SIRUI T-1005 Aluminum Travel Tripod Instructions
- June 10, 2024
- SIRUI
Table of Contents
- SIRUI T-1005 Aluminum Travel Tripod
- Product Information
- Product Usage
- Know the Product
- Leg Angle Adjustments and Folding
- Extend or Retract the Tripod Legs
- A_use of the Center Column
- Convert the Detachable Leg into a Monopod
- Change the Rubber Feet to Spiked Foot
- Uso of Mounting Scrow, Set Screw, and 1/4*-20 Accessory Port.
- Series Tripod Data Chart
- Attention
- WARRANTY CARD INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SIRUI T-1005 Aluminum Travel Tripod
Product Information
The T-1 MP-TLMLB is a tripod with a weight of 100g and dimensions of 648x210mm when folded and 72x105mm when collapsed. It is compatible with the T-1005/T-1205 tripod series and has a 1/4”-20 accessory port for mounting various accessories. The tripod can support a maximum weight of 1.50/3.31 kg and has a maximum height of 1600/63.0 mm. The mounting screw can be flipped over, and the center column can be flipped over for low-angle or macro shooting.
Product Usage
- Attach the T-1 tripod to the T-1005/T-1205 series tripod using the mounting screw.
- Use the 1/4”-20 accessory port to mount various accessories on the tripod.
- For low-angle or macro shooting, remove the bottom part of the center column to get an Allen key, flip the center column over, and reattach it to the tripod.
- Adjust the legs of the tripod to the desired height and angle.
- Attach your camera or other equipment to the tripod using the mounting screw.
- Use the set screw to secure your camera or equipment in place.
Know the Product
Leg Angle Adjustments and Folding
Extend or Retract the Tripod Legs
A_use of the Center Column
Convert the Detachable Leg into a Monopod
Change the Rubber Feet to Spiked Foot
Uso of Mounting Scrow, Set Screw, and 1/4*-20 Accessory Port.
Series Tripod Data Chart
T-1005: 8.51.04 14.5/0.57 100630 1540/60.6 520/2015 430 169 1600 630
38/152 1.50231 10/205
T-1205: 851.04 14.50.57 186 30 1540/60.6 520/205 430169 1600 530 38 152
1.20/2.65 10/22.05
- Know your Product (Fig.1)
- Leg Angle Adjustments and Folding The Tripod can be adjusted to 3 angles (22°, 52°, 82°). Press the button and lift up the leg to about 90°, the button will automatically click back in place and lock the leg angle automatically. Close or fold up the tripod legs as Fig.2-1 to Fig.2-4.
- Extend or Retract the Tripod Legs (Fig.3-1 and Fig.3-2) Loosen the Leg Lock Knobs with 1/2 turn clockwise all at the same time or separately to extend the Leg Sections to the desired length, lock the Leg Sections by turning the Leg Lock Knobs counter-clockwise from large to small. Retract the Leg Sections from small to large by loosening or locking the Leg Lock Knobs.
- The hook under the center column can be removed and used as an Allen key. The center column can be reversed for low-angle shooting. (Fig.4-11 to Fig.4-4)
- Convert the Detachable Leg into a Monopod (Fig.5-1 to Fig.5-3) The Detachable Leg of the Tripod can be converted into a Monopod, and connected with the Long Center Column for the additional height of the Monopod.
- Change the Rubber Feet to Spike (Fig.6-1 and Fig16-2) Loosen and remove the Rubber Feet for changing to Spike.
- 7. Use of Mounting Screw, Set Screw, and 1/4 screw accessory mounting hole. (Fig.7).
Specifications of products may be changed without notice.
Attention
- Do not exceed the recommended load limit of the head and/or tripod. (Please refer to product specifications.)
- Please make sure that the locks are securely tightened when in use.
- This product should not be used in environments that exceed the following conditions (-40 ~+‡ +100 C/-40~+212 F). And, when used in damp, dirty or dusty environments, please clean and dry thoroughly after use. to assure proper functioning in the future. It is not recommended to expose this product to saltwater. If exposed, please clean with mild soap and warm water and towel dry.
- Please keep from high temperatures and direct exposure to bright sunlight for extended periods of time A Raeard does sintersave the equipment alone in a public place, which can be an inconvenience or > a place to lacur camera gear, please remove it from the tripod/ball head when transporting from
- Please use a soft towel with warm water and mild soap to clean the locking system and gliding parts when necessary. Towel dry before storing the tripod.
- Under most situations, there is no need to lubricate any parts of this product. The addition of most lubricants will gum up the mechanisms and reduce their normal gliding characteristics. Please call or email us if you have any questions or special needs.
- Please keep this product away from all electrical power sources.
WARRANTY CARD INFORMATION
Dear SIRUI Customer,
Thank you for your purchase of SIRUI Professional Products! SIRUI warrants
that your purchase is free from defects in materials and workmanship under
normal use during the Limited Warranty Period. The Warranty begins on the
original date of purchase on your sales receipt and is not transferrable. If
service is required, a copy of the sales receipt must be included with an
explanation of the problem.
- Model:
- Store:
- Date
- Serial Number:
Warranty coverage can differ from region to region. Please see the contact information below for product registration, information, and service for the region the product was purchased in. SIRUI 6 (six) Year Limited Warranty (3 Year Warranty for Electronic Parts). This warranty shall be limited to repair, adjustment, and/or replacement at SIRUI or its authorized distributor’s option, of defective parts, free of charge (except the cost of transportation to the distributor/service center). Responsibility is limited to the actual cost of the item. Call or Email with questions and service before sending any product to the center in your region. Below is a listing of contact information for Product Registration, Service Inquiries, and Questions.SIRUI will not be responsible for expenses or inconveniences, consequential damages to equipment, or by breach of any expressed or implied warranties
Limitations:
The warranty is not transferable. This warranty covers all defects encountered
in the normal use of the equipment and does not apply in the following cases:
- If the equipment has been serviced by other than an authorized SIRUI Service Center.
- Damage to the equipment is due to modification (including but not limited I the removal of ball head clamps), overloading, mishandling, abuse, accident sand corrosives, water damage, or not following operating instructions.
- No valid proof of purchase is provided.
- Damage caused by acts of nature (including, but not limited to fires, floods o earthquakes). Warranty coverage can differ from region to region. Please see the contact information below for product registration, information, and service for the region the product was purchased in.
Warranty Address and Contact Information:
(Please contact the seller or the local distributor where the product was
purchased for warranty issues or questions and before any product is sent.)
Guangdong SIRUI Optical Co., Ltd.
The Third Industrial District, Wuguishan Town, Zhongshan City, Guangdong,
China
- Tel:0086-760-88897373
- Fax:0086-760-88207062
- Http: //www.sirui.com.
- E-mail: info@sirui-photo.com
- Service Hotline: 0086-400 830 2299
- Complaint Hotline: +86-181 6563 9388
- (Monday to Friday: 8:15am~12:15pm, 14:00pm~18:00pm)
SIRUI USA, LLC
-
Add: 29 Commerce Court Verona, NJ 07044 www.sirui.com.
-
Service: Toll-Free 866-373-0829 E-mail: info@sirui.com
FOR PRODUCTS PURCHASED IN THE USA PLEASE SEE: -
For full details on USA Warranty Terms and Limitations: https://www.siruiusa.com/warranty.html.
-
To register products: https://www.siruiusa.com/product-registration.html.
European Service Center
- Add: SIRUI Optical GmbH
- Ernst-Augustin-Str. 1a 12489 Berlin Germany
- Phone: +49 30 991 94 94 00
- Email: Info@siruioptical.eu.
CAUTION
Please remove the camera from the tripod when changing the position of the
tripod. Do not place the tripod, with a camera attached, over your shoulder or
carry the tripod horizontally by the legs. Strong shaking may cause damage of
the screw in the mounting plate and/or the camera. Please extend the legs from
the biggest tube to the smallest tube; close the legs from the smallest tube
to the biggest tube, to avoid leg joint bushing damage.
GUANGDONG SIRUI OPTICAL CO., LTD.
- Add: The Third Industrial District, Wuguishan Town, Zhongshan City, Guangdong, China (Zip Code: 528458)
- Tel: 86-760-88897373
- Fax: 86-760-88207062
- E-mail: info@sirui-photo.com.
- Website: www.sirui.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>