ION Luxe LP Three-Speed Turntable User Guide

ION Luxe LP Three-Speed Turntable User Guide

Product Information

The Luxe LPTM is a turntable that allows you to listen to your vinyl records. It has a built-in Bluetooth transmitter that allows you to wirelessly stream music to any Bluetooth-enabled speaker. The Luxe LP also has RCA outputs and an Aux In for connecting to other audio devices. It comes with a USB cable for connecting to
your computer and a free EZ Vinyl/Tape Converter software for digitizing your vinyl records.

Specifications

• Output Power: 2 x 2 W (peak)
• Drivers: Low-Frequency: 2 x 3 / 77 mm woofer
• Range: Up to 100 feet / 30.5 meters
• Stylus: Conical, ruby-tipped included
• Connection: barrel
• Dimensions (width x depth x height): 16.1 x 12.99 x 5.7 (410mm
  x 330mm x 145mm)

Trademarks and Licenses

ION Audio is a trademark of in Music Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.

Product Usage Instructions

Setup:

1. Place the unit on a stable, level surface, away from any strong magnetic fields.
2. Remove the plastic stylus cover from the cartridge.
3. Remove the twist-tie used to secure the tonearm during shipment.
4. Optional: Connect an output device to the RCA Output and an input device to the Aux In.
5. Optional: Use the included USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer.
6. Connect the power cable to an available power outlet.
7. Turn the Volume/Power Knob on the top panel to turn the unit on.

Features:

• Platter: Place your record here.

• Tonearm: Tracks the groove in a vinyl record.

• Arm Clip: This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.

• Raise / Lower Lever: Raises and lowers the tonearm.

• Auto stop switch: This switch turns autostop on or off. When autostop is on, the platter will start spinning.

• Bluetooth Volume: This knob is used for adjusting the volume of a connected Bluetooth speaker.

• Volume/Power Knob: This knob is used both for powering on Luxe LP and adjusting the speaker output volume. To turn Luxe LP on or off, simply turn the knob. To adjust the volume, turn the knob left and right. TIP: Due to the nature of Bluetooth, the Luxe LP speaker’s output and the Bluetooth speaker’s output
  will be out of sync. Turn this volume down when transmitting to a Bluetooth speaker.

• Headphone Input: Connect headphones (sold separately) to listen to your vinyl playback.

Luxe LPTM

Quickstart Guide

Support

For the full the full User
For the full User Guide and the latest information about this product, visit ionaudio.com.
For complete warranty information: visit ionaudio.com/warranty.

Technical Specifications

• Output Power: 2 x 2 W (peak)
• Drivers: Low-Frequency: 2 x 3” / 77 mm woofer Range: Up to 100 feet / 30.5 meters
• Stylus: Conical, ruby-tipped included Connection: barrel
• Dimensions (width x depth x height):  16.1″ x 12.99″ x 5.7″  (410mm x 330mm x 145mm)
• Frequency Response: 100 Hz – 10 KHz (+3/-10 dB)
• Bluetooth Specifications: Profile: A2DP, AVRCP
• Cartridge Type: Ceramic
• Power: Via power adapter (12 VDC, 1 A, center-positive, included)
• Input Voltage: 100–240 VAC, 50/50 Hz V AC, 50/60 Hz Consumption: 15 W
• Weight: 8.45 lb. (3.83 kg)

Trademarks and Licenses

ION Audio is a trademark of in Music Brands, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.

Quickstart Guide

Box Contents

• Luxe LP Power Adapter
• Dust Cover Felt Slipmat
• 45 RPM Adapter USB Cable
• Quickstart Guide Safety & Warranty Manual

Important
Visit ionaudio.com/ez-converter to download the free EZ Vinyl/Tape Converter software.

Setup

1. Place the unit on a stable, level surface, away from any strong magnetic fields.
2. Remove the plastic stylus cover from the cartridge.
3. Remove the twist-tie used to secure the tonearm during shipment.
4. Optional: Connect an output device to the RCA Output and an input device to the Aux In.
5. Optional: Use the included USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer.
6. Connect the power cable to an available power outlet.
7. Turn the Volume/Power Knob on the top panel to turn the unit on.

Features

Top Panel

• Platter: Place your record here.

• Tonearm: Tracks the groove in a vinyl record.

• Arm Clip: This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.

• Raise / Lower Lever: Raises and lowers the tonearm.

• Auto stop switch: This switch turns autostop on or off. When autostop is on, the platter will start spinning when the tonearm is placed over the record and stop spinning when the record has reached the end. (When autostop is off, the platter will always spin regardless of the position of the tonearm.)

• 33 / 45 / 78 Switch: This switch controls the RPM of the turntable platter.
  Note: For best results when playing 78 RPM vinyl records, use a 78 stylus (sold separately). Only use a 78 stylus with 78 RPM vinyl records. Purchase the 78 stylus at ionaudio.com.

• Bluetooth® Button: Press this button to start Bluetooth pairing. To cancel or exit pairing mode, press the Bluetooth button again. The LED will blink when pairing with a Bluetooth device, and remain solid once fully paired. If currently connected to a Bluetooth speaker, press this button to disconnect from the speaker.

• Aux Input: Connect a CD player, digital media player, or other audio source to this 1/8” (3.5 mm) stereo auxiliary input. The audio from the Aux Input is also transmitted over a Bluetooth connection.

• Bluetooth Volume: This knob is used for adjusting the volume of a connected Bluetooth speaker.

• Volume/Power Knob: This knob is used both for powering on Luxe LP and adjusting the speaker output volume. To turn Luxe LP on or off, simply turn the knob. You will feel a click when Luxe LP turns on. To adjust the volume, turn the knob left and right.

• TIP: Due to the nature of Bluetooth, the Luxe LP speaker’s output and the Bluetooth speaker’s output will be out of sync. Turn this volume down when transmitting to a Bluetooth speaker.

• Headphone Input: Connect headphones (sold separately) to listen to your vinyl playback.
  Rear Panel

• USB Audio Output: Use the included USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer. Visit ionaudio.com/ez-converter to download the free EZ Vinyl/Tape Converter software.

• Power Cable Input: Use the included adapter to connect to wall power.

• RCA Output: The audio from a playing vinyl record is sent to this line-level speaker audio output. Warning: The RCA Outputs are line-level. Please only connect these to line-level inputs. You may damage your receiver if you plug in a line-level device into a phono-level input.

Connecting Luxe LP to a Bluetooth Speaker

Luxe LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.
   Note: Move other Bluetooth receivers/speakers out of range of Luxe LP (30’/9.1m or more) or turn them off to connect to your Bluetooth speaker.

2. Power on the Luxe LP turntable.

3. Press and release the Bluetooth button on Luxe LP to start pairing to your Bluetooth device. Once Luxe LP is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth speaker should also indicate that it is paired.
   Note: Luxe LP will connect to the closest Bluetooth speaker that is near it. If after 20 minutes no Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive and the LED will turn off. Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.

4. Play music on your Luxe LP turntable. If you are connected to a Bluetooth speaker with a play/pause button, and do not hear audio, try pressing the play/pause button.

5. Adjust the volume on your Bluetooth speaker (if applicable) or the Bluetooth Volume knob on Luxe LP to control the output level.
   TIP: Due to the nature of Bluetooth, the Luxe LP speaker’s output and the Bluetooth speaker’s output will be out of sync. Turn this volume down when transmitting to a Bluetooth speaker.

6. To disconnect, power off the Luxe LP turntable or turn off Bluetooth pairing on your Bluetooth speaker.

References

• Sound Experiences | ION Audio
• Support : ION Audio
• ionaudio.com/warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>