find the tiny button or switch on the outlet with the labels “Learning” or “Code.” Press and hold this button until the outlet’s LED indication begins to flash.
- Choose the preferred channel or button that you wish to couple with the outlet on the remote control that came with the outlet. The majority of remote controls include numerous channels or buttons, enabling you to separately manage a number of outlets.
- While pointing the remote control at the outlet, press and hold the correct button. Throughout this process, maintain a fair distance between the remote and the outlet.
- The LED indicator on the outlet will cease blinking after a short while, signifying a successful pairing. The linked appliance or gadget should also respond, such as turning on or off.
How To Clean
- Before beginning the cleaning process, make sure the outlet is turned off and unplugged from the electrical socket.
- Wipe the outlet’s external surface lightly using a soft, dry cloth. Any dust or dirt that may have accumulated will be helped to remove by this.
- Use a similar method to clean the remote control that came with the outlet if necessary. To get rid of any dirt or fingerprints, wipe the surface of the remote control with a dry cloth.
- Do not clean the outlet or remote control with liquid cleansers, sprays, or solvents. These have the potential to malfunction or harm electronic components.
- Use a soft-bristled brush or a cotton swab dipped in isopropyl alcohol for confined spaces or crevices. Remove any dirt or debris by gently cleaning those areas.
- Before use the outlet or the remote control after cleaning, make sure they are both totally dry. This will stop any potential moisture-related harm.
- Reconnect the outlet to the electrical socket once it has dried, then use the remote control to check that it works. Make that the outlet reacts to the remote requests properly.
FAQ’s
Can I use the DEWENWILS HRS101K2 Remote Control Outlet with any appliance?
The DEWENWILS HRS101K2 Remote Control Outlet is compatible with a wide range of appliances and electronic devices, as long as they meet the power requirements of the outlet (maximum load of 1250W).
How many outlets are included in the package?
The DEWENWILS HRS101K2 Remote Control Outlet package includes two remote control outlets. Each outlet can be controlled independently using the included remote control.
Can I control multiple outlets with one remote control?
Yes, you can control multiple DEWENWILS HRS101K2 outlets with one remote control. The remote control supports multiple channels or buttons, allowing you to pair and control multiple outlets separately.
How far is the remote control range?
The remote control has a range of up to 100 feet (30 meters) in an open area without obstacles. However, the range may be shorter if there are walls or other obstructions between the remote control and the outlet.
Can I use the outlet with a power strip or surge protector?
Yes, you can use the DEWENWILS HRS101K2 Remote Control Outlet with a power strip or surge protector. Ensure that the power strip or surge protector can handle the maximum load of the outlet and that it is properly rated for the connected devices.
Is the remote control battery included?
Yes, the remote control comes with a battery included. It is usually a small, commonly available battery type such as a CR2032.
Can I program the outlet to a specific channel or button?
Yes, you can program the DEWENWILS HRS101K2 outlets to specific channels or buttons on the remote control. This allows you to have personalized control over each outlet.
Can I use the outlets outdoors?
No, the DEWENWILS HRS101K2 Remote Control Outlets are designed for indoor use only. They are not waterproof or weather-resistant, so they should not be exposed to outdoor elements.
How many devices can I control with one remote control outlet?
You can control one device per outlet. However, by using multiple DEWENWILS HRS101K2 Remote Control Outlets, you can control multiple devices independently with the same remote control.
What is the warranty for the DEWENWILS HRS101K2 Remote Control Outlet?
The DEWENWILS HRS101K2 Remote Control Outlet typically comes with a limited warranty. The specific warranty details may vary, so it is recommended to check the warranty information provided by DEWENWILS or the retailer from where you purchase the product.
What is remote outlet?
Remote control outlets connect to your wifi network allow you to remotely control devices you have plugged into them using your phone. When connected to a compatible voice assistant like Alexa or Google Home you can control the smart remote control outlets with your voice.
What is outlet used for?
Electrical outlets (also known as outlets, electrical sockets, plugs, and wall plugs) allow electrical equipment to connect to the electrical grid. The electrical grid provides alternating current to the outlet.